Plastic Side Chairs

One of 18 stackable dining room chairs by Charles & Ray Eames for Herman Miller, manufactured in midcentury, circa 1970 (late 1960s or ear...

One of 22 stackable dining room chairs by Charles & Ray Eames for Herman Miller, manufactured in midcentury, 1974. The chairs are labeled ...

Designed in 1993 by Gaetano Pesce, the 543 Broadway Chair is a rejection of hyper-rational industrial design. A master of resin and color, the Broadway chair features molded resin se...

Designed in 1993 by Gaetano Pesce, the 543 Broadway Chair is a rejection of hyper-rational industrial design. A master of resin and color, the Broadway chair features molded resin se...

This classic Post-Modern design by Massimo and Lella Vignelli for Knoll International is called the 'Handkerchief' stacking chair, labelled underneath with early production (original...

Set of Four 1970s clear lucite seats and backs with orange aluminum frames. These Plia folding chairs are designed by Giancarlo Piretti for Castelli. Made in Italy. The Plia chair is...

Erwine & Estelle Laverne invisible series Lucite and polished aluminum Champagne swivel chair. New leather cushions. Rare, clean early examples. Fully signed on bottom: Laverne, NY...

Verner Panton's cantilevered stacking chair (1960) was the first single-material and single-form chair to be made and has been produced by Vitra through three decades of development ...

Kartell also offers a stool version of the Masters chair, winner of the Good Design Award 2010 and the Red Dot Award 2013, and a worldwide best seller. The legs are lengthened and the seat is shrunk, but the frame's unmistakable graphic look, created by the weave of the silhouettes of three iconic chairs, remains the same. Masters Stool...

An armchair with a distinctive two–part shape, the padded shell embraces the huge seat cushions. Its curves are shown off by the total absence of sharp corners and the softness of th...

Mix and match the wildest graphics designed by Toiletpaper and get the most iconic dining room of all. - Material: fabrics in polyester, frame in wood with polyurethane padding an...

Mid Century Modern DSS stacking dining side chairs designed by Ray and Charles Eames for Herman Miller circa 1960s. These collectible molded fiberglass shell seats are available in g...

A pair of black-painted metal and fiberglass side chairs designed by Rene-Jean Caillette, France, 1957. Seat height: 17"

Set of 4 classic armchairs "H-Base" designed by Charles and Ray Eames in 1961 produced by Herman Miller. All the chairs are originally marked under seating. The chairs have a Off Whi...

The Panton chair is an important icon of modern design and has a fascinating history as Verner Panton experimented with a variety of materials to best realize the design. The most co...

This classic lucite Z chair is a great occasional piece in very good original condition. The transparent quality and minimal form allow it to work in an...

Moss Brown Formless Fiberglass Chair by kar Unique Piece Dimensions: W 64 x D 54 x H 68 cm. Materials: Fiberglass. Available in Moss Brown or Jade colors. Please contact us. As eac...

Italian Space Age pair of red plastic chairs by Carlo Bartoli for Kartell, 1970s Pair of chairs with rounded shapes, in red plastic with removable l...

Scroll down and click "view all from Seller" to see more than 400 other unique products. (2.2) The Ribbon chair is the object that expresses the female language of Nika Zupanc with ...

A exceptional example of mid-century French design, this rare tulip chair was created by Pierre Guariche for Steiner and produced in fiberglass in the late 1950s. Guariche was known ...

This set of side chairs by Charles and Ray Eames are post-war classics. The seats are elephant hide gray fiberglass with olive green naugahyde upholstery and they sit on cast aluminu...

The Jetson bar chair is part of the Tala collection designed by Egg designs and manufactured in South Africa. This Futuristic style bar chair has a clear ...

This is a 40/4 Side Chair, initially designed by David Rowland in 1964. This particular chair dates to 1979. This iconic form has been praised as one of the most ingenious modern designs of the 20th century, and has been credited for being the first truly stackable chair. This example is important as it was formerly utilized in Skidmore, Owings, and Merrill's Chase Manhattan Bank project. The chair maintains its original tags. SOM was the firm that originally helped to make the 40/4 chair a viable product. They ordered 17,000 of them for UIC Chicago, which helped Roland and the product thrive afterward. The chair has a solid steel sled base, and has a black plastic seat and back. This example was manufactured by GF Business Equipment...

Koki Pocci + Dondoli · 2015 MATERIAL: integral polyurethane The contract world enters the domestic space with the Koki range of chairs with a contemporary, fresh design. A perfect b...

These are Eames DSR Chairs, originally designed by Ray and Charles Eames in the 1950s. These particular examples were produced by Herman Miller in the USA in the 2010s. These chairs ...

Rare wrought iron chair in original condition designed by Allan Gould.

The Jetson dining chair is part of the Tala collection designed by Egg Designs and manufactured in South Africa. This Futuristic style dining chair has a ...

Pony chair upholstered with red textile. This iconic seat was originally designed by Finnish designer Eero Aarnio in 1972. It features a metal frame and foam upholstery, covered with...

Set of 4 Stackable 40/4 Chairs By David Rowland in Dark Brown Recognized as the first stackable chair, the 40/4 Chair is a feat of Design, elegance and ergonomics; encompassing the ...

This is a Cylindra Dining Chair, originally designed by Henry P. Glass and produced by Richbilt Manufacturing Company in the 1950s. The chair is comprised of a walnut frame and has a...

This is a set of six DSR Side Chairs, originally designed by Charles and Ray Eames for Herman Miller in the 1950s. These particular examples were produced in the United States in 201...

This is an Eames DAW Chair, originally designed by Ray and Charles Eames in 1950. These particular examples were produced by Herman Miller in the USA in 2022...

Fabulous pair of acrylic folding chairs in soft "barely" lavender. Designed with heavyweight chrome frames, and thick, bent acrylic seats and backs, in a Minimalist, Postmodern sty...

This is an Upholstered Diiva Dining Side Chair, designed by Grazia Materia for Grazia & Co. in Australia in 2014. These examples were produced ca. 2022. They have a seat and back uph...

These are 422 Bull Dining Chairs, originally designed by Mario Bellini for Cassina in 2008. These particular examples were produced in the 2010s. Their design features a steel struct...

Set of 4 vintage white fiberglass Eames chairs by Herman Miller. All original, not a recent edition. Stamped under.

20th c., Italy, Enrico Pellizzoni oxblood saddle-stitched leather over metal frame and seat. These chairs were designed by Grassi & Bianchi. An embossed leather mark is present on th...

This sleek and elegance Ricciolina chairs are stylish and functional. The distinctive curved connection between the seat and backrest gives the chair flexibility and ergonomics. ...

This is an Eames DSW Side Chair, initially designed by Ray and Charles Eames for Herman Miller in 1948. This example was produced by Herman Miller in the USA in 2018, and the listed ...

Simple and elegant set of 10 heavy duty stacking chairs in white plastic, not vinyl, by AIR. Lucite feet on all the legs, chairs are in excellent condition with minimal wear. Stacki...

Superb set of 6 tubular lucite & brass dining chairs with a Gothic shaped high back rest, designed by Charles Hollis Jones in the 1970. Very detailed with brass tip to the backrest ...

Spaghetti chair with white cording attached to a white lacquered frame designed by Giandomenico Belotti and manufactured by Alias. Italy 1980s. A symbol in the history of design,...

Very rare and finely restored Walnut armchair with new beautiful De Ploeg Wool fabric. Designed by architects Lietti and Motta and produced by Gaetano and Alessandro Besana of Mari...

Tiny Rohe Noordwolde 'Model 149' baby bamboo hoop chair. Bamboo seat with rattan wrapping and black enameled metal tubular frame. This cute child's sized hoop chair is a fun, shrunken version of the popular full size hoop chair. In original condition original condition with some visible patina and enamel loss consistent with its age. Styled with bamboo Rocking Horse...

Stylish mid century side chair having a tubular steel frame and plastic string wrap upholstered seat and back. The chair is in very good, condition showing only light cosmetic wear n...

1990s. These chairs are made in ivory plastic material. They might show slight traces of use since they're vintage, but they can be considered as in good original condition with few...

This item is part of the private collection of Casey Godrie and is situated in his private house. Ask him for competitive shipping quotes. His incredible Dune Villa, Amsterdam Beach...

Kartell Dr. Glob black modern pair of chairs. The Dr. Glob chair was designed by the acclaimed designer Philippe Starck for Kartell in Italy. Fashioned from two different materials, ...

René Herbst, 'Sandows' chair, model N.5, plated steel, elastic rope, France, design 1928, produced 2000's. The 'Sandows' chair epitomizes the industrial advancements of the twenties...

Iconic chair designed by Charles & Ray Eames for Herman Miller. Molded fiberglass shell in seldom seen Ochre Light Color.. Mounted on vintage black steel H-base. chair in very good ...

Pair of original "Spaghetti" chairs in red by Giandomenico Belotti (1922-2004) for Alias, Italy, circa 1979. One of his most popular and successful designs, it always amazed me how c...

Stunning Lucite and brass vanity chair designed by Charles Hollis Jones, the original and first design was in brass and commissioned by Lucille Ball...

Wonderful Mid-20th Century MCM or Mid Century Modern Tulip side chair No. 115 by Burke comprised of a white fiberglass armless shell or frame & round stationary 4 prong fiberglas...

This is a Tonon Dining Arm Chair that was produced in Italy and dates to the 1980s. The chair is comprised of a wooden frame with a seat and back that are upholstered in a red fabric...

Bent bamboo lounge chair by Dutch manufacturer Rohe Noordwolde, featuring a rounded bucket-style seat and back built from vertical bamboo spindles. The continuous bamboo frame curves...

This is a Risom side chair, Model 666C-WB, designed by Jens Risom for Knoll in 1943. This example dates to 2020. The design features a lacquered maple frame, and has tan cotton webbi...

This sophisticated Mid-Century Modern side chair was realized in the United States, circa 1970. It features a curved back and arms created from a single piece of translucent Lucite. ...

The Tulip Chair 103 (and the Tulip Chair 115/116), designed by Maurice Burke of Dallas, Texas, for Arkana, are the bedrock of Star Trek. The Burke Tulip chairs are the first cousins ...

Iconic fiberglass Hoodie chair designed by architect Jordan Mozer for award-winning Nicaraguan-born Chef Michael Cordua's famed Américas restaurant in Houston, Texas. *Drawing/render...

20th century vintage white fiberglass chair of space age design with futuristic curves. In the style of the Orbit chair by Walter Grunder and M...