Polyester Sculptures

Yayoi Kusama Large Set of 2 Pumpkin Plush Yellow and Black & Red and White, 2004 Polyester, Nylon 6 × 9 9/20 × 9 9/20 in 15.2 × 24 × 24 cm (each)

Yayoi Kusama Yellow Pumpkin Mascot (Yellow and black), 2019 Parachute Nylon 3 9/10 × 3 × 3 in 10 × 7.5 × 7.5 cm

Yayoi Kusama Pumpkin Plush Red and White (Small), 2004 Nylon 6 x 9 2/5 in diameter 15.24 x 24 cm diameter

Yayoi Kusama Pumpkin Plush Yellow (Small), 2004 Nylon 6 x 9 2/5 in diameter 15.24 x 24 cm diameter

This figurative steel indoor sculpture challenges cultural norms about women. The finely detailed, provocative sculptures of Derya Ozparlak have secured her a unique place in the wo...

The Great Bear is a polyester sculpture by contemporary artist Eric Valat, dimensions are 160 cm × 95 cm × 90 cm (63 × 37.4 × 35.4 in). The sculpture is signed and numbered, it is pa...

Large Rearing Horse is a polyester sculpture by contemporary artist Eric Valat, dimensions are 200 × 145 × 60 cm (78.7 × 57 × 23.6 in). The sculpture is available in white, black, re...

Created in 2013, this wall-mounted urethane relief exemplifies Peter Alexander's enduring exploration of light, color, and perception. A leading figure of California's Light and Spac...

Created in 1968, this cast polyester resin sculpture belongs to Peter Alexander's groundbreaking early body of work that helped define California's Light and Space movement. Drawn to...

Created in 1968, this monumental cast polyester resin sculpture belongs to Peter Alexander's earliest and most celebrated body of work, produced during the formative years of Califor...

The Serval is a sculpture by French artist Eric Valat (b. 1961). Limited edition of 8 + 4 A.P. Born in Rodez (France) and trained at the École des Beaux-Arts in Toulouse, Valat has d...

"Tantalize, Synchronize, Exercise!" is an original metal, mirrored glass, polyester fibre, wire, plastic, and enamel paint artwork by Kendal Murray measu...

Turkish-born Derya Ozparlak is known for her provocative and uniquely beautiful hand-hammered sculptures. Rendered in fine detail, ‘The Deranged’ is a steel straight-jacket with a sh...

John Garrett was raised in southern New Mexico by parents who were both educators. They instilled in him an appreciation for the handmade with their collections of Native American a...

Created during Peter Alexander's pioneering exploration of cast polyester resin in the late 1960s and early 1970s, this Leaner exemplifies the body of work that established him as a ...

Created in 1967, this cast polyester resin sculpture demonstrates Peter Alexander's early mastery of geometry as a vehicle for exploring light, color, and perception. During this for...

John Garrett was raised in southern New Mexico by parents who were both educators. They instilled in him an appreciation for the handmade with their collections of Native American a...

Turkish-born Derya Ozparlak is known for her provocative and uniquely beautiful hand-hammered sculptures. Rendered in fine detail, a steel rendering of horse blinders...

BM Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base 27" x 10" x 11" "I am an artist, a sculptor not ...

Unique. Signed and dated -66 on the right side. Provenance: Galerie Bonnier, Genève Size with socle: 74x38x17 cm Arman explores reality. He strives to transform and sublimate art...

John Garrett was raised in southern New Mexico by parents who were both educators. They instilled in him an appreciation for the handmade with their collections of Native American a...

Fiberglass/carbon fiber with a burnished graphite finish on composite base "Don Frost, sculptor, creator of completely unique, innovative and original fine art. ""We can only truly...

The artist intends to modifie the human landscape with the abstract presence of his artworks. The point of starting to think this artwork, we can say that it is the same of the Fran...

This painted polyester sculpture is signed by the artist ‘Niki’ on the base. It is also numbered from the edition of only seven on the base. There were three artist’s proofs aside fr...

Small Bear Armchair is a polyester sculpture by contemporary artist Eric Valat, dimensions are 130 × 80 × 90 cm (51.2 × 31.5 × 35.4 in). The sculpture is signed and numbered, it is p...

Dreamer Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base 51 x 13 x 12 in "I am an artist, a sculptor...

"Cloaked Woman" Sculpture 50" x 15" x 6" inch by Sarkis Tossonian Sarkis Tossoonian was born in Alexandria in 1953. He graduated from the Faculty of Fine Arts/Sculpture in 1979. He ...

Judy Rushin-Knopf (1959) was born in Dallas Texas and lives in Tallahasee, FL. Her work addresses bodies, access, and connection. She has exhibited her paintings, sculptures, and tex...

Vliegende uil Flying Owl Polyester Cortensteel Big Bird Sculpture Evert den Hartog (born in Groot-Ammers, The Netherlands in 1949) followed his education to be a sculptor at the Rot...

This piece titled "Friendly Money Loan" is an original artwork made from paper, plaster, vinyl, acrylic, enamel, polyester, basswood, chain, wire, inkjet prints, and pastel by Drew Leshko. This piece measures 35"h x 16"w x 9"d. Drew Leshko is a Philadelphia, Pennsylvania-based artist. By carving, cutting, and layering varieties of paper and wood, Leshko creates documentary studies of architecture from his neighborhood in an attempt to create a three dimensional archive of buildings that are in transitional periods. The work examines gentrification and history, how historical relevance is determined, and most importantly, what is worth preserving. Working from observation and photographs, the artist painstakingly recreates building facades from his neighborhood at a 1:12 scale...

Landende Zwaan Landing Swan Polyester Sculpture Evert den Hartog (born in Groot-Ammers, The Netherlands in 1949) followed his education to be a sculptor at the Rotterdam Academy o...

Created after Peter Alexander's return to sculpture in the 2000s, this intimate urethane pyramid distills the artist's lifelong investigation of geometry, light, and perception into ...

"Weekday, Faraway" is an original Metal, mirrored glass, crushed quartz, polyesterfibre, plastic, wire, and enamel paint artwork by Kendal Murray measuri...

Created in 1971, this cast polyester resin cube exemplifies Peter Alexander's pioneering use of industrial materials to investigate light, color, and perception. A leading figure of ...

Laure Krug. Contemporary French artist Holder of a license in plastic arts, she naturally turns to sculpture. Materials: She begins by working the soil and masters the different co...

Rearing Horse is a polyester sculpture by contemporary artist Eric Valat, dimensions are 100 × 80 × 30 cm (39.4 × 31.5 × 11.8 in). The sculpture is available in white, black, red, bl...

"Untied, Joyride" is an original metal, fabric, pebbles, wire, polyester fibre, plastic, paper, and enamel paint artwork by Kendal Murray measuring appro...

This piece titled "Billy Ray's Tavern" is original artwork made from paper, plaster, acrylic, enamel, polyester, basswood, chain, wire, inkjet prints, and pastels by Drew Leshko. This piece measures 28"h x 19"w x 7"d. Drew Leshko is a Philadelphia, Pennsylvania-based artist. By carving, cutting, and layering varieties of paper and wood, Leshko creates documentary studies of architecture from his neighborhood in an attempt to create a three-dimensional archive of buildings that are in transitional periods. The work examines gentrification and history, how historical relevance is determined, and most importantly, what is worth preserving. Working from observation and photographs, the artist painstakingly recreates building facades from his neighborhood at a 1:12 scale...

Created in 2013, this wall-mounted urethane relief reflects Peter Alexander's continued exploration of light as both material and subject. Suspended approximately two inches from the...

"Mannequine I" Sculpture 42" x 11" x 5" inch by Sarkis Tossonian Sarkis Tossoonian was born in Alexandria in 1953. He graduated from the Faculty of Fine Arts/Sculpture in 1979. He s...

Sylwia Jakubowska-Szycik is professor at the Academy of Fine Arts at the Faculty of Sculpture and Intermedia in Gdańsk, she conducts classes in the f...

In recent years, Daniel G. Hill has been fixated on the work’s method of construction and its physical presence. During the winter of 2014, he began a new line of inquiry, translati...

LABUBU, Kasing Lung, LABUBU, Big into Energy "Have A Seat" Blind Box Unopened Mint Condition Japan, 2025 ABS/PVC/Polyester 6 7/10 × 3 7/10 × 2 7/10 in 17 × 9.4 × 6.9 cm From an open...

This expressionist ceramic bust by Óscar Aldonza Torres portrays an elderly man through richly modelled surfaces, oil-painted color and copper lea...

Memory is at its most magical when it conjures up not the event, but its surrounding perceptual and emotional space. Flashes of reflected light, movement seen out of the corner of eye, bits of sound or feeling – these are what ignite memory, giving it form and bringing it to life. Light both beams into and envelops you. Carol Salmanson started working with it in 2003 after painting for many years because of these singular spatial qualities. They enable herto build whole worlds with color and shape, ones that resonate with memory and experience. Painters have often talked about depicting light. Today’s technology allows me to use light as medium as well as subject. Double Diamond is made with layers of light that beam onto reflective material; its two different configurations of diamonds are mounted on a strip that also layers light. The location in the beams creates a glowing frieze that radiates outwards, giving the viewer a first a sense of surprise, and then wonder. Carol Salmanson is an artist working with light and reflective materials to create installations, sculptures, and wall pieces. She received a B.S. in Biological Psychology from Carnegie-Mellon University and an M.B.A. from the University of Chicago. She attended the Arts Students League, the School of Visual Arts as a Public Art Resident, and the National Academy of Fine Arts as an Abbey Mural Workshop Fellow. Public art projects include Water Bubbles, an installation in twenty windows of the abandoned landmark Constructivist White Tower in Yekaterinburg, Russia. Other window installations include the venues Station Independent Projects, Time Equities’ Art-in-Buildings program, OK Harris Works of Art, 254 Park Avenue South, and Mixed Greens Gallery, all in New York. Her outdoor sculptures include Tri-Quadular Cone in Summit, NJ, and Lot’s Ex-Wife in Brooklyn. She will have an installation, Crown Colony, in the window at 266 W. 37th St, in September of this year. Solo and two-person exhibition venues include SL Gallery (NY), Slag Contemporary (Brooklyn), Station Independent Projects (NY), Brian Morris...

Memory is at its most magical when it conjures up not the event, but its surrounding perceptual and emotional space. Flashes of reflected light, movement seen out of the corner of eye, bits of sound or feeling – these are what ignite memory, giving it form and bringing it to life. Light both beams into and envelops you. Carol Salmanson started working with it in 2003 after painting for many years because of these singular spatial qualities. They enable herto build whole worlds with color and shape, ones that resonate with memory and experience. Painters have often talked about depicting light. Today’s technology allows me to use light as medium as well as subject. Double Diamond is made with layers of light that beam onto reflective material; its two different configurations of diamonds are mounted on a strip that also layers light. The location in the beams creates a glowing frieze that radiates outwards, giving the viewer a first a sense of surprise, and then wonder. Carol Salmanson is an artist working with light and reflective materials to create installations, sculptures, and wall pieces. She received a B.S. in Biological Psychology from Carnegie-Mellon University and an M.B.A. from the University of Chicago. She attended the Arts Students League, the School of Visual Arts as a Public Art Resident, and the National Academy of Fine Arts as an Abbey Mural Workshop Fellow. Public art projects include Water Bubbles, an installation in twenty windows of the abandoned landmark Constructivist White Tower in Yekaterinburg, Russia. Other window installations include the venues Station Independent Projects, Time Equities’ Art-in-Buildings program, OK Harris Works of Art, 254 Park Avenue South, and Mixed Greens Gallery, all in New York. Her outdoor sculptures include Tri-Quadular Cone in Summit, NJ, and Lot’s Ex-Wife in Brooklyn. She will have an installation, Crown Colony, in the window at 266 W. 37th St, in September of this year. Solo and two-person exhibition venues include SL Gallery (NY), Slag Contemporary (Brooklyn), Station Independent Projects (NY), Brian Morris...

Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base "Don Frost, sculptor, creator of completely unique,...

Created in 1966, this cast polyester resin sculpture dates to the earliest years of Peter Alexander's pioneering experimentation with industrial resin, a material that would become s...

"Lara" Figurative Sculpture 16" x 13" x 9" inch by Sarkis Tossonian Sarkis Tossoonian was born in Alexandria in 1953. He graduated from the Faculty of Fine Arts/Sculpture in 1979. H...

Seeker Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Graphite filled acrylic laquor on filled polyester resin base 35 x 10 x 12  "I am an artist, a sculptor n...

Artist: Chuck Krause (1949) Title: Shadow Dancing
 Year: 2024 Size: 23 x 23 x 2 inches Medium: Motorized curved arms on white archival museum board Condition: Excellent condition Not...

Dionysian Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base 44 x 8 x 6 in "I am an artist, a sculptor...

Niad Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base 22 x 36 x 22 in "I am an artist, a sculptor no...

John Garrett was raised in southern New Mexico by parents who were both educators. They instilled in him an appreciation for the handmade with their collections of Native American a...

Archer Fiberglass / Carbon Fibre impregnated with catalysed polyester resin Powder filled acrylic lacquer on filled polyester resin base 58" x 10" x 14" "I am an artist, a sculptor ...

Ceramic sculpture "White Way". With this work I am talking about the state of a woman when she is connected to the natural source of her power, when she is light at heart. In this case, a woman's actions are filled with favorable energy. I have depicted this energy in the form of a white band that she weaves with her hands.

 The work is made of white white clay with fine chamotte. The figure has a matte rough surface of cream color with white engobe flecks. The white band is tied with polyester thread. It is attached to the figure with a thin wire. - Sve Gri...

This 10.5" x 6" x 8" 3-D printed bust of Jesse Jackson was created by California based artist, Daniel Edwards. It is a unique 3D printed sculpture from the Civil Rights Portrait Seri...

Pathways of Desire (2009) - block printed, manipulated, stitched, heat-set polyester, cotton thread. This contemporary abstract tapestry is by UK-based contemporary textile artist, Caroline Bartlett...

In recent years, Daniel G. Hill has been fixated on the work’s method of construction and its physical presence. During the winter of 2014, he began a new line of inquiry, translati...

Reinforced polymer (FV) and acrylic polyurethane. Edition 2 of 9