Harry Bertoia Abstract Sculptures

Harry Bertoia, Monumental Sonambient Sculpture, USA, circa 1970's. Inconel on brass plate, comprised of 49 rods in a 7 x 7 layout with cattails, unmarked. Measures H: 81, W: 16, D: 1...

A unique bronze sculpture displayed on a granite stone base circa 1973 by Harry Bertoia (1915-1978), the celebrated Italian-born American artist, sculptor, and designer. The welded a...

A unique bronze sculpture circa 1960s by Harry Bertoia (1915-1978), the celebrated Italian-born American artist, sculptor, and designer. The welded and patinated bronze sculpture is ...

An extremely rare Harry Bertoia sterling silver brooch "Ginko Leaves." The brooch has been added to the Harry Bertoia Catalogue Raisonné and assigned the following catalogue raisonné number: D.JE.77. This piece comes from a private collection. Provenance will accompany the piece. The Brooch measures: 2.94 " long x 1.5 " wide x .30 " deep. Although associated with Mid-Century Modern furniture, Harry Bertoia was originally a jewelry designer who used both sterling silver, precious stones and gem stones. The brooch and closure are all handcrafted and the clasp is his unique design. The following is from Beverly H. Twitchell, PhD, author of Bertoia: The Metalworker, London: Phaidon, 2019. She provides a very informative critique of Bertoia and his jewelry. Wearable Art an Important Design for a Necklace “Before Harry Bertoia enrolled at the Cranbrook Academy of Art in 1937 he had already mastered traditional jewelers’ techniques, but his engagement with Modernism led him to invent and use more direct methods. Instead of precious metals and gems, Bertoia made jewelry that appealed through its design, craftsmanship and the nature of its materials. That approach would make Bertoia a direct predecessor of the American Studio Crafts movement. So complex and cumulative are human perception and memory that we often do not know from where our own ideas come and without firm evidence, it is impossible to think we can establish the origins of an artist’s ideas. While his jewelry is entirely modern, chokers with multiple small pendants had come from ancient Mediterranean cultures: Mesopotamia, Egypt, Greece and Italy, even from Europe and America at the turn of the last century. Did Bertoia see works in books, journals or at the Detroit Institute of Arts that resonated with him or did he invent this on his own, as he would so many other forms? Bertoia found inspiration in nature from an early age on a small farm in Italy and later in Cranbrook’s woods, on the beaches of southern California and in the fields near his home in eastern Pennsylvania where he lived after 1950. The fluidity and motion of the his jewelry characterize much of his art. In that spirit, too, he made jewelry that suited human anatomy and was animated by its wearer’s movement. Bertoia had the instincts of an engineer, as the intricacy of the present lot’s clasp and overall construction of the jewelry demonstrates. Large jewelry by Bertoia is very rare. A delight to the eye, and like all of Bertoia’s work it is timeless.” Harry Bertoia (1915 – 1978) was an Italian-born American artist, jewelry creator and modern furniture designer. He was born in San Lorenzo d-Arzene, Pordenone, Italy. At age 15 he moved to Detroit, Michigan to live with his older brother, Oreste. He quickly learned English and the bus schedule and enrolled in Cass Tech High School in Detroit (1930-1936) where he studied art and design and learned the skill of handmade jewelry making. At that time, there were three jewelry and metals teachers Louise...

WEARABLE ART AN IMPORTANT DESIGN FOR A NECKLACE The necklace is unique and extraordinary. Because of its specific design elements it lays beautifully and comfortably on any body structure. This piece comes from a private collection. Provenance will accompany the piece. It has been authenticated by Val Bertoia and is listed in the Harry Bertoia Foundation Catalogue Raisonne # D.JE.49 having been authenticated as a Harry Bertoia piece. REPLY FROM CHRISTIE'S: "Dear Charles, thank you for contacting Christie's. I am absolutely stunned to see the necklace by Harry Bertoia you have submitted for feedback from us, and I would love to speak with you about the work at your earliest convenience. I am a great fan and a known expert in the work of Harry Bertoia, and I have handled over 600 of his sculptures, jewelry and art over the last 22 years. I have never seen a better piece of his jewelry, and it stands as one of the greatest objects in any category that he made. Michael Jefferson Senior Vice President International Senior Specialist Design" The following is from Beverly H. Twitchell, PhD, author of Bertoia: The Metalworker, London: Phaidon, 2019. She provides a very informative critique of Bertoia and his jewelry. Wearable Art an Important Design for a Necklace “Before Harry Bertoia enrolled at the Cranbrook Academy of Art in 1937 he had already mastered traditional jewelers’ techniques, but his engagement with Modernism led him to invent and use more direct methods. Instead of precious metals and gems, Bertoia made jewelry that appealed through its design, craftsmanship and the nature of its materials. That approach would make Bertoia a direct predecessor of the American Studio Crafts movement. So complex and cumulative are human perception and memory that we often do not know from where our own ideas come and without firm evidence, it is impossible to think we can establish the origins of an artist’s ideas. While his jewelry is entirely modern, chokers with multiple small pendants had come from ancient Mediterranean cultures: Mesopotamia, Egypt, Greece and Italy, even from Europe and America at the turn of the last century. Did Bertoia see works in books, journals or at the Detroit Institute of Arts that resonated with him or did he invent this on his own, as he would so many other forms? Bertoia found inspiration in nature from an early age on a small farm in Italy and later in Cranbrook’s woods, on the beaches of southern California and in the fields near his home in eastern Pennsylvania where he lived after 1950. The fluidity and motion of the his jewelry characterize much of his art. In that spirit, too, he made jewelry that suited human anatomy and was animated by its wearer’s movement. Bertoia had the instincts of an engineer, as the intricacy of the present lot’s clasp and overall construction of the jewelry demonstrates. Large jewelry by Bertoia is very rare. A delight to the eye, and like all of Bertoia’s work it is timeless. Bertoia had the instincts of an engineer, as the intricacy of the present lot's clasp and the overall construction of this piece demonstrate. Closed, the necklace sits on a table in a surprisingly conical shape, but it is so flexible that it conforms to its wearer from her neck nearly to her shoulders. Each handmade section is riveted to its neighbors, allowing it to adjust to the body while the pendants curve in many directions: one fits the left clavicle so precisely that Bertoia likely tried it on Brigitta Valentiner, who became his wife in 1943. Other pendants face toward or away from each other, bending up or down. Each element has been hammered into multiple curves and worked in Bertoia’s hands. Large jewelry by Bertoia is very rare. A delight to the eye, this necklace no doubt caused a sensation in its day as it might at the 2022 Met Ball in ours, for like all of Harry Bertoia’s work, it is timeless.” Harry Bertoia (1915 – 1978) was an Italian-born American artist, jewelry creator and modern furniture designer. He was born in San Lorenzo d...

Extremely rare combination pendant attached to custom-made chain by Harry Bertoia in sterling silver, containing one Lapis Lazuli and one Coral. This piece comes from a private collection. Provenance will accompany the piece. The work has been added to the Harry Bertoia Catalogue Raisonné and assigned the following catalogue raisonné number: D.JE.78. Although associated with Mid-Century Modern furniture, Harry Bertoia was originally a jewelry designer who used both sterling silver, precious stones and gem stones. The pendant measures: 1.25" long x 1" wide. The necklace measures: 11" length with a measurement of 22" overall length. The chain and closure are all handcrafted and in his unique design. Lapis Lazuli measures 20mm round supported by one 6 mm red coral. Total weight is 33 grams. The following is from Beverly H. Twitchell, PhD, author of Bertoia: The Metalworker, London: Phaidon, 2019. She provides a very informative critique of Bertoia and his jewelry. Wearable Art an Important Design for a Necklace “Before Harry Bertoia enrolled at the Cranbrook Academy of Art in 1937 he had already mastered traditional jewelers’ techniques, but his engagement with Modernism led him to invent and use more direct methods. Instead of precious metals and gems, Bertoia made jewelry that appealed through its design, craftsmanship and the nature of its materials. That approach would make Bertoia a direct predecessor of the American Studio Crafts movement. So complex and cumulative are human perception and memory that we often do not know from where our own ideas come and without firm evidence, it is impossible to think we can establish the origins of an artist’s ideas. While his jewelry is entirely modern, chokers with multiple small pendants had come from ancient Mediterranean cultures: Mesopotamia, Egypt, Greece and Italy, even from Europe and America at the turn of the last century. Did Bertoia see works in books, journals or at the Detroit Institute of Arts that resonated with him or did he invent this on his own, as he would so many other forms? Bertoia found inspiration in nature from an early age on a small farm in Italy and later in Cranbrook’s woods, on the beaches of southern California and in the fields near his home in eastern Pennsylvania where he lived after 1950. The fluidity and motion of the his jewelry characterize much of his art. In that spirit, too, he made jewelry that suited human anatomy and was animated by its wearer’s movement. Bertoia had the instincts of an engineer, as the intricacy of the present lot’s clasp and overall construction of the jewelry demonstrates. Large jewelry by Bertoia is very rare. A delight to the eye, and like all of Bertoia’s work it is timeless.” Harry Bertoia (1915 – 1978) was an Italian-born American artist, jewelry creator and modern furniture designer. He was born in San Lorenzo d-Arzene, Pordenone, Italy. At age 15 he moved to Detroit, Michigan to live with his older brother, Oreste. He quickly learned English and the bus schedule and enrolled in Cass Tech High School in Detroit (1930-1936) where he studied art and design and learned the skill of handmade jewelry making. At that time, there were three jewelry and metals teachers Louise Green...

American Mid-century artist Harry Bertoia would spend his daylight hours working on the monumental public projects for which he is so well known. In the evenings though, after dinner...

American Mid-century artist Harry Bertoia would spend his daylight hours working on the monumental public projects for which he is so well known. In the evenings though, after dinner...

Bertoia's Dandelion form is widely regarded to be the apex of his career. An overwhelming physical presence is balanced by its truly delicate nature. A gilt bronze central sphere is ...

Abstract Brutalist Nails Sculpture by Harry Bertoia, circa 1950s.

An atypical form for Beartoia's (1915-1978) sonambients given it's split in the centre of the rods. A desirable size for display in the home and a typically wonderful sound quality.

A large organic bush form with beautiful patina. Masterful work by Harry Bertoia. Sold with a COA from the Bertoia foundation.

Provenance: Wright Modernist 20th Century, auction 12/7/2003, Bertoia worked with the Eames' in California in the late 1940s to develop their wire form chairs. His involvement led...

Wire sculpture on pedestal by Harry Bertoia (1915-1978), circa 1950's. Overall dimensions including pedstal: 79.5"H x 16.25"W x 16.5"D Wire sculpture dimensions: Approx. 38"H x 17"...

A figurative vertical form with two protrusions on top constructed of melt pressed bronze (heated numerous times, squeezed, and shaped. Includes provenance and hand-signed COA from t...

"Untitled" (Bush) Sculpture by Harry Bertoia, circa 1970's made of welded bronze. Harry Bertoia, was an Italian-born American artist, sound art sculptor, an...

Multi-plane sculpture by Harry Bertoia made of steel and molten brass. This was a working model for a large commission installation of ten sculptures ...

Design Harry bertoia for Knoll, Model Bird armchair with ottoman, 1980, retains original label. Harry Bertoia for Knoll. Vogel armchair and ottoman i...

Harry Bertoia created numerous bundled wire sculptures from the late 1950s until the mid-1970s. This example is a large and interesting table-top variation. Sculpture comes with au...

A fine example from this series of work. The surface of the brass-coated bronze plates show a stunning Patinated irregular surface in rouge reds, gold and Verdi gris green Possibl...

Rare patinated bronze bush form, circa 1970 Provenance: Mangel Gallery, Philadelphia, PA, 1970s; Descended in the family.

Midcentury Harry Bertoia Sonambient sculpture featuring seven black monel "cat-tail" tops silvered to beryllium. Copper rods silvered to brass base. In fin...

Stunning wire sculpture by Harry Bertoia (American, 1915-1978). Made of stainless steel in free standing form. Provenance: Purchased directly from the artist by the current owner in ...

"Six branches" sculpture, with stainless steel wires silvered together in two clusters per "branch" onto stems of stainless steel, by Harry Bertoia, American 1960s. This sculpture co...

Original "Sprawling Bronze" by Harry Bertoia (1915-1978). Rare molten bronze spill cast with three feet to make it free-standing. Green patina adds to the organic feel of the sculp...

A sonambient rods sculpture by Harry Bertoia (1915-1978). A desirable size for display in the home and a typically wonderful sound quality.

An unusual piece of Bertoia's jewelry with a figurative quality. This brooch was included in an exhibit, "In Nature's Embrace: The World of Harry Bertoia" at the Reading Public Museu...

This early wire wrapped pendant was likely made by Harry Bertoia while he was at Cranbrook.