Vintage Rotary Switch

a 12" brass base. Pierced brass shade with three-way rotary switch.

Candles" on brass metal base and rotary switch at top. Base 7".

base. Each lamp has eight candelabra base lights controlled by a rotary switch on top.

undamaged, rotary switch on white electric wire, made in Italy, late 1970's Diameter of 10'' approx

chrome-plated gooseneck. Original socket for E 27 bulbs with ceramic rotary switch, new wire. Good

inside the shade. Original 3 inch finial and rotary switch in base. Original shade is ok, but probably

mounted adjustable lamps, with a hidden uplight. Four rotary switches control the lamps individually. A

chain attached with a rotary switch. Dimensions: Diameter: 16.25," height: 8.5" Condition

bulb. Attributed to Gerald Thurston, the rotary switch is marked "Lightolier."

and desirable three way rotary switch. These heavy, and elegant lamps are a grounding show stopper in

" decorative globe bulbs. Rotary switches on bulb cluster. Shades are 8" x 17"

as both a rotary switch and a handle to adjust tilt.

enamel spun aluminum dome shade. The stem and base are aluminum with white enamel and a rotary switch on

" square column on the bias of 14" square base. Two rotary switches mounted high on the side control the

ornate acanthus. Original brass rotary switch at base, the lamp has been cut down just above the acanthus

the glass. The lamp has been rewired and includes an on/off rotary switch along the cord.

towards the bottom. The lamps allow for two light settings with a rotary switch on the brown cloth cord

walnut base with brass 'stems' and fiberglass shades. Also has a rotary switch and lights up three ways

crafted bronze vanity base with graceful scrollwork detailing. It operates with a convenient rotary switch

be turned sideways. The original socket requires standard E27 / E26 light bulbs. The rotary switch is

for these lamps. The lamp has three light settings which can be adjusted on the rotary switches

newly rewired and has two horizontal side-by-side bulb sockets with pull chains. An additional rotary

tiers. It is paired with a white linen shade that attaches to the top of it's brass stem. The rotary

angles. These are a classic! Newly rewired with rotary switches on the cords. Dimensions: 34 in

lamp is rewired and has two S-cluster bulb sockets with pull chains. An additional rotary switch is

require a single bulb. A rotary switch is located on the cord and can be used to adjust the intensity of

when the lamps are on. The Cords are The Original Gold Toned Cords with Rotary Switch 1970s

variable use. The lamp can be dimmed using a continuously variable rotary switch on the lamp base. The

frame made of metal. Rotary switch on the screen. Fully functional and without damage, no bumps or dents

display shelf is flanked by electric candle lights and controlled with rotary switch, circa 1940

hardware. The light can be adjusted with the two-way rotary switch attached to the cord. This pair is an

two-way rotary switch attached to the cord. In addition, the lamps are paired with navy blue opaque

light, color, and movement. They are newly rewired with single bulb sockets and rotary switch cords

small droplets of light to shine through for a unique detail to the piece. The lamp has a rotary switch

wood below. You can see in the last photo. One original brass ceramic E27 socket with rotary switch

original rotary switch on the foot. At one lamp a small piece broke off but it still works (photo 9) Fully

tested, the lamp is controlled with a polished cast brass rotary switch mounted to one of the tripod legs

directions and holds in every position. The rear handle is also the rotary switch for the lamp. 100

environment. This lamp has been rewired and retains its original porcelain socket and rotary switch, all

plugged into the sockets. Three-stage rotary switch on the lower metal frame. Turning to the right turns

rotary on off switch.

", 19.5" and 24" Rotary dimmer switch in tallest cylinder. Shown with 6" lightbulbs.

. Wired to US standards with rotary dimmer switch, braided cloth cord. Shade not included.

diffusers are held in place by three brass capped pins. Rotary on/off switch is the tip of the conical

original with soft, white matte finish; extra long 17 foot cord; rotary line switch; and 11 inch diameter

lamp. All original with soft, white matte finish; extra long 17 foot cord; rotary line switch; and 11

, requires a single bulb; includes rotary on-off light switch to cord. Very good condition, consistent with

7.5" width x 6.5" depth x 15.25" height Condition Good vintage condition. Original wiring with rotary

switch offers rotary dimmer control. Original Harvey Guzzini, Model 4510 labels intact. The lamp has

double sockets and rotary cord switches.  Dimensions: 13 in. height 14 in. width 12 in. depth.

also angle adjustable. Medium base incandescent light source with elegant Lucite disc-form rotary

double sockets that can be turned on with metal pull strings. There's also a rotary cord switch to

bedroom. Specification: Number of light sockets: One Switch type: Rotary 3-way Power source

brass and plexiglass column, multiple rotary switch assembly for 1, 2 or 3 bulbs. Very good condition

Set of two vintage tall table lamps with all-brass base and rotary switch. The lamps was restored

curved warm white foam lacquered wood base with 10D white frosted globe. With rotary switch. Mod

brass and plexiglass column, multiple rotary switch beneath diffuser assembly for 1, 2 or 3 bulbs