Steel Seating

Hans Könecke for Tecta, pair of 'Sling' lounge chairs, model 'D99', lacquered steel, steel, leather, Germany, 1960s This pair of 'D99' lounge chairs was designed by Hans Könecke fo...

Shiro Kuramata for Vitra, 'How High the Moon' lounge chair, nickel-plated steel mesh, Switzerland, design 1986 Shiro Kuramata’s ‘How High the Moon...

Grassi&Bianchi for Enrico Pellizzoni, set of eight 'Pascqualina' dining chairs, leather, steel, Italy, 1980s The Pasqualina armchair, designed by Grassi & Bianchi for Enrico...

Gionathan de Pas, Donato D'Urbino and Paolo Lomazzi for Poltronova, 'Joe' glove lounge chair, cognac leather, brass-plated steel, Italy, 1970 This extraordinary chair, named the ‘Jo...

A set of eight dining chairs after Jean Prouvé’s Standard chair. Moulded plywood seat and back on a lacquered steel frame, with broad tapering rear legs and slender tubular front leg...

Wonderful set of 10 dining chairs by Mario Bellini 1980's. 2x cab 413 and 8x cab 412 by Cassina. We have a total of 4x cab 413 and 12x cab 412 at the moment, please inquire if you n...

Grassi&Bianchi for Enrico Pellizzoni, set of ten 'Pascqualina' dining chairs, leather, steel, Italy, 1980s The Pasqualina armchair, designed by Grassi & Bianchi for Enrico Pellizzon...

An elegant vintage example of the celebrated LC4 chaise longue, designed by Le Corbusier, Pierre Jeanneret and Charlotte Perriand and manufactured by Cassina in Italy circa late 1970...

Rocking chair / chaise longue, lacquered steel, leather, rubber rope, France, 1960s Dating from the 1960s, this remarkable rocking chair carries with it a certain mystery. Its maker...

Stunning and rare set of four iconic MR10 cantilever chairs in chromed tubular steel and hand-woven rattan. Designed by Ludwig Mies van der Rohe and produced by Knoll International d...

Giovanni Carini for Planula, set of twelve 'Libellula' dining chairs, canvas, lacquered steel, steel, Italy, ca. 1969 Giovanni Carini’s Libellula chairs for Planula are made from s...

One Swivel Chair by Gianni Moscatelli for Formanova Milano, 1970s. Fabric is very stained, we recommend to reupholster. We offer upholstery services.

Herman Miller Wireframe Three-Seat Sofa by Sam Hecht & Kim Colin Designed by Sam Hecht and Kim Colin for Herman Miller, the Wireframe Sofa pairs generous upholstered cushions w...

Dimensions: approx. 196 × 98 × 65 cm (77.2" × 38.6" × 25.6") Width × Depth × Height. Barcelona Daybed, designed in 1930 by Ludwig Mies van der Rohe and produced by Knoll Internation...

Hans J. Wegner, ‘Flag Halyard’ lounge chairs model ‘GE225’, rope, steel, dark green lacquered steel, leather, wood, sheepskin, Denmark, 1958 and 1950s/60s This iconic chair, made wi...

Cantilever side chair in the style of Marcel Breuer's D41 design, produced by Tecta. The chair features a black painted tubular steel sled frame with a continuous curved profile and ...

The Petite Orsini Ottoman features a minimal metal base with decorative ball feet and an upholstered seat. The Lawson-Fenning Collection is designed and handmade in Los Angeles, Ca...

Pair of Zanotta model: 2062 Castiglia chairs - by Achille Castiglioni & Marcello Minale, 1968 Chromed tubular steel frame with thick, nicely patinated leather seat and backrest....

Set of 4 black Cesca chairs was made in Italy in '70s. It's fabulous iconic piece of furniture and also very comfortable to sit on. It's perfect for the dining area or as a decorat...

Spectacular set of eight Guido Faleschini Tucroma chairs for the pace Collection. Beautiful craftsmanship with ultra soft brown leather on minimal chrome round tube frames. In excell...

Sofa, fabric, lacquered steel, brass, Italy, 1950s This eccentric sofa features an interesting composition. The seating area and the backrest are organically shaped and together wit...

Hans J. Wegner, ‘Flag Halyard’ lounge chair model ‘GE225’, rope, steel, dark green lacquered steel, leather, wood, sheepskin, Denmark, 1958 This iconic chair, made with 250 metres o...

Armchair with ottoman mod. Crossbow, acid-etched iron structure and leather upholstery, stamped signature of Marzio Cecchi on the frame The search for material flexibility by archit...

Mid Century Danish Modern Arne Vodder for Sibast Rosewood Leather Desk Chair. Rare danish rosewood desk chair made in Denmark circa 1970. Has adjustable height. Located in Brooklyn N...

Isobel sofa in original Kravdat Tonus 4 orange fabric designed by Michiel Van Der Kley for Artifort, 2000s. The Isobel sofa is characterized by its retro-futuristic look. Designer v...

A beautiful example of an original Ernest Race Heron Chair circa 1955. Designed by Ernest Race and Manufactured by Race Furniture. Owned by one famil...

ABOUT Antique solid oak adjustable swivel banker's or library desk chair in a mahogany finish featuring a classic vertical slat back and a heavy cast-iron swivel base with rolling c...

Pair of Vintage Mid Century Modern Black leather Wassily lounge chairs for Knoll. The Wassily lounge chair was designed by Marcel Breuer in Black full leather. Has flat caps on the e...

Pair of vintage suede-upholstered chairs by Eero Aarnio. Chairs feature original padded seats and backs in suede with chrome-plated steel frames, exemplifying late modern Scandinavia...

The Holland Stool Upholstered leather seat top and back / premium foam cushion / solid wood leg braces / solid steel construction / durable powder coat finish Frame - Black, Bronz...

Bauhaus style industrial chair by Admi Mobel, Germany - in tubular steel / bent laminated plywood / exposed round rivets. See picture 6 of circular blue paper label signed Admi w/ tw...

Set of four cantilever side chairs produced by Tecta, following the D41 design developed by Marcel Breuer in the late 1920s. Each chair features a chrome tubular steel sled frame supporting a woven synthetic seat and back shell. The open basket-weave pattern in black synthetic material forms a continuous curved shell from seat to back, sitting atop the signature C-form cantilever base with small rubber feet. Breuer developed the cantilever chair concept at the Bauhaus, drawing on the structural principle that a continuous steel tube, properly tensioned, could replace the traditional rear legs entirely. The D41 became one of the definitive expressions of this idea, pairing the industrial clarity of the steel frame with a woven seat and back that softened the chair's structural rigor. Tecta, the German manufacturer, has long produced Bauhaus-lineage furniture...

Set of 4 original and signed "Plia" pink lucite folding chairs. NOS (new old Stock) This fantastic set was designed by Giancarlo Piretti for Castelli in 1967. PLIA, the symbol of a n...

Afra & Tobia Scarpa for Cassina, 'Soriana' sofa with ottoman, leather, chrome-plated steel, Italy, 1969 Iconic design by Italian designer couple Afra & Tobia Scarpa. The ‘Soriana’ p...

Luigi Caccia Dominioni for Azucena, lounge chairs, leather, chrome-plated steel, Italy, 1963 These cubist lounge chairs in grey leather were designed by Luigi Caccia Dominioni for ...

Set of 12 original and signed "Plia" pink lucite folding chairs. NOS (new old Stock) This fantastic set was designed by Giancarlo Piretti for Castelli in 1967. PLIA, the symbol of a...

A rare and beautifully preserved suite of six French dining chairs, dating from the 1980s and strongly reminiscent of the celebrated designs created by Annick and Samuel Coriat for A...

Here is a fantastic modular sofa and table set by George Nelson for Herman Miller, circa 1960s. This item is in excellent condition for its age and was re-upholstered in 2007 with a...

A rare limited-edition example of the iconic Antony Chair, originally designed in 1954 by Jean Prouvé and produced by Vitra. This sculptural piece is celebrated for its striking bala...

Iconic Eames Molded Fiberglass Armchair designed by Charles and Ray Eames and manufactured by Herman Miller in the United States in 2019. #5664 This striking example features a viv...

Dining chairs, beech, coated steel, Europe, 1980s The design of these 1980s chairs avoid sharp edges or overly angular forms, leaning instead into cylindrical legs and rounded corne...

Dining chairs, beech, coated steel, Europe, 1980s The design of these 1980s chairs avoid sharp edges or overly angular forms, leaning instead into cylindrical legs and rounded corne...

Dining chairs, beech, coated steel, Europe, 1980s The design of these 1980s chairs avoid sharp edges or overly angular forms, leaning instead into cylindrical legs and rounded corne...

Robert Mallet Stevens for Stevens designs, dining chairs, lacquered metal, fabric, France, design 1928, production later Admirable set of white lacquered tubular chairs with striped...

Custom One-Armed lounge chair 33" H x 39" W x 30" D Seat height: 16" Shearling upholstery in an off-white/beige color. Lacquered steel legs. Condition: Overall very good condit...

Underpass is a contemporary bench inspired by the simple forms and robust construction of freeway interchanges. Foregrounding the natural beauty of solid wood, a blackened steel chas...

Afra & Tobia Scarpa for Benetton Office, folding stool or ottoman, leather, steel, Italy, 1985. This stool is designed for the office of the clothing brand Benetton by Afra & Tobia ...

Stunning and rare pair of iconic MR10 cantilever chairs in chromed tubular steel and hand-woven rattan. Designed by Ludwig Mies van der Rohe and produced by Knoll International durin...

Giuseppe De Vivo, pair of dining chairs, model ‘55136’, coated steel, reupholstered in Pierre Frey Georges Vieux Rose fabric, Italy, design circa 1933, production 1950s These rare ...

ABOUT Antique solid oak adjustable swivel banker's or library desk chair with cast iron mechanisms. Rolls smoothly. The spring loaded back rest tension and the height is adjustable....

Olivier Mourgue for Airborne, chaise longue, black leather, steel, France, 1960s A rare chaise lounge from the 'Whist' collection by Olivier Mourgue. The piece is wonderful in its d...

Versatile modular sofa produced by Interier Praha in Czechoslovakia around 1970. The design combines a long mahogany veneered platform with minimalist black steel supports. Thanks to...

wonderful set of four T-chairs, model 3LC, designed by William Katavolos, Douglas Kelley, and Ross Littell for Laverne International, United States, c. 1950. The set features three-l...

Paul Evans for Directional, dining chairs, model PE-106, epoxy bronzed resin over steel, fabric, United States, circa 1970 These dining chairs are designed by Paul Evans for Directi...

Set of 4 chairs B33 designed by Marcel Breuer in dark brown leather. Produced by Gavina in the 60s. They are in good vintage condition with minor traces of age, as visible on photos.

Ole Gjerløv-Knudsen & Torben Lind for France & Søn, three-seat sofa, steel, leather, Denmark, 1960s A modern and beautifully designed navy-green sofa designed by Ole Gjerlø...

Designed by Dutch designer Dick Spierenburg for Castelijn in the late 1970s, the Model SDC armchair stands out for its boldly architectural, raked frame. Flat black enameled steel me...

Tito Agnoli for Cinova, sofa or daybed model 711, red leatherette, steel, laminated wood, Italy, 1968. Cubic sofa that can be transformed into a daybed by Italian designer Tito Agno...

Dining chairs, yellow leatherette, chrome, steel, Italy, 1970s Comfortable Italian dining chairs in yellow leatherette. The eye-catching colored upholstery emphasizes the round sha...

Embrace the refined simplicity of modern architecture with this stunning MR10 cantilever chair, designed by the renowned Ludwig Mies van der Rohe circa 1930 and crafted by an unknown...