Rubber Dining Room Chairs

Iconic side chairs designed by Charles and Ray Eames for Herman Miller and Vitra. Molded fiberglass shells in the colours: Seal Brown, Elephant Hide Grey, Parchment and Ochre Light. ...

One of 22 stackable dining room chairs by Charles & Ray Eames for Herman Miller, manufactured in midcentury, 1974. The chairs are labeled ...

Pair of Postmodern 'Tokyo' dining chairs by Rodney Kinsman for Bieffeplast, 1980's. Black powder coated tubular metal frames with a contrasting natural wood seat and finished with a ...

Guido Faleschini for i4 Mariani Tucroma Dining Chairs, Set of Six, Italy, 1971 Set of six Tucroma dining chairs in stamped orange leather with chrome tubular steel frames. Designed b...

Eames Molded Plywood Dining Chair Wood Base (DCW) in Red stained Ash The Eames Molded Plywood Dining Chair (1946) began as an experiment in Charles and Ray Eameses’ apartment and be...

Classic set of four Richard McCarthy wrought iron and oak dining armchairs. Featuring sturdy and balanced brown enameled solid wrought Iron reinforced framework, ergonomic curved oak...

One of 18 stackable dining room chairs by Charles & Ray Eames for Herman Miller, manufactured in midcentury, circa 1970 (late 1960s or ear...

Set of three P40 post modern dining arm chairs with black rubber seats and back on a black lacquered steel frame designed by Giancarlo Vegni & Gianfranco Gualtierotti for Fasem.

Iconic side chairs designed by Charles and Ray Eames for Herman Miller and Vitra. Molded fiberglass shells in the colours: Parchment, Ochre Light, Grey Yellow, Olive Green Dark, Sea ...

Rare Beautiful Arne Jacobsen Early Series 7 rosewood chair model No. 3107 by Probjeto produced in 1960’s. Made of moulded rosewood plywood with a wonderful strong rosewood grained v...

Set of Six Warren McArthur Armchairs for McArthur Corporation, 1933 Aluminum frames with woven linoleum upholstery and rubber elements. Set includes four examples of model 1047-A and...

Anna Anselmi for Bieffeplast with white enameled metal tubular frames with Black rubber backrest. Foam cushions. Labeled Bieffeplast, Padova, Italy label on the underside. (2) Avail...

Set of four chrome plated steel tripod dining chairs with aluminum arms and hardened plastic/rubber seats designed by Josep Llusca for Andey World, Spain. Maintains Made in Spain la...

A curated group of Eight dining chairs manufactured by Herman Miller and Designed in 1946 by Mid Century design duo Charles and Ray Eames from moulded plywood, chrome plated steel, p...

Large set of twenty model 3107 “Butterfly” dining chairs designed by Arne Jacobsen and produced by Fritz Hansen in Denmark, 1967. An enduring ic...

Rare and fully original two seater by Dominique Prevot, France 1970s. Bares marks and scratches which gives the piece character and shows that it has been in use. No structural is...

VINTAGE KINETICS PAOLO FAVARETTO TUBULAR CHROME CANTILEVER ARM CHAIRS! Very durable, heavy, solid and very comfortable! These clean easy and super strong! Chrome all in good conditi...

Amazing restored 'Campanula' Carver Chair with beautiful tapered form brass legs by Italian architect Carlo Pagani (architectural partner of both Gio Ponti and Lina Bo Bardi) for Arflex, Italy, 1952. The Carver chair is a rare variant of the campanula model with armrests which traditionally were placed at the head and foot of a large dining table, the original 'campanula' carver chairs are almost never found today so this is an extremely rare opportunity to obtain one This chair is an early examples identified by its artisan crafted solid wood frames and the 'Arflex' manufacturer's label which we managed to save from the original upholstery and have put back onto the new fabric Restoration details: This chair has had its upholstery completely restored in our upholstery shop , stripping it right back to its bare wood frame and then applying new high quality rubber seat and backrest support webbing by the original Italian manufacturer 'Pirelli', then new Pantera foam has been applied throughout replacing the old, dry and crumbling original foam and finally the chairs have been finished in a new elegant bright yellow top quality Mohair velvet fabric. The beautiful elegant tapered form brass legs have been sympathetically and lightly hand polished and may still exhibit some small signs of user wear commensurate with originality age and use. We did not want to machine polish the legs as it can take away at lot of the original vintage appeal. Carlo Pagani worked in the offices of Gio Ponti and collaborated and partnered Gio Ponti on several important projects which were documented in the Italian design journals of the period such as the August 1940 issue of Domus. In 1940, see scan attached in the photo section, Carlo Pagani started up his own architectural practice "Studio Bo...

Introducing the 'Décade' chair by Design Frères, the perfect blend of French 60's style and contemporary comfort. Crafted with meticulous attention to detail, this chair features a h...

Mid Century Modern vintage authentic three dining chairs or chairs with armrests from rattan and metal by Gian Franco Legler 1950s Switzerland. A fabulous and rare set of three chairs with armrests with a very comfortable seat shell from fine weaved rattan and black lacquered feet with rubbers. This design icon by Gian Franco Legler was designed in 1951 for an Italian restaurant...

Rare Shiro Kuramata design chairs model R401 Produced by Pastoe 1986 Black metal square frame with mesh seating. Rubber details on the armrest There are 6 chairs available. The pri...

Fabulous set of six bold black armchairs by Metro for Steelcase designed by Brian Kane. These sleek vintage chairs are made of black steel encased in EPDM rubber tubing with comforta...

Organic vintage and authentic eight dining chairs or chairs from rattan and metal by Gian Franco Legler 1950s. A fabulous rare and authentic eight ( 8 ) dining chairs or easy chairs...

A set of four 'T-chair' dining chairs, model 3103, designed by the iconic Arne Jacobsen (1902-1971) and manufactured by Fritz Hansen in the 1960s. These chairs are an early model, di...

Scandinavian Modern black vintage stacking chairs dining chairs up to 10 pieces of the popular model no.3103 designed by Arne Jacobsen, 1952 a...

Originally conceived in the Tom Dixon studio as an experimental café-style chair, the “Rubber Band” was first assembled from rubber bands and paper clips. In its final form, oversized rubber bands are stretched across a simple galvanized steel frame to create a seat that is both bouncy and supportive. The design is a playful yet radical exploration of materiality and form, reflecting Dixon’s view of furniture as functional sculpture. Extremely rare on the market, these chairs are suitable for both indoor and outdoor use, and represent a striking moment in contemporary British design. About the designer Tom Dixon (b. 1959, Tunisia) is a British designer renowned for his industrial, material-driven approach to contemporary design. Rising to prominence in the 1980s with his welded salvage furniture...

This vibrant set of six dining chairs dates from the 1980s and reflects the bold spirit of the Memphis design era. Presumably made in France, the chairs feature a strong black metal ...

Anna Anselmi for Bieffeplast, set of ten 'Alpha' dining chairs, rubber, lacquered metal, Italy, 1985 These armchairs are characterized by an unusual aesthetics that are created during the postmodern era in Italy. The backrest smoothly runs over into the armrests through a curvaceous movement. The red tube...

Nice set of 4 Italian dining chairs produced by Pizzetti, Rome in the 1950s During restoration the original manufacturers labels showed up under the old upholstery and were saved to be added on again when finished The chairs have been restored with respect with new Pirelli rubber strapping and latex interior foam as they were done original Zumirez moonbeam wool bouclé fabric by Zinc from their Malibu collection The black enameled solid steel frames have been polished and have paint loss consistent with age and use but proving the age of these chairs and adding character Upon request the frames can be repainted or powder coated A nice set of Italian chairs...

This is an Eames DCMU Chair, designed by Charles and Ray Eames for Herman Miller. This model was designed in 1970. The acronym DCMU stands for Dining Height...

Iconic Landi aluminium stacking chair, originally designed by Hans Coray for the Swiss National Exhibition in Zurich (1938) and executed in the 1950s by P. & W. Blattmann Metallwaren...

A rare and exceptional set of six early transitional DCM (Dining Chair Metal) chairs designed by Charles & Ray Eames for Herman Miller / Evans Products. These examples, crafted in as...

"Rubber Chairs" for Metropolitan Furniture for Steelcase by Brian Kane, 1987. Chairs are black steel with rubber coating and leather seats. Measure 30” tall 22” wide 21” deep seat he...

Stylish pair of post modern design chairs, made in Italy, retailed by Conrans Habitat NYC in the 1990's. Very fine, original clean and ready to use condition. Textured rubber upholst...

Original Arne Jacobsen for Fritz Hansen Model 3103 Plywood "Hammer Chair" 1965 These chairs were originally designed 1955, these were manufactured in May 1965 Silver Fritz Hansen M...

This Italian design Bar Stools are designed by Tito Agnoli and are manufactured by Bonacina. Modell Miss B Classic designed in 1997. It had a tube stainless s...

A set of six stackable dining room chairs by Charles & Ray Eames for Herman Miller, manufactured in midcentury, 1974. The chairs are labe...

This is a pair of Eames DCMU Chairs, designed by Charles and Ray Eames for Herman Miller in 1970. These particular examples were produced in the United States and date back to the 19...

Set of 4 stackable armchairs in chromed tubular metal, seat and back in black leather and spring structure for a comfortable seat. Model "2062 Castiglia" designed by A. Castiglioni a...

Set of 4 dining or office chairs made from black mat metal structure and brown skai seat and back. Rubber feet and brass studded back/armrest. The metal structures have been repainte...

Set of 4 handkerchief armchairs by Massimo Vignelli for Knoll. In 1968 Vignelli was contracted by Knoll to re-envision the corporate identity ...

Extremely rare combination of wenge wood veneer and dark eggplant frame. No veneer chips. Special custom order. Chair is in very good condition. Collector's item. Maintains black med...

In this listing you will find a set of Postmodern Dining Chairs "Miss B" designed by Tito Agnoli for Bonacina. They feature steel tubular construction and spaghetti-like rubber seats...

- 1979, Italy - publicated in books and catalogues - perfect intact original condition !! - marked by manufacturer jr

Herman Miller Eames DSR fiberglass chair on Eiffel base in elephant hide grey. Chair dates to 1961. Base has excellent patina and new glides. No s...

Introducing the 'Décade' chair by Design Frères, the perfect blend of French 60's style and contemporary comfort. Crafted with meticulous attention to detail, this chair features a h...

A set of four café chairs designed by Philippe Starck in 1983 for Costa café. This were made by Cerruti Baleri, Italy in 1984. The seat is made out o...

Introducing the 'Décade' chair by Design Frères, the perfect blend of French 60's style and contemporary comfort. Crafted with meticulous attention to detail, this chair features a h...

Set of 4 handkerchief armchairs by Massimo Vignelli for Knoll. In 1968 Vignelli was contracted by Knoll to re-envision the corporate identity ...

Set of 4 handkerchief armchairs by Massimo Vignelli for Knoll. In 1968 Vignelli was contracted by Knoll to re-envision the corporate identity ...

This is an early DCM Chair, originally designed by Charles and Ray Eames in 1946. The piece was produced by Herman Miller and retains its tag under the seat. This example was produce...

This is a DCMU Dining Chair, originally designed by Charles and Ray Eames for Herman Miller in 1970. This particular example was produced in the United States and dates back to the 1...

The earliest fiberglass Eames chairs were produced by Zenith Plastics and came in a limited palate of five colors including lemon yellow. The Zenith produced shells are distinctive f...

Anna Anselmi for Bieffeplast, pair of 'Alpha' dining chairs, rubber, lacquered metal, Italy, 1985 These armchairs are characterized by an unusual aesthetics that are created during the postmodern era in Italy. The backrest smoothly runs over into the armrests through a curvaceous movement. The red tube...

Anna Anselmi for Bieffeplast, set of six 'Alpha' dining chairs, rubber, lacquered metal, Italy, 1985 These armchairs are characterized by an unusual aesthetics that are created dur...

Set of six dining chairs in black leather by Giancarlo Vegni and Gianfranco Gualtierotti for Fasem, Italy, circa 1980. D...

These Italian design chairs are designed by Tito Agnoli and are manufactured by Bonacina A very comfortable contemporary dining chair. Designed in 1997. It had a tube steel frame a...

Italian modern Chairs in black rubber and metal by Airon, 1980s Set of 4 chairs with round seat in black rubber. The backrest is in tubular metal, covered in black rubber. At the bas...

Set of four Lambda chairs by Richard Sapper and Marco Zanuso for Gavina, Italy 1959. Industrial and revolutionary design made from stamped and enameled metal and rubber feet. The tec...

Sculpted contemporary black chair - Ztista Chair by Faina Design: Victoriya Yakusha Material: steel, flax rubber, biopolymer, cellulose Dime...