Steel Sculptures

Carbon Void Jade is a sculpture by contemporary artist Tom Price. This sculpture is made of coal, polyurethane resin, steel, dimensions are 46 × 155 × 71 cm (18.1 × 61 × 28 in). Thi...

Harry Bertoia, After, American (1915 - 1978) - Spray Sculpture, Year: circa 1980, Medium: Wire Kinetic Sculpture, Size: 16 x 12 x 12 in. (40.64 x 30.48 x 30.48 cm), Description: ...

Resin, tar, steel, acrylic, LED. 45 cm × 220 cm × 35 cm. Available on commission. Production delay: 8 months. Synthesis Bench is one of Tom Price's 'hybrid' artworks sitting halfway ...

Viga 4 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, wood, dimensions are 242 × 45 × 45 cm (95.3 × 17.7 × 17.7 in). The indicated dime...

Synthesis 1 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, acrylic and LED, dimensions are 205 × 50 × 50 cm (80.7 × 19.7 × 19.7 in). T...

This contemporary outdoor sculpture of a pine cone made from steel is by Floyd Elzinga. Hand forged from corten steel, Floyd Elzinga’s impressive outdoor sculpture of a pine cone is...

Viga 3 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, wood, dimensions are 171 × 45 × 45 cm (67.3 × 17.7 × 17.7 in). The indicated dime...

Coal, resin, tar, steel, acrylic, LED. 45 cm × 220 cm × 35 cm. Counterpart II is one of Tom Price's 'hybrid' artworks sitting halfway between art and design: the piece can be seen ex...

This figurative steel indoor sculpture challenges cultural norms about women. The finely detailed, provocative sculptures of Derya Ozparlak have secured her a unique place in the wo...

This impressive circular architectural sculpture was created by Jeffrey Gillmor. An experienced metal artisan, this outdoor piece—a circle cut from a square is forged from etched steel and has a rust-coloured patina. Gillmor favours minimalist forms and finds inspiration for his work in nature’s colours, textures and shapes. World We See allows the viewer to not only see through the expansive ‘portal’ but walk through it as well. This is the largest of three similar sculptures in a series, each cut from the same four face plates of steel, producing another sculpture from the inside of the last. This piece is in an edition of 5 and is available on commission. Please allow 6-8 weeks for delivery upon completion. “The World we see and live in is much more complex than I feel it has to be, so we need to keep (everything) in perspective, keep basic positive values ... as we pass through the circle of life.” Jeff Gillmor...

Hand forged from weathering steel Floyd Elzinga’s impressive outdoor sculpture of a pine cone is designed to house logs for a fire. The end of the cone opens to allow for logs to be ...

This lyrical and elegant contemporary sculpture is by David Chamberlain whose work is collected and admired around the world. Hand forged in patinated bronze and steel, the flowing c...

Synthesis 6 (small horizontal) is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, acrylic and LED, dimensions are 45 × 51 × 35 cm (17.7 × 2...

"Beaded Flower 10" is an original piece by Jeff Rubio made from terra cotta and stoneware beads, glaze, rope, metal hardware, steel paperclip. This pieces measures 30"h x 7.5"w x 2.5...

The elegant abstract sculptures of Stefan Duerst are characterized by clean, flowing lines and minimal form hand forged from steel. This piece is a single ‘ribbon’—a contemporary tow...

This contemporary outdoor sculpture of a pine cone is made from metal by Floyd Elzinga. The Canadian artist’s uniquely beautiful metalwork is inspired by nature. The pine cone has b...

The Geologic Screens Series The Geologic Screens are studies from the Colorado Cascade Mural. David pieced together bits of the original rock and ice castings to try various combinat...

Positive street signs and mindful messages characterize the work of multidisciplinary artist Scott Froschauer. Froschauer utilizes a practice called "cultural jamming," which appropr...

Inspired by dance and weightlessness, Granville Beals' industrial metal sculptures are primarily about relationships. Concerned with form and abstracti...

Quebec artist Claude Millette is known for his dynamic geometric-shaped outdoor sculptures. With Expansion, two elongated rectangular frames of corten steel sit somewhat askew one at...

Bronze & Steel Table

Inspired by dance and weightlessness, Granville Beals' modern industrial metal sculptures are primarily about relationships. Concerned with form and abstraction, he does not merely m...

Zō is a bronze sculpture by contemporary Argentinian artist Marcelo Martin Burgos, portraying an abstracted elephant, a reference subtly embedded in its title, which translates to el...

This contemporary, figurative, Corten steel outdoor sculpture is by Mississippi sculptor Jason Kimes. Forged from corten steel, the piece has naturally taken on a weathered, rusted p...

Synthesis 2 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, steel, acrylic and LED, dimensions are 125 × 50 × 50 cm (49.2 × 19.7 × 19.7 in). T...

Susan Rankin has captured the luminous colour of water—from pale blue and turquoise to ocean blue in her latest series of garden columns. These hand-blown glass outdoor sculptures ar...

Give your garden a touch of industrial elegance with our steel wall in a 3-part design with a rusty surface! Each part of the wall is made of high-quality steel and has been careful...

This contemporary outdoor sculpture was forged from steel by a Quebec artist. An elegantly curved column of corten steel appears to almost float in mid-air in this arresting outdoo...

Nayla Kai Saroufim is a Lebanese artist based in Los Angeles and Beirut. She earned a degree in Illustration and Art Direction from the Académie Libanaise des Beaux-Arts. She had wor...

Kristina Fjellman, a Minnesota-based visual artist and performer, seamlessly blends sculpture and performance art in her captivating work. She has garnered recognition with exhibitio...

Synthesis LS1 is a unique sculpture by English artist Tom Price. Dimensions are 208 × 45 × 45 cm (81.8 × 17.7 × 17.7 in). The dimensions include the base of the sculpture, dimensions...

Counterpart is a sculpture by British contemporary artist Tom Price, it is composed by two elements each measuring 45 cm H x 220 cm L x 35 cm D ( 17.7 × 86.6 × 13,78 in). This artwo...

Kristina Fjellman, a Minnesota-based visual artist and performer, seamlessly blends sculpture and performance art in her captivating work. With exhib...

By Your Side is a wall sculpture paying tribute to eternal love of couples who support each other, during good times and bad times, importance of being by your side. Edition Size: 2...

Xavier Corberó Olivella (1935 – 2017) Estructuras Continual Bronze sculpture. Comprised of four elements, independant, 1 spheric. 5 X 8 X 7 inches approximately. The pieces are kinetic and moveable so dimensions are a bit variable. This is accompanied by a hand signed and dated photo certificate of the piece. A silver gelatin photograph. The photo is badly torn. Xavier Corberó i Olivella (1935 – 2017) was a prominent Catalan artist, best known for monumental public sculpture and his palatial house complex in Esplugues de Llobregat near Barcelona. He has been described as "widely considered the most important Catalan artist since Antonio Gaudí," as "one of Spain’s most celebrated sculptors" and as having "perhaps influenced Barcelona more than any artist since Gaudí." Corberó's grandfather Pere Corberó i Casals (1875-1959) was an entrepreneur and artist whose works included the bronze memorial on the birthplace of Enrique Granados, also in Lleida. He was a cofounder of Barcelona's association for the promotion of decorative arts, a precursor to the Design Museum, now known as the Foment de les Arts i el Disseny. The Corberó foundry produced sculptures by prominent Catalan sculptors of the time such as Pablo Gargallo, Josep Viladomat and Frederic Marès. It was also an industrial and commercial business that sold bronze doors, chandeliers, fountains, and other decorative items, with a showroom in downtown Barcelona at Rambla de Catalunya 105, in a building designed by Arnau Calvet i Peyronill, and a workshop nearby at Carrer Aribau 103. Pere's son and Corberó's father, Xavier Corberó i Trepat (1901-1981), also worked in the family bronze...

This figurative indoor sculpture of a male is hand forged in steel. The uniquely beautiful sculptural work of multidisciplinary artist Derya Ozparlak has been exhibited in collectio...

This outdoor lamp "Ikosaeder" is for the garden or entrance area. This lamp impresses her unique shadow projection. The icosahedron is supplied in rust optics. The built-in lamp par...

German Steel Fireplace "Blossom I" d = 55 cm with tall square base 80 cm. This fire blossom is the eye-catcher in your garden. Due to the good air supply, you can setup very quickly...

Inspired by dance and weightlessness, Granville Beals' industrial metal sculptures are primarily about relationships. His original artworks capture the essence of Abstract Expression...

This contemporary, geometric abstract, Corten steel outdoor sculpture is by Quebec artist Claude Millette. Millette has been creating compelling sculptures for more than four decades...

This contemporary abstract outdoor sculpture is forged from Corten steel. Claude Millette often draws inspiration for his modern sculptures from the graceful movement of dancers. Th...

With its rustic aesthetic, this privacy screen will not only protect your privacy, but also give your outdoor area a special charm. The rusty surface gives each element an individual...

Inspired by dance and weightlessness, Granville Beals' industrial metal sculptures are primarily about relationships. Concerned with form and abstraction, he does not merely manipula...

Philippe Pallafray’s latest sculpture—an eye-popping candy-coloured large steel cube—each stripe painted in bright red, orange and pink balances on one corner. The Quebec artist designs pop art pieces that reflect the duality of nature and the industrial world. Pallafray typically uses steel and stainless steel that he cuts, shapes, folds and welds. “My geometrically shaped sculptures...

This piece, titled "Large Sitting House" is an original free-standing sculpture by Seth Clark as part of his newest solo exhibition, "Passing Through". Clark's deteriorating structu...

Carbon M is a unique sculpture by contemporary artist Tom Price. This sculpture is made of coal, Jesmonite, wood, steel, dimensions are 45 cm × 220 cm × 35 cm (17.7 × 86.6 × 13.8 in)...

Counterpart (diptych) is a sculpture by contemporary artist Tom Price. This sculpture is made of coal, resin, tar, steel, acrylic, LED, dimensions are 45 × 220 × 35 cm (17.7 × 86.6 ×...

Artist: Mel Ramos, American (1935 - ) Title: Mixed Nuts Year: 2008 Medium: Enamel on Steel, signed and numbered in marker Edition: 125, 25 AP Size: 28 in. x 20 in. x 1.5 in. (71.12 c...

This figurative steel indoor sculpture is made by Derya Ozparlak. Derya Ozparlak has been a full-time artist since 2006 and continues to create distinctively unique sculptures. Her ...

Extraordinary wire sculpture "Horse" on a quadratic oxidised oak pedestal for your garden. The mane is made of stainless steel. We produce this object in our own locksmith's shop, ...

Counterpart (triptych) is a sculpture by contemporary artist Tom Price. This sculpture is made of coal, resin, tar, steel, acrylic, LED, dimensions are 45 × 220 × 35 cm (17.7 × 86.6 ...

Sentinel (Rocker) NY State slate/pigmented and sealed steel 39" (height) x 17" (width) x 6" (depth) Stone and metal, usually granite or slate, and found object steel are central in ...

This beautiful large corroded steel sculpture can be used for indoor or outdoors. It makes for an elegant statement in any garden, lobby or private home. Please specify if you want ...

Edition: limited edition 11/24 Information: Laurent combines a robust background in mechanical engineering with a profound passion for cars and arts. From a young age, Laurent spen...

A large contemporary black powder coated steel sculpture. Beautiful on the floor or a pedestal. A contemporary statement piece full of elegance and movement. _______________________...

"Lucy" by Carole Eisner Abstract, Outdoor Sculpture in welded steel Carole Eisner has worked with scrap and recycled metal for 40 years creating elegant, abstract forms welded in st...

Positive street signs and mindful messages characterize the work of multidisciplinary artist Scott Froschauer. Froschauer utilizes a practice called "cultural jamming," which appropr...

Birdhouse - city gate - on oak stele oxidized 20x20x100 cm Delight your garden birds with an aesthetically pleasing feeding tower. Designed in detail, with different sized windows,...

Synthesis A2 is a sculpture by contemporary artist Tom Price. This sculpture is made of resin, tar, patinated mild steel, stainless steel and LED, dimensions are 42 × 109 × 21 cm (16...

Welded nut sculpture. This stunning sculpture is created entirely from steel nuts and chain links. Every sculpture is meticulously hand crafted ensuring that no two pieces are ever...