Steel Abstract Sculptures

Large contemporary sculpture "The Needle Hedge" 1985 By Marianne Hesselbjerg. Exhibitions: GRAND PALAIS PARIS, DEN FRIE CENTRE OF CONT...

Rainbow Sculpture by Christian Friedl Unique Piece. Dimensions: D 50 x H 82 cm. Materials: Steel, rock crystal. Rainbow tells his story... My rainbo...

Prismania room divider by Elise Luttik Limited Edition Dimensions: D 21 x W 70 x H 165 cm Materials: Acrylic with dichroic film. The screen is topped by arches. To Elise Luttik the arches embody a door to a different world. The transparent screen shows engraving inspired by antique crystal glasses...

The proposal from Rampinelli Edizioni was accepted enthusiastically, driven by their talented art directors. The exchange of technologies is perceived as significant for disseminatin...

Handmade by Alessandro Bandiera from FDESTEEL. This carbon steel profile, heat-worked and bent by hand, recalls the face of the French comic character from the 50’s – 60’s. The hand ...

TABLE NO. 15 - SIDE TABLE / CORTEN J.M. Szymanski d. 2023 This Noguchi-inspired coffee table is handcrafted in 3/8” thick steel to create an ulta-modern and inspired look. Custom ...

TABLE NO. 15 - COFFEE TABLE J.M. Szymanski d. 2019 This Noguchi-inspired coffee table is handcrafted in 3/8” thick steel, with a natural black patina and wax finish, to create an u...

TABLE NO. 7 J.M. Szymanski d. 2018 Cut from ⅜” solid steel, these abstract shapes work together to create a contemporary design that is both unique and luxurious. Finished with a n...

TABLE NO. 15 - NESTING SET J.M. Szymanski d. 2019 52'' D  36'' W  13'' H  - COFFEE   32'' D  22'' W  15'' H - SIDE This Noguchi-inspired coffee tables are handcrafted in 3/8” thick...

It is a sign of a most mature culture when articles of everyday use also come to catch the aesthetic eye. Coiling upwards like a snake at a snake-charming is Eckart Muthesius‘ spiral...

TABLE NO. 15 - SIDE TABLE J.M. Szymanski d. 2019 This Noguchi-inspired side table is handcrafted in 3/8” thick steel, with a natural black patina and wax finish, to create an ulta-...

This round stone disc originated in Shanxi province as an early 20th-century threshing wheel. Secured to a wooden axel that ran through the center, the stone was rolled across stalks...

It is a sign of a most mature culture when articles of everyday use also come to catch the aesthetic eye. Coiling upwards like a snake at a snake-charming is Eckart Muthesius‘ spiral...

Jim Rose, known primarily for his steel furniture, was an avid collector and scoured salvage yards for unique, interesting items. Here, a beautifully rusted tobacco box, a steel egg...

Multi-dimensional Industrial style welded and painted steel sculpture, "Mother and Child", by Philadelphia based artist David Tothero. This colorful piece has strong graphic and tex...

All our TOTEM sculptures are hand carved in Southern Africa from sustainable alien timber by a group of Zimbabwean artists who set their own prices, th...

Decorative Steel Sculpture - Mirror Polished Steel Sphere - Space Age Decorative Unusual, attractive and highly decorative abstract sculpture from the 1980s - a stainless steel ball...

Using entirely found and collected steel objects, this sculpture shows the beauty of repurposed steel. Meticulously crafted, artist Jim Rose was a master welder as well as artistic c...

Standing 63cm tall, this pair of unique sculptures represent a couple, hand crafted in pigmented scagliola - a lengthy process that involves multiple stages of craftsmanship, sandi...

David Partridge nail sculpture from an important private corporate commission. The sculpture can be repositioned on the stand to change the appearance. This is an extraordinary examp...

Masterfully handcrafted in Italy, Kazimir screens are not only a perfect divider for minimalist or classic rooms, but also a symbolic bridge, linking design to art, functionality to decoration. In fact the shapes of this screens, closed in a set, a collection composed by 3 single elements (Type A, Type B and Type C), are freely inspired on the figurative abstract works by the renowned painter Malevich, a pione...

Table No. 15 - ALTO J.M. Szymanski d. 2022 This Noguchi-inspired coffee table is handcrafted in 3/8” thick steel, with a natural black patina and wax finish, to create an ulta-m...

This is a curated collection of Dansk Pepper Mills Designed to be displayed symmetrically to resemble one side of a chess board. All of the grinders ...

Jim Rose, known primarily for his steel furniture, was an avid collector and scoured salvage yards for unique and interesting items. Here, a collection of found steel is reworked, pr...

Very interesting set of sculptures with curved spiral shapes signed by the artist, numbered and dated. Each sculpture was made in a different year fr...

I-Beam sculpture done by artist John Piet of Detroit, Michigan. Retains original red/orange steel primer color with variations to steel finish with light oxi...

'Illuminated Dwelling' lamp by American artist James Bearden, from his Cathedral series. Hand-forged of blackened and polished steel in 2015.. A one-of-a-kind design that is essentia...

CONSOLE NO. 2 J.M. Szymanski d. 2018 A refined and sleek design, this console table is carved out of blackened and waxed steel. The legs are finely tapered and make this elegant co...

1928 - 2005 Original artwork. Armand was an artist who used found objects as his medium and encased them in resin form. This rare scale of his work appears to be a token example for an exhibition given out to patrons for a show. No two are alike. It's stamped within "Arman Galerie Lawrence 11 Mai 1965 De 5 A 8". Mixed industrial metals encased in resin. Great jewel of an art object for collections of modern art. The size is 1 1/8"h x 1 7/8" x 2"... From the estate of the late Naomi Caryl...

City welded steel Measures: 18 x 22 x 14-1/2 in. Artist statement: I seldom use stock material, but prefer distressed and rusted steel that has been scarred, bent, and made imperfect. In this state, the material becomes quite beautiful. There are figurative elements in my work, though I am more drawn to the non-figurative, to the raw and essential aspect of steel. The Industrial purpose of steel must be considered, its use in construction, manufacturing, the military. Steel is forged with enormous energy and power. The process is violent, loud. Here, it is still and approachable. The compositions are constructed mainly from found parts. Their relationships manifest as I interact with the material. The pieces interlock, balance, and become fitted before I fasten or weld them together. The engineering is elemental. Altering the material is avoided. The number of parts kept to a minimum. Art is my spiritual exercise, my selflessness. It identifies me as a creator and satisfies my human longing for place and purpose. It needs not to be great, or preeminent, or commercial. Art speaks because it is Primitive. It exists because it is sacred. Biography: Scott Gordon...

Altar II welded steel Measures: 5 x 18.5 x 23 in. Artist statement: I seldom use stock material, but prefer distressed and rusted steel that has been scarred, bent, and made imperfect. In this state, the material becomes quite beautiful. There are figurative elements in my work, though I am more drawn to the non-figurative, to the raw and essential aspect of steel. The Industrial purpose of steel must be considered, its use in construction, manufacturing, the military. Steel is forged with enormous energy and power. The process is violent, loud. Here, it is still and approachable. The compositions are constructed mainly from found parts. Their relationships manifest as I interact with the material. The pieces interlock, balance, and become fitted before I fasten or weld them together. The engineering is elemental. Altering the material is avoided. The number of parts kept to a minimum. Art is my spiritual exercise, my selflessness. It identifies me as a creator and satisfies my human longing for place and purpose. It needs not to be great, or preeminent, or commercial. Art speaks because it is Primitive. It exists because it is sacred. Biography: Scott Gordon was born in Ridgewood, New Jersey in 1966. He attended the University of Denver where he studied business and the University of Washington where he pursued an MFA in creative writing. While he was in Seattle, he was introduced to steel as an employee of the David Gulassa...

A beautiful and rarely seen bronze and steel sculpture by American artist Gerald DiGiusto. Signed and dated 1981 this is Triangolar Totem #1 , the original . Signed, dated and title...

CONSOLE NO. 4 J.M. Szymanski d. 2020 A sleek table, bent from a seamless piece of 3/8” thick steel. The table appears to float on a single peg. The table is attached to a wall from...

Believed to be one of Marcello Fantoni's (1915 - 2011 ) earlier works sculptor, ceramicist, metalworker, multi-media artist and designer . A study in patina and corrosion in brutal...

This is the first out of 25 of these extra large abstract metal sculptures made in 1978 by Dan Murphy It is mounted on a 12 x 12 x 3 Lucite base.

Designed by an unknown Japanese craftsman. A pair of heavy welded bookends, minimalist in design and creation. Forged belt of thick metal bent to create a 3D abstract bird form. Some...

Table No. 5 J.M. Szymanski d. 2022 This side table is composed of stark, perpendicular planes that have been notched and precisely slotted together. Its hand-carved rough edges cont...

Using entirely found and collected steel objects, this sculpture shows the beauty of repurposed steel. Meticulously crafted, artist Jim Rose was a master welder as well as artistic c...

Fabulous and powerful, 1/4hp GM Delco motor. Globe deli meat slicer from the forties. Super quiet motor with a new cord and switch. In excellent vintage co...

CONSOLE NO. 3 J.M. Szymanski d. 2020 A refined and sleek design, this console table is carved out of blackened and waxed steel. Horsehair accents help enhance the intrigue of the t...

A massive brutalist sculpture from the Paul Evans & Harry Bertoia Era circa 1970's. It consists of welded steel construction with some brass and bronze overlays. Originally this had ...

Jim Rose, known primarily for his steel furniture, was an avid collector and scoured salvage yards for unique and interesting items. Here, found steel objects are welded together to ...

Jim Rose, known primarily for his steel furniture, was an avid collector and scoured salvage yards for unique and interesting items. Here, a collection of spare parts come together ...

The giraluna is a spectral plant entity from Leo Lionni's Classic alternate universe  textbook Parallel Botany.  About the Sculpture: The Giraluna This elusive and capricious plant is the Dream Queen of parallel botany. Hydendorp, quite rightly, does not hesitate to define it as the "most parallel of plants, most plantlike of the parallels," and in so doing he stresses not so much its physiognomic oddnesses as the disconcerting normality of its shape. "If we were in the jungle," he writes, "and we found one blocking our way, we would not for an instant hesitate to hack it down with our machetes."1 But it will not be our good fortune to encounter it. If in reconstructions the Giraluna displays considerable plantness of form and an exact and convincing solidity, in its natural environment it can be perceived only as a nebulous interplay of glimmerings and empty spaces which alternate in the darkness and vaguely suggest where its outlines might be. (pl. XXIV) Its nocturnal presence, in fact, is manifested almost entirely in terms of the equivocal O'-factor of the moonbeams, which was discovered and measured a few years ago by Dennis Dobkin of the Point Paradise Observatory. This factor changes the light-shade ratio which normally defines volumes into a subtle interplay of lucencies and opacities, so that our perceptions, our basic sensorial habits conditioned by thousands of years of daytime life in the "solar key," would need complete readjustment and indeed reversal in order to come to terms with it. Daylight isolates objects, bestowing a noisy Meaning on all the odds and ends in the world. But night takes everything away except the very soul of things: a black light, a transparent darkness, a secret we cannot grasp. During the long night of the Erocene era man caught a glimpse of the Giraluna rising mysteriously in its barren landscape. Presolar man imagined himself the child of the Moon. In her lap he had known the comfort of the life, silent torpor of the night, and by her light he had seen silver pearls lie weightlessly upon the coronas of the first great flowers. But he left us only a few enigmatic signs of all this: the Feisenburg cave, the petrified bones in the Ahmenstadt tumulus, the Boergen Cup. Paradoxically enough, all that we do in fact know of his presence in that landscape comes to us from our study of his nocturnal vegetation, Around the middle of the Erocene era, when the flowers of night were fading away in the light of a new dawn, man saw that outlines and colors were slowly hardening. Thus he discovered the stone-hard world of day, and learned to be the child of both Sun and Moon, of Amnes and Ra, of Disarm and Karak, of Nemsa and Taor. The "crawling stones" of Yorkshire, the stele of Tapur, the graffiti of Klagenstadt, these have preserved for us the nearly obliterated images of the two divinities who from the center of their temples drew the design of the universe. But the Sun was not long in attaining absolute power over everything in the world. "O Ra, o Amno Ra our benefactor, glowing and flaming! Gods and men bow down before you, for you are their creator and their only Lord." Such was the prayer of Amresh, High Priest of Egypt. And a new vegetation, outspoken and exuberant, appeared on the earth, and made the bright leaves dance in the morning breeze. Night soon became no more than a dark corridor joining one day to another, a place of visions and memories, a storehouse of words and images. It became a secret refuge where the vanished flowers could once more flaunt their coronas to the Moon. And thousands of years later the black flowers of that distant night-Giraluna, Lunaspora, Solea argentea-were born from seeds hidden deep in a soil rich with legends and stories. If our knowledge of the Giraluna is today reasonably complete and detailed this is due to the industry and scholarship of Professor Johannes Hydendorp of the University of Honingen, who has collected and collated all known facts and kept his records abreast of the latest developments. Our historical and geographical information comes from the most varied sources: legends and folk tales handed down from generation to generation, accounts given by explorers, anthropologists, and paleontologists, and of course the more recent testimony of botanists such as Heinz Hornemann and Pierre Maessens. Source: Sivatherium. narod .edu About Sculpture: Leo Lionni is best known today for his children's books: Little Blue and Little Yellow; Frederick—the one about the mouse who gathers poems while his family is harvesting seeds for the winter—Swimmy the Fish. Of course the children don't remember his name, but to parents and grandparents, the ones who actually do the reading, he is something of a celebrity. Most people don't realize that Lionni is also one of the 20th-century's most influential graphic designers. Within that field, he is a legend. In fact, he didn't start doing children's books until he had left the world of advertising, teaching, and design to allow more time for contemplation and for art. Little Blue and Little Yellow (1959) began as an improvised entertainment for bored grandchildren. What can you do with a few scraps of colored paper and a lot of imagination ? Make the first best-selling children's book illustrated with abstract art. Before that his work as design director for Olivetti Corporation of America and the art director of Fortune magazine, the co-founder of the Aspen...

Bent Metal Table with Wood Legs in the Trompe L'oeil Style of John Dickinson A truly unique and original console table crafted from solid wood and be...

Rainbow Sculpture by Christian Friedl Unique Piece. Dimensions: D 50 x H 82 cm. Materials: Steel, rock crystal. Rainbow tells his story... My rainbo...

This brutalist metal round sculpture has an amazing patina and a very modern feel. The piece, composed of rusted nails, steel, and a wood base is heavily influenced by Brutalist aest...

MAN welded steel Measures: Artist statement: I seldom use stock material, but prefer distressed and rusted steel that has been scarred, bent, and made imperfect. In this state, the material becomes quite beautiful. There are figurative elements in my work, though I am more drawn to the non-figurative, to the raw and essential aspect of steel. The Industrial purpose of steel must be considered, its use in construction, manufacturing, the military. Steel is forged with enormous energy and power. The process is violent, loud. Here, it is still and approachable. The compositions are constructed mainly from found parts. Their relationships manifest as I interact with the material. The pieces interlock, balance, and become fitted before I fasten or weld them together. The engineering is elemental. Altering the material is avoided. The number of parts kept to a minimum. Art is my spiritual exercise, my selflessness. It identifies me as a creator and satisfies my human longing for place and purpose. It needs not to be great, or preeminent, or commercial. Art speaks because it is Primitive. It exists because it is sacred. Biography: Scott Gordon...

Bird I wood, steel, carpenter’s level, bronze 12 x 8 x 31 in Artist statement: I seldom use stock material, but prefer distressed and rusted steel that has been scarred, bent, and ...

Welded steel Brutalist sculpture by Paul Kasper, circa 1960s. Was purchased from the estate of Paul Kasper. Biography Paul Kasper. Paul Charles Kasper was born in Whiting, I...

Decorative crystal sphere on steel base, circa 1970s. The piece is in very good condition with no chips or cracks; it has a nice polished fin...

"Mono Table" Cal Summers d. 2021 A coffee table made from a unique composite material developed by Cal Summers. Graphite, resin, wood fiber, and exposed steel frame. Available in cu...

A large abstract floor sculpture made by Cutis Jere in 1984. A great post modern design in grey cut steel. Artist signed and dated.

Hobnail tile wall piece by Gentner Design Dimensions: D 30 x H 40 cm Materials: steel Hand-formed from a sheet of steel, emphasizing the material’s pliable characteristics expre...

Minimalist style geometric welded steel sculpture, "Assemblage IV", by Philadelphia based artist David Tothero. This piece has a mixture of strong geometric shapes and is signed wit...

Jim Rose, known primarily for his steel furniture, was an avid collector and scoured salvage yards for unique and interesting items. Here, a collection of found steel is reworked, pr...

An African currency bracelet on a custom black steel mount. Bracelet alone measures 4.5"W x 1.5"D x 4.75"H.  

Classic modernist contemporary wall art sculpture. Brass and black enamel construction. Retains original C Jere hang tag. Stunning.

This round stone disc originated in Shanxi province as an early 20th-century threshing wheel. Secured to a wooden axel that ran through the center, the stone was rolled across stalks...

Sculpture stone Totem D made with soapstone and with carbon steel ornaments. Totem realized by milling soapstone into geometrical shapes.

American Mid-Century Modern Brutalist sculpture of tortured and burnt welded steel.

A stunning torch cut steel and fused bronze vessel by the noted Des Moines, Iowa artist James Bearden. This piece is part of the artist’s Spore series and we are fortunate to have a ...

This composition of the artist Franck Cota is a pure creation of Brutalist design, whose balance is achieved through its verticality. The sculpture is made of metal elements, some of...

All our TOTEM sculptures are hand carved in Southern Africa from sustainable alien timber by a group of Zimbabwean artists who set their own prices, thus making them fair trade. We t...

TABLE NO. 15 - SIDE TABLE / CORTEN J.M. Szymanski d. 2021 This unique finish is achieved by placing the table outside on our studio terrace for several weeks. Each piece will develo...

Table No. 5 - Coffee J.M. Szymanski d. 2023 This coffee table is composed of stark, perpendicular planes that have been notched and precisely slotted together. Its hand-carved rough...

Flow Gold is the epitome of elegance and innovation—a creation that transcends the ordinary bar and counter stool to become a functional work of art, elevating any space with a touch...

Wiso by DIAPHAN STUDIO, Represented by Tuleste Factory 11.4” x 11.4” x 4.7” Brass or Steel, Frosted Acrylic, Magnets Wiso is a wall light that displays the growth patterns of natu...

The heartwood is the inner part of the wood, its steel-hard core corresponds to the oldest growth zones formed by the tree. It is this dark material that persisted in the European walnut logs...

Designed and studio-made by American craftsman James Bearden, this chime sculpture is among the largest made, and the largest on sale today. An early m...

This round stone disc originated in Shanxi province as an early 20th-century threshing wheel. Secured to a wooden axel that ran through the center, the stone was rolled across stalks...

Mid-Century Modern steel table top abstract sculpture by internationally recognized French artist Albert Feraud, (1921-2008) Paris, France. Sculpture sign on base. Circa 1960's. Feraud created his unique sculptures from found materials from scrap metal and sky scrappers. Albert Féraud studied at the schools of fine arts of Montpellier, Marseille and Paris in the studio of Alfred Janniot...

This Avant Garde commode is made of Carrara marble and high-quality powder-coated steel. The function of this piece is more sculptural and decorative but at the same time, it can be ...