Jonathan Nesci Furniture

Quarter-inch aluminum plate, digitally cut. Plates intersect and are fused with recessed welds ground smooth. Hand-finished and waxed. The L shelf is the most reduced form in the sh...

The Minimalist wall-mounted 4G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily ...

The wall-mounted, Minimalist 6G Shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily...

Three-eighths inch aluminum plate, digitally cut and bolted — no welding. Hardware recessed and visible. Underside carries recessed rubber sheet with inset signed label. Available as...

Quarter-inch aluminum plate, digitally cut and hand-finished. Three pin-hinged doors integrated flush to the face — no visible hardware. Inset welded U- channel mount on custom-bent...

The wall-mounted, tidal shelf is formed out of 1/4 inch thick, powder-coated aluminum. Each shelf has a welded U-channel to the reverse of the shelf and ea...

Three digitally cut quarter-inch aluminum plates bolted through a welded four-inch deep U-channel frame on the reverse. Plates overlap at the joints, the seam left visible as a struc...

Aluminum sheet and plate throughout. Surface bead-blasted to a consistent matte finish and waxed. Designed as a modular system — two nine-foot tables that function independently or c...

2G wall shelf in .25 inch thick aluminum plate, part of the solo show Nine Variations at Mondo Cane Gallery in 2011. Digitally cut aluminum plates intersect and are fused with recess...

Quarter-inch aluminum plate, powder-coated and mirror-polished. Solid aluminum drawer construction with under-mount soft-close hardware. Lividi — Italian for bruises, specifically t...

The Minimalist wall-mounted, 37" wide, 3G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily mounts on included custom-bent steel Z-clips. Each bay of this modernist shelf...

Three-eighths inch aluminum plate, machine cut and machined. Custom bi-fold doors on concealed hinges. Interior partitioned for dual use — vinyl records on one side, stemware on the ...

Quarter-inch welded aluminum plate, polished and waxed. Freestanding. Designed to display objects and books and to function as a room divider — a freestanding shelf with structural ...

Quarter-inch aluminum plate. One piece of metal with three bends — the bench body, backrest, and legs produced from a single sheet through forming alone. Each work hand-finished and ...

Three-eighths inch waxed aluminum plate, 95.5 inches wide. Inset welded U-channel mount on custom-bent steel Z-clips. Proportioned specifically for 12-inch vinyl record storage — de...

L-wall shelf in .25 inch thick aluminum plate. Digitally cut aluminum plates intersect and are fused with recessed welds that are ground smooth. Plates are hand finished and waxed. I...

The Sentry bench, originally commissioned by New York interior designer Charlie Ferrer, makes a perfect entryway sculptural seat. Made of laser-cut and ...

Infield pedestal in .25 inch thick aluminum plate, part of the solo show nine variations at Mondo Cane Gallery in 2011. Digitally cut aluminum plates inters...

Quarter-inch waxed aluminum plate. Two pin-hinged doors integrated flush to the face. Inset welded U- channel mount on custom-bent steel Z-clips. The OG is a single-bay configuratio...

Quarter-inch aluminum plate throughout. Custom integrated hinge aligned to the interior — doors read as continuous planes when closed, hardware entirely concealed. Originally commis...

The Minimalist wall-mounted, 12 foot long, 8G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the sh...

Minimalist side chair in .25 inch thick aluminium plate, part of solo nine variations at Mondo Cane Gallery in 2011. Digitally cut aluminium plates intersec...

Quarter-inch wax-polished aluminum plate. Produced for The New, the inaugural exhibition of Volume Gallery, Chicago, 2010 — one of the earliest works t...

Three-eighths inch aluminum plate, machine cut. Each element hand-finished, waxed, and bolted together with recessed stainless steel hardware. Underside carries signed label. Design...

Quarter-inch wax-polished aluminum plate. Body welded throughout. Removable interior dividers mechanically fastened — no adhesive, no permanent fixing. Winner of the Wallpaper Desig...

Quarter-inch aluminum plate, digitally cut and hand-finished. Two bays at console depth — deeper than the standard G shelf to accommodate larger objects, books at multiple orientatio...

Three-eighths inch aluminum plate, machine cut. Hand-finished and waxed. Doors with custom integrated hinge aligned to the interior surface — no visible hardware on the face when clo...

General desk made in quarter-inch waxed aluminum. The tiered top has cord drop offsets in the back as well as the bottom. Produced for The New, the inaugural show of Volume Gallery...

Milled, bent, and waxed aluminum plate. Custom aluminum extrusion throughout. Bolted together with stainless steel hardware. The Spot chair develops a seating form from extrusion an...

Steel side chair in hot-dipped galvanized steel. Made of one piece of .25" thick steel plate, formed and dipped in molten zinc. Available in numerous finishes and scales.

Quarter-inch aluminum plate, brushed and anodized. Three bays. Inset bolted U-channel mount on custom-bent steel Z-clips. A narrower configuration of the G shelf family, proportione...

Quarter-inch aluminum plate, brushed and anodized. Three bays. Inset bolted U-channel mount on custom-bent steel Z-clips. A narrower configuration of the G shelf family, proportione...

The Minimalist wall-mounted G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum with two Minimalist pin-hinged doors. Each shelf has an inset welded U-channel that spans...

Quarter-inch waxed aluminum plate. Two drawers with underside Blum motion soft-close glides. Each drawer interior lined in 10-ounce natural canvas. Inset welded U-channel mount. Dra...

Cut and machined aluminum with waxed finish. Quarter-inch thick doors set back a quarter inch from the face of the cabinet — a deliberate reveal that gives...

Cut and machined aluminum throughout. Waxed finish. Doors, back, and sides milled into the legs — each component resolved as part of a continuous surface rather than applied to a car...

Ratio table in .25 inch thick aluminium plate, part of the solo show nine variations at Mondo Cane Gallery in 2011. Digitally cut aluminium plates intersect...

Wall-mounted shelf in .125 thick blackened steel plate. This 5-bay shelf is made of laser-cut, bent and welded steel plate with a blackened finish. Recessed steel mounting brackets a...

Cut, milled, and machined aluminum throughout. Milled acrylic divider inserts set into middle and lower shelves. Waterjet-cut glass top inset to a ledged frame. Casters concealed ben...

Contemporary A_Stool in counter height stool in powder-coated aluminum. A minimal, backless design in durable powder-coated aluminum. Also available in brushed, sanded, or polished f...

Powder-coated aluminum plate and steel throughout. Leather writing surface, hand-finished. The Secretary was the first work in the practice to address the desk-as-object problem dir...

The wall-mounted, Minimalist Shelf is sculpted out of 1/4 inch thick, wax-polished aluminium. Each shelf has an inset welded U-channel that spans the ...

Quarter-inch aluminum plate throughout. Custom integrated hinge concealed within the door thickness —no visible hardware on the face. The sideboard configuration extends the cabinet...

Wax-polished aluminum base with I-beam construction. Solid rift-sawn white oak top, one-and-a-quarter inch thick. One of the few works in the practice to combine aluminum with wood....

Tier side table in .25 inch thick aluminum plate, part of the solo show "Nine variations" at Mondo Cane Gallery in 2011. Digitally cut aluminium plates intersect and are fused with r...

Contemporary A_Stool in counter height stool in powder-coated aluminum. A minimal, backless design in durable powder-coated aluminum. Also available in brushed, sanded, or polished f...

Jonathan Nesci folded aluminum white powder coated Jack Stool. The Jack Stool debuted at ICCF in 2007 and helped to launch the career of contemporary designer Jonathan Nesci. He ha...

A stool in bar height stool in powder-coated aluminium. A minimal, backless design in durable powder-coated aluminium. Also available in brushed, san...

One-inch thick solid aluminum top, milled and polished. CNC-milled solid aluminum legs, one-and-a- quarter inch diameter. Precisely milled and polished acrylic set into the top surfa...

Shade in welded laser-cut steel with zinc coating. Brass hardware. Acrylic diffuser. The Lady Bird lamp was developed as one of the few works in the pr...

Formed and welded aluminum plate. Seams precisely joined; edges radiused by hand. Surface finished in waxed aluminum. The AM table develops aluminum plate as a primary structural an...

Waxed aluminum throughout. Fully resolved on a three-dimensional grid derived from the Golden Ratio. The Bruno chair was a direct formal precedent to the Golden Variation series — t...

2G floor shelf in .25 inch thick aluminium plate, part of the solo show nine variations at Mondo Cane Gallery in 2011. Digitally cut aluminium plates intersect and are fused with rec...

Lady Bird Lamp by Indiana-based designer Jonathan Nesci. The shade of the Lady Bird Lamp is produced in welded laser-cut steel with a zinc coating while...

S.C.T. table in solid 1/2" thick aluminium top with a full-bullnose milled edge with CNC-milled solid aluminium legs. The tabletop and legs are sanded, polished and waxed. Each leg h...

S.C.T. Table in solid 1/2" thick aluminum top with a full-bullnose milled edge with CNC-milled solid aluminum legs. The table top and legs are sanded, polished and waxed. Each leg ha...

The standard table is made in spun, machined and powder-coated aluminum with an inset cast concrete top. Produced for The New, the inaugural show of Volume Gallery...

Half-inch solid aluminum top with full bullnose milled edge. CNC-milled solid aluminum legs, each carrying a cut profile corresponding to its geometric designation — square, circle, ...

Contemporary A_Stool in counter height stool in powder-coated aluminium. A minimal, backless design in durable powder-coated aluminum. Also available in brushed, sanded, or polished ...

100 Variations is an installation by designer Jonathan Nesci at Eliel Saarinen's First Christian Church in Columbus, Indiana from 2014. The installation celebrates the legacy of architect Eliel Saarinen, and became the pilot installation for architecture biennial, Exhibit Columbus. One hundred unique, mirror-polished aluminum occasional tables were installed on the sunken courtyard lawn of the church, comprise the installation. First Christian Church, which was designed by architect Eliel Saarinen, was the first in a series of important architectural commissions in Columbus. The installation pays homage to the “Golden Ratio,” which Eliel Saarinen used...