Airplane Wing

Man then wants to fly and designs and uses airplanes, wing suits, hang gliders. Here I simply use them for a petite 18 mm high x 6 mm wide {5/8ths x 3/16ths inch} ribbed earring.

Flying wing airplane model with engine. For decoration only.

This exceptional oversized dining table has a perfect and fluid design with amazing airplane wing movement at its edges and a fabulous striped walnut wood, with a beautiful and sober...

Sculptures made of translucent polyester stretched on shaped frames, these pieces hark back to Metcalf’s early fascination with the spatial dynamics of fabric stretched over the fram...

Sculptures made of translucent polyester stretched on shaped frames, these pieces hark back to Metcalf’s early fascination with the spatial dynamics of fabric stretched over the fram...

Sculptural paintings made on translucent polyester stretched on shaped frames, these pieces hark back to Metcalf’s early fascination with the spatial dynamics of fabric stretched ove...

Early and rare test model of an airplane Wind Tunnel Bi-plane. This model was used to find out the flying ability of the aircraft's design. Hand made from wood with steel components...

Modern Wall Art? A rare section cut from a authentic WWII DC-9 wing tab. It has been cleaned and painted professionally with high gloss yellow powder coat paint. Its 17" wide, ...

Achieving simple shapes in a range of gray tones through applications of acid on the plate, the artist directs one’s eye to the basic geometry of the markings on the airplane wing. ...

Achieving simple shapes in a range of gray tones through applications of acid on the plate, the artist directs one’s eye to the basic geometry of the markings on the airplane wing. ...

Achieving simple shapes in a range of gray tones through applications of acid on the plate, the artist directs one’s eye to the basic geometry of the markings on the airplane wing. ...

Achieving simple shapes in a range of gray tones through applications of acid on the plate, the artist directs one’s eye to the basic geometry of the markings on the airplane wing. ...

Achieving simple shapes in a range of gray tones through applications of acid on the plate, the artist directs one’s eye to the basic geometry of the markings on the airplane wing. ...

Unique 21st century desk designed as the extended piece of an aluminum riveted airplane wing. On three metal strut shaped legs.

Modern industrial silver “airplane” wing writing desk table for the home or office.

Anne Sager (American, 1930-2024), Airplane Wing, Chromogenic Print, with artist's estate stamp to verso, unframed.

Wimbledon-Furniture Wimbledon-Furniture is delighted to offer for sale this hand made airplane wing dining table known as the Mosquito Table designed by Sir Terence Conran and was m...

Desk made from an airplane wing

.SOLD NOVEMBER 2010...Peter Hamburger's exquisitely modern form in extruded shaped lucite and chromed metal "airplane wing shade". Sensous, modern lighting sculpture.

A heavy stainless base supports the bundle, beginning in a thick profile similar to an airplane wing, twisting subtly as it rises and flattens at the top, again beautifully joined wi...

It is a high-end piece of cabinetry with airplane wing edges and a slender but very sturdy base.

This Designer Pendant Light was inspired by the frame from an airplane wing. It's the ultimate in modern lighting.

Crafted in solid oak, it features four sliding doors and two front drawers with sculptural, airplane wing-shaped handles. The panels are finished in textured black and grey laminate,...

During WW II, Howell made bombs and shells along with airplane wing sections and with the war ending went back to making their steel furniture.

Their aerodynamic shape is inspired by the shape of an airplane wing. The top is made of plywood and is covered with authentic aluminium sheet.

In the box are an additional set of airplane wings in case you want to convert it into a bi-wing airplane.

Unique and very rare mixed-metal wall sculpture of three bi-wing airplanes over an airfield by Curtis Jere for Artisan House, circa 1970s.

His boards evolved over the years from designs with hundreds of holes drilled into it covered with a thin wood veneer, to a design with carved chambered out hulls, to finally a much ...

Today, the Wright Flyer III is displayed at the Dayton Aviation Heritage National Historical Park in Dayton, Ohio. It is the only fixed-wing airplane to be designated a National Hist...

Today, the Wright Flyer III is displayed at the Dayton Aviation Heritage National Historical Park in Dayton, Ohio. It is the only fixed-wing airplane to be designated a National Hist...

Unique 21st century desk designed as the extended piece of an aluminum riveted airplane wing. On three metal strut shaped legs.

Interesting three vintage hood car ornaments made of chrome, can not be mounted on car anymore, however converted to decorative wall hanging, some oxidization.

Funky four vintage car ornaments made of chrome, cannot be mounted on car anymore, however drilled and made available to use as decorative wall hanging in few deferent combination, s...

Attributes to Maison Regain, minimalist lines with airplane wing top.

Light weight and strong (like an airplane wing). All fastened with small copper and brass nails.

This designer pendant light was inspired by the frame from an airplane wing. It's the ultimate in modern lighting.

The image depicts the same scene showing an airplane wing and the ground below, but the scene changes dramatically with the different colors used for each state.

The printed signature is visible in the left bottom corner, just below the airplane's wing. Condition: Overall very good condition.

His boards evolved over the years from designs with hundreds of holes drilled into it covered with a thin wood veneer, to a design with carved chambered out hulls, to finally a much ...

His boards evolved over the years from designs with hundreds of holes drilled into it covered with a thin wood veneer, to a design with carved chambered out hulls, to finally a much ...

Today, the Wright Flyer III is displayed at the Dayton Aviation Heritage National Historical Park in Dayton, Ohio. It is the only fixed-wing airplane to be designated a National Hist...

section of an aluminum airplane wing

Cross section of an airplane wing model depicting the various applications involved in aircraft construction.

Nice machine age sculpture, warning light at tip of the wing functions as atmospheric light

Skinned Cessna tail wing half with custom light.

Pair of structural wing cross section models. Made of cedar wood and mahogany with varnish sealer. Great on a wall. Signed Albert Matuschak from Seattle.

Walnut bench upholstered in sand Rogers & Goffigon waxed linen. Orders for COM and custom sizes available, upon request.

This desk is made from a section of wing from a WWII US Army Air Corp DC-3 It has a acrylic top with a silver powder coat paint finish.

Awesome "airplane wing" desk, in mahogany with black border. fitted with 4 drawers on right & 3 drawers on left.

Arms have a thin side taper, almost like an airplane wing. Cushion supports are individually oval-shaped wooden dowels.

This wonderfully constructed dining table is built like a airplane wing. The table is incredibly strong and super light.

Spectacular and unique luxury desk made out of an original DC-9 Aero California airplane wing.The top is covered by a 10 mm thick glass .

A beautiful set of 9 airplane wing-shaped shelves in solid Rio rosewood and veneers, which hang without tools from dark brown metal uprights.

The aluminum body was constructed like an airplane wing at the Sargent Fletcher Company of El Monte, California.

The aluminum body was constructed like an airplane wing at the Sargent Fletcher Company of El Monte, California.

The aluminum body was constructed like an airplane wing at the Sargent Fletcher Company of El Monte, California.

Solid pine coffee table by anonymous designer measuring 34.5 x 105 x 75 cm

19th C French ash low table/coffee table. 1890 Top depth 47cm Thickness of top 3.5cm

This low-profile coffee table is defined by its clean, geometric form and sharp beveled edges. The hand-finished white surface is highlighted by a soft grey accent along the bevels, ...

Vintage French "Space Age" chrome coffee table with smoke colored glass table top. The chic 1970s table has a "log" like base and is in very good condition with wear according to age...

An exceptional and rare floating marble and giltwood console & mirror by Osvaldo Borsani, Italy, 1946. This listing is for one mirror and console but we do have a pair available, lis...

Amazing pair of brass mirror in the style of Gio Ponti, 1950s Very good vintage condition .

Marbled French abstract aquatint of flowing motion, 1963. Signed lower right. Original artwork on paper displayed on a white mat with a gold border. Archival plastic sleeve and Cert...

Rare pair of giltwood mirrors by Max Welz, circa 1930. Carved limewood with leaf gold and floral decorations - noteworthy is that the floral decor on the top are mirrored. Very good ...

Edgar chandelier, 5 lights, Ivory encased rigadin Murano glass by Multiforme Edgar Murano glass chandelier is one of those chandeliers in our collections that stands out thanks to it...

Paolo Buffa (1903-1970) Rare and very elegant wooden daybed Varnished walnut and fabric Model created circa 1940 H 58 × L 205 × W 95 cm Paolo Buffa was an Italian furniture des...

Carousel suspension lamp has a delicate balance of form and function that produces a quiet, modern light ambiance for all to savour, with its Contemporary Art Deco lines. The struct...

This sideboard cabinet, crafted in the 1960s by Alberto Salvati and Ambrogio Tresoldi, is a prime example of how neoclassical design principles were incorporated into midcentury Furn...

Introducing the Helen Sink—a tribute to timeless elegance and enduring family heritage. Named in loving memory of Sean’s late grandmother, Helen, this piece embodies grace, strength,...

Art Deco table lamp with nickel finish and glass rods.

A rectangular, vintage Mid-Century modern Italian full size floor mirror made of hand crafted wrought iron with its original mirrored glass, designed by Pier Luigi Colli in good cond...

A rare floating console and mirror (No6652) by Osvaldo Borsani designed for Casa Ramella Levis 1946 . Executed in gilded wood, marble and mirror a seamless hand carved looped coil a...

Large tall Pair of white penerello Murano glass and brass wall lights lightning pannel lamps sconces. Contemporary work from a small artisanal italian design workshop. In the mood of...

Max Ingrand for Fontana Arte wall mirror. c1960 Blue concave glass with bevelled mirror and brass surround. Mirror plate in very good condition with minimal age. Blue glass frame w...

Italian hand-carved oak wood bar cabinet with four folding doors and central interior shelf. Discover the essence of Italian style with our stunning contemporary oak wood bar cabin...

Great cocktail bar in the style of Gio Ponti, featuring a mirrored display cabinet and two stools. On patinated brass X frames, the bar cabinet has three individual wood sections wit...