Copper Wall Lights and Sconces

Large copper wall lamp, model 7307, designed by Finnish designer Paavo Tynell for Idman in Finland, 1950s. This large, rare copper wall lamp was designed by Finnish lighting pioneer...

A cute bijou wall lamp by Lisa Johansson-Papé for Orno-Stockmann. The lamp features a stunning minimal design of an L-shaped bent acrylic arm in clear colour adding to the lightness ...

A patinated copper and yellow tinted glass wall light designed and produced in Sweden, 1940s. Overall Dimensions (inches): 11.5” H x 10” W x 13” D  Back Plate Dimensions (inches): 4...

BX2 Wall Lamp by United Alabaster Dimensions: D 42 x W 42 x H 12 cm (Customizable Height) Materials: Alabaster, Copper (Matt Black finish) Also Available: Satin Gold, Nickel, Matt Bl...

A black-lacquered metal, copper and white opaline glass wall light produced by Lorentzons, Norway, c. 1950s. Overall Dimensions (Inches): 13.5"H x 8.75"W x 3.25"D Back Plate Dimens...

Inspired by the art-deco architecture, this lamp gets a contemporary touch to the form of the overlapping arches. This lamp replicates the idea of repetitive arch patterns with fine ...

- Solid copper shade and body - Takes E27 fitting bulbs - Suitable for use outside - Designed by Poul Henningsen - Made by Louis Poulson - Danish ~ 1950s - 50cm wide x 30cm tal...

An exceptional pair of Art Deco corner wall sconces made of patinated copper, produced in Czechoslovakia in the 1930s. Designed to fit seamlessly into wall corners, these sculptural ...

A pair of brass, copper and white pink opaline glass wall lights designed and produced in Sweden, c. 1950s. Light scratching present on brass backplate and arms. Overall Dimensions...

A pair of copper and glass wall lights designed and produced in Italy, 1960s Overall Dimensions (Inches): 6.0"H x 6.0"W x 3.0"D Back Plate Dimensions (Inches): 5.25"H x 2.25"W x 1....

Pair of Hans-Agne Jakobsson 'Mini-Tratten' raw copper outdoor sconces. An exclusive made for U.S. and UL listed authorized re-edition of the classic Swedish design executed in raw co...

A freeform copper wall light designed and produced in Sweden, c. 1970s. Oxidation present to copper Wear consistent with age and use Overall Dimensions (Inches): 18.5"H x 12.5"W x...

Beautifully hand-hammered using the metalworking technique known as repoussé (where low-relief images are rendered from the verso side), this pair of three-light sconces dates to the...

Made from the copper off-cuts of previous projects, the Patch sconce was inspired by the idea of quilting, with each layered piece attached by copper rivets. Shown here with a plug a...

A pair of copper, glass and white fabric wall lights designed and produced in France, c. 1950s. Wear consistent with age and use. Overall Dimensions (Inches): 10.75"H x 16.25"W x 5...

Two stylish plexiglass and enameled copper wall sconces totally hand-crafted in Italy by Paolo De Poli, they work 110-240 volts and need regular e 14 bulbs. Hand-Painted with two dif...

Nice set of 4 pine and copper wall lamps. They provide a warm atmosphere and even better when lighted. Made of thin stripes of pine delicately nailed with a brass nail to the copper ...

A pair of oak, copper and burlap wall lights, designed and produced by Nils H. Ledung, Sweden, 1960s. Overall Dimensions (inches): 10.87"H x 4.5"W x 4.37"D Backplate Dimensions (in...

A oak and copper sconces designed by Hans-Agne Jakobsson and produced Elysett AB, Sweden, 1970s. Originally constructed as planter light, later fitted for wall mounting. Fixtur...

A copper and blown glass wall light designed by Ture Berglund and produced by Skansen Glas, Sweden, 1940s. Overall Dimensions (Inches): 11.5” H x 7” W x 11.875“ D Back Plate Dimens...

The floor lamp comes with 1 x E14 / E15 Edison screw fit bulb holder, is wired and in working condition. It runs both on 110/230 Volt. Delivery without bulb. We have the matching wa...

Pair of impressive and rare brutalist two lights sconces designed by Marcello Fantoni, circa 1970s. The large sconces crafted of patinated, tubular forms of various sizes. Fitted with beautiful textured golden...

Roller WS Small Wall Lamp by United Alabaster Dimensions: ⌀ 10 x H 90 cm (Customizable Height) Materials: Alabaster, Copper (Matt Black finish) Also Available: Satin Gold, Nickel, Ma...

A pair of copper and white opaline glass wall lights designed and produced by ASEA, Sweden, c. 1950s. Overall Dimensions (Inches): 12.125” H x 3.25” W x 5.5“ D Back Plate Dimension...

Set of three extremely rare and highly decorative Mid-Century Modern sconces. Designed & manufactured probably in Scandinavia, 1960s. Executed in partly enameled and perforated co...

Denmark, 1990 Petite Copper outdoor sconces made by Nordlux. 3”w x 4.5”d x 7”h Ref. L5395 $ 1,800 ea ( 2 avail )

A sizeable copper and acrylic wall light designed and produced by Falkenbergs Belysning, Sweden, 1960s. Overall Dimensions (inches): 20” H x 13” W x 14” D Backplate Dimensions (inc...

Amisto - solid copper, brass and steel shade in white cream. Pink(ish) copper and brass are polishes but not painted/ coated (coated on request). Lamping: 1 x E26/E27 We can make...

A copper and teak wall light designed and produced in Sweden, c. 1960s. Overall Dimensions (inches): 7.25 ” H x  8.875” W x  3.875“D Back Plate Dimensions (Inches):  7.25” H x 8.875...

Nice set of 3 pine and copper wall lamps. They provide a warm atmosphere and even better when lighted. Made of thin stripes of pine delicately nailed with a brass nail to the copper plate that is the back and sides. Minimal details. When can get more upon request. ______________________________________________________________ Hans-Agne Jakobsson naît à Hvadhem sur l’île de Gotland en Suède. Menuisier de formation, il poursuit à Göteborg des études d’architecture qui lui permettent d’intégrer le département de design industriel au sein de General Motors. Très vite, sa passion du bois le rattrape et il s’oriente alors vers des créations plus artisanales. Il devient ainsi le collaborateur de designers célèbres tels que Carl Malmsten ou le très radical Werner West. De ces années d’apprentissage naît une profonde passion pour la lumière, la subtilité et la magie de l’éclairage. Installé dès 1950 à Markaryd dans le sud de la Suède, il propose ses créations dans sa boutique du centre-ville. L’anecdote raconte qu’un soir de Noël, trouvant son espace trop sombre, il crée dans l’urgence une suspension en pin. Son succès est tel qu’il décide de fonder en 1951 sa propre entreprise Hans-Agne Jakobsson A/B. La région de Markaryd est une région bordée de lacs et de bois sombres. Jakobsson ne s’inspire pas directement de la nature mais de l’atmosphère si particulière qui se dégage de ces paysages, où la lumière semble être en conflit perpétuel avec la nuit. Influencé par le modernisme, il s’intéresse également très tôt aux nouveaux matériaux qui apparaissent dans les années 1950. Le laiton le passionne tout particulièrement. Il l’associe naturellement au verre pour créer des modèles dont les plus monumentaux orneront les bâtiments publics, les salles de concert ou les églises. Il n’oublie pas pour autant les intérieurs de ses contemporains et crée de nombreuses lampes, lampadaires ou appliques n’ayant pour frontières que les limites de son imagination. Viendront au milieu des années 1960 les modèles en laiton et fils de soie qui connaissent un immense succès et propulsent Jakobsson parmi les créateurs les plus influents de sa génération. Le travail d’un autre grand créateur, le danois...

Pair of French Art Nouveau copper wall sconces with a single arm and gilt fleur de lis front panels and shades. (PRICED AS Pair)

This very decorative wall lamp was designed and made by RAAK in the 1960s. It is made of black sheet metal that has copper tubes at one side for a stunning light effect. Also the top...

A pair of Copper Fluted sconces by Larry Lubov have an architectural feel in warm copper and the scope and size that turns heads to create statement lighting. The sconces are designe...

Wall light in copper with reflector, 90° right angle arm and clear glass. For outdoor use (IP44). Lamp LED 230V E27 4W 2700K Retro A60. Main power 230V 50Hz.

A copper and milk glass wall light designed and produced in Sweden, c. 1940s. Overall Dimensions (inches): 16” H x 7.5” W x 13.5” D Stated dimensions include shade. Backplate Dime...

A brass, copper and opaline glasss wall light designed and produced in France, c. 1950s. Overall Dimensions (inches):  7.75” H x  13” W x  5.75“D Back Plate Dimensions (Inches):  4....

A pair of copper, raffia and oak wall lights designed and produced by Nils Ledung, Sweden, c. 1960s. Overall Dimensions (inches):  10.875” H x 4.5 ” W x  4.375“D Back Plate Dimensio...

Superb and sleek modern LU Wall sconces pat cop by Lumfardo Luminaires in patinated unlacquered copper. Candelabra based sockets. Lightbulbs included. ...

Hans-Agne Jakobsson 'Tratten' polished copper outdoor sconce. An exclusive made for U.S. and UL listed authorized re-edition of the classic Swedi...

A copper and white fabric wall light designed and produced in Italy, c. 1940s. Overall Dimensions (inches): 12” H x 13” W x 7” D Back Plate Dimensions (inches): 4” H x 4” W x .75”D ...

AD 1930 Wall Lamp by United Alabaster Dimensions: D 9 x W 15 x H 70 cm (Customizable Height) Materials: Alabaster, Copper (Matt Black finish) Also Available: Satin Gold, Nickel, Matt...

A pair of green-lacquered copper and glass wall lights designed and produced in Sweden, c. 1970s. Reshoot as a pair. Old numbers are 13464 & 5235. Overall Dimensions (inches): 9” H ...

A pair of oak, burnished copper and raffia wall light, designed and produced by Nils Ledung, Bankaryd, Sweden, c. 1960s. Overall Dimensions (inches): 11.2...

A pair of copper and white fabric wall lights designed and produced in Sweden, 1940s. Overall Dimensions (inches): 10.5” H x 4.25”  W x 5” D Back Plate Dimensions (inches): 2.75”  H...

Niermann Weeks Lulu Nine-Light Crystal and Sunshine Gold Leaf finish Metal Floor Lamp. Features three lights on three levels. Very and very stable. Measures 20" in width, 20" in dep...

Pair of Niermann Weeks 'Neapolitan' Crystal and Copper Metal Two Light Wall Sconces Measures 9" in width, 6" in depth and 24.5" in height.

A copper, brass and glass sconce/ wall light designed and produced by Nils H. Ledung, Sweden, 1960s. Dimensions of back plate (inches) : 8.68 x 2.78 x 0.84 (height x width x depth...

A hammered copper and beige fabric wall light designed and produced in Sweden, c. 1950s. Overall Dimensions (inches): 15” H x 4” W x 4.25” D Bulb Specifications: E-14 Bulb Number of...

A pair of two-armed copper and glass wall lights, designed and produced in Italy, 1950s. Overall Dimensions (inches): 9.25" H x 5.8" W x 3.5" D Bulb Specifications: E-14 Bulb Number...

A burnished copper, raffia and stained oak wall light designed and produced by Nils Ledung, Sweden, c. 1960s. Overall Dimensions (inches): 10” H x 4.4” W ...

6 English Arts & Crafts (Secessionist-style) copper wall sconces with linen fold design and embossed decorations. (priced each).

Large pair of 1950's custom made metal wall lights with curved copper diffusers decorated with random oversized perforations creating a night sky full of stars. The rectangular light...

"Starlite" stunning handmade curved copper perforated wall sconces.Halogen up and downlight.

A set of 4 French 1930s copper Art Deco sconces with double light, scrolling motif on arms. Sold in Pairs. Measurements: Height: 11" Depth: 5.5 " Width/Length: 10"

A copper, brass and oak wall light designed and produced in Sweden, c. 1960s. Wear consistent with age and use. Overall Dimensions (inches): 13.37”H x 6.5”W x 6.62”D Backplate Dim...

This is an authentic industrial table lamp converted from an old EOW copper and brass bulkhead lamp. Originating from German sea going vessels built d...

Rare pair modernist V-317 wall-lamps, designed by Hans-Agne Jakobsson. Sheet metal painted white (original finish), upper shade in brushed copper finish. Manufactured by AB Markaryd...

A pair of oak, copper and raffia wall lights designed and produced by Nils H. Ledung, Sweden, 1960s. Backplate Dimensions (inches): 10.88" H x 1" W x 1.13" D Fixture is set as a ha...

A pair of circa 1940's Italian hammered copper and gilt metal sconces with interior lights. Measurements: Height: 13" Width: 15.5" Depth: 8".

Hans-Agne Jakobsson Polished Copper 'Tratten' Pendant. An exclusive made for U.S. and UL listed authorized re-edition of the classic Swedish design from Jakobsson, Executed in polis...