Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 9

1930s Replica Tom Blake hollow wooden surfboard

About the Item

1930s Replica Tom Blake hollow wooden surfboard. Wooden panels joined by metallic fasteners with daffodil yellow outline. Patented by the late Tom Blake (1902-1994) in 1931. The interior ribbed design was modeled after the airplane wing, allowing for a significant reduction in weight without sacrificing strength. The design ushered in newfound interest in the sport of surfing due to the drastic weight reduction of the surfboard from 100 lbs to less than 50 lbs. Tom Blake has a number of inventions attributed to his name including the waterproof camera. A great example of a historical surfboard design that played a pivotal roll in the evolution of the sport.
  • Creator:
    Tom Blake (Designer)
  • Dimensions:
    Height: 158 in (401.32 cm)Width: 20 in (50.8 cm)Depth: 3.5 in (8.89 cm)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1960-1969
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Haleiwa, HI
  • Reference Number:
    1stDibs: LU5290235928952
More From This SellerView All
  • 1930s Vintage Hollow Wood “Kookbox” Early Surfboard
    By Tom Blake
    Located in Haleiwa, HI
    Mid-late 1930s “Kookbox” hollow wood surfboard. Features wood panels joined by metal fasteners and cork water-plug. Patented interior ‘Skin and Frame’ construction method, inspired by the design of airplane wings. This breakthrough surfboard building method was invented in the early 1930s by the legendary Tom Blake...
    Category

    Vintage 1930s American Sports Equipment and Memorabilia

    Materials

    Metal

  • 1930s Pacific System Homes Wooden Surfboard
    Located in Haleiwa, HI
    Late-1930s Pacific system Homes wood surfboard. Features an intricate design created with redwood and pine wood. Beautiful embellishments in the form of nose and tail blocks complete with an early style surfboard fin with low profile. This early surfboard weighs approximately 100 lbs. This incredible relic of surfing history has been held in the same Long Beach, CA family since new, handed down through several generations. This listing represents a seldom offered opportunity to own an remarkable early wooden surfboard from the 1930s. Little is known about the first Pacific System Homes boards, produced either in late 1929 or early 1930, except that they were made from redwood strips held together with lag bolts, and were probably 10 feet long and weighed about 70 pounds. Pine and redwood boards replaced the all-redwood boards by 1932; full-length redwood-edged balsa boards, weighing as little as 45 pounds and costing less than $40, were introduced in the mid-’30s. A swastika symbol—used by American Indians, Vikings, and Greeks as a sign of good luck and harmony—was wood-burned or print-marked onto the back of all Pacific System Homes’ Swastika boards up until 1937. The following year, after the swastika-decorated German military invaded Austria, Pacific System changed the line name to “Waikiki Surf-Boards.” The 1939 Waikiki board came in 10-, 11-, and 12- foot models, as well as a 14-foot paddleboard, and five- or six-foot “kiddie boards.” All were typical of the plank period: blunt-nosed, squared off at the tail, with near-parallel sides. Pacific System Homes boards were made in production runs of 15 on sawhorses in a designated dust-free area of the company’s 25-acre site, and were sold in beach clubs, sporting good stores, and high-end department stores like Robinson’s and the Broadway. Custom-made Pacific System Homes boards were also available, built by top California surfer-boardmakers like Pete Peterson and Whitey Harrison. California boardmaker Dale Velzy...
    Category

    Vintage 1930s American Sports Equipment and Memorabilia

    Materials

    Hardwood, Softwood

  • 1960s Replica Greg Noll Black Walnut Trophy Surfboard
    By Greg Noll
    Located in Haleiwa, HI
    Late-1960s replica Greg Noll Surf Center Hawaii wooden surfboard. Features a transitional-era (late 1960’s style) pintail shape made with one of the rarest a...
    Category

    2010s American Sports Equipment and Memorabilia

    Materials

    Fiberglass, Hardwood

  • 1970s Replica Owl Chapman Underground Hawaii Pintail Surfboard
    By Owl Chapman
    Located in Haleiwa, HI
    1970s Replica Owl Chapman Underground Hawaii pintail surfboard made in the early 2000s. Features beautiful amaranth and purple stain with complimentary glass-on single fin. Dual pins...
    Category

    Early 2000s American Sports Equipment and Memorabilia

    Materials

    Fiberglass, Foam, Softwood

  • 1968 Replica Lahaina Clinton Blears model surfboard by Dick Brewer
    By Dick Brewer
    Located in Haleiwa, HI
    1968 replica Lahaina Clinton Blears model surfboard. Shaped by the late Dick Brewer (1936-2022). Features very limited Brewer Lahaina plumeria flower logo which was used for a short ...
    Category

    2010s American Sports Equipment and Memorabilia

    Materials

    Fiberglass, Foam, Softwood

  • Vintage 1970s Lightning Bolt surfboard by Tom Parrish
    Located in Haleiwa, HI
    Mid-1970s vintage Lightning Bolt surfboard made by Tom Parrish. Features bright yellow tint with double rail lightning bolt pinstripes. Beautiful red lightning bolt design with complimentary black shadow. A remarkable example of highly coveted 1970s Tom Parrish shaped Lighting Bolt surfboard. In 1972, Gerry Lopez and Jack Shipley started the popular lightning bolt surfboards label in Honolulu...
    Category

    Vintage 1970s American Sports Equipment and Memorabilia

    Materials

    Fiberglass, Foam, Softwood

You May Also Like
  • Vintage Wooden Sled, 1930s-1940s
    Located in Uppsala, SE
    Wooden sled with metal runners under the rockers. The legs and rockers have the original red paint and the seat has its original dark stained wood with ve...
    Category

    Mid-20th Century Industrial Sports Equipment and Memorabilia

    Materials

    Metal

  • "Fractal Gun" Custom Wooden Marquetry Surfboard
    Located in Nr Abergavenny, Monmouthshire
    This is a unique custom surfboard featuring a marquetry deck, designed and hand-crafted by the w o o d p o p studio which specialises in marquetry and inlay work. The studio prid...
    Category

    2010s Wall-mounted Sculptures

    Materials

    Wood

  • 7'2 "Kaleidoscope" Custom Wooden Marquetry Surfboard
    By Emma Wood
    Located in Nr Abergavenny, Monmouthshire
    This is a unique custom surfboard featuring a marquetry deck, designed and hand-crafted by the w o o d p o p studio which specialises in marquetry and inlay work. The studio prides...
    Category

    2010s Welsh Mounted Objects

    Materials

    Wood

  • 6'4 "Kokomo" Custom Wooden Marquetry Surfboard
    By Emma Wood
    Located in Nr Abergavenny, Monmouthshire
    This is a unique custom surfboard featuring a marquetry deck, designed and hand-crafted by the w o o d p o p studio which specialises in marquetry and inlay work. The studio prides...
    Category

    2010s British Mounted Objects

    Materials

    Wood

  • Vintage Wooden Hat Form Mold, Vienna, Austria, 1930s
    Located in Nuernberg, DE
    Stunning beautiful wooden hat form mold, found at an estate sale in Vienna, Austria. Has the form of the typical Art Deco style. So we believe it was made in the 1920s. Nice decorati...
    Category

    Vintage 1930s Austrian Art Deco Models and Miniatures

    Materials

    Wood

  • Art Deco Wooden Airplane Aviation Model, France 1930s
    Located in Atlanta, GA
    Stylish Art Deco wooden airplane model mounted on a geometric wood and metal display. This Art Deco model airplane is in solid wood with a lovely warm patina. It has one large Lucite...
    Category

    Vintage 1930s French Art Deco Aviation Objects

    Materials

    Metal, Copper

Recently Viewed

View All