Charles and Ray Eames Lounge Chairs

2nd Gen Eames lounge chair with ottoman fully restored. New shock mounts, reupholstered cushion in pine green full grain leather, and refinished shells, re-polished steel frame.

Iconic Lounge Chair and ottoman designed by Charles Eames and Ray Eames, produced by Herman Miller in the late 1950s. The ottoman is a licensed production by Nordiska Kompaniet, Swed...

Third Generation Eames Lounge Chair and Ottoman 670/671 featuring exceptional grain in the original finish rosewood shell and restored black leather cushions. This is one of the mos...

Original Eames 670 lounge chair and 671 ottoman in chocolate brown leather, issued by Herman Miller. The molded plywood shells are richly figured Brazilian rosewood, with dramatic gr...

One of the most iconic designs of the Mid Century period the Eames 670 lounge chair with 671 ottoman . In the very desirable soft black leather and enhanced even further with a rich ...

Not a color you see often! A classic Eames lounge chair and ottoman with vintage wood and metal components outfitted in brand new leather cushions in Avocado shade. 3-4 week producti...

One of the most iconic designs of the Mid Century period the Eames 670 lounge chair with 671 ottoman . In the very desirable black leather and enhanced even further with a rich Brazi...

We were fortunate to acquire this rare 1964 Eames chair and Ottoman in black leather and Rosewood veneer. The label dates them to a specific year as the double ring round Herman Mill...

A lovely white leather Eames lounge chair and ottoman with a white ash shell. The chair and ottoman are both tagged Herman Miller and are dated 2014. They are in very good condition ...

Iconic Eames Lounge Chair and Ottoman by Herman Miller, dating from the 1960s and crafted in richly grained Brazilian rosewood with original black leather upholstery. Designed by Ch...

Hard to find early Eames design lounge chair, in very good, clean, ready to use condition. The chair features the large single piece rubber bumper and 4/2/5 screw configuration, help...

A restored vintage signed and authentic Herman Miller Eames lounge chair and ottoman in rose wood with custom new blue leather cushions with smooth and comfortable finish. The wood i...

Classic black leather and Brazilian rosewood Eames lounge chair and ottoman. Signed authentic original Herman Miller production. Wood refinished. Leather cleaned and conditioned. Cir...

Simply stunning restored Eames lounge chair and ottoman by Herman Miller. Spectacular color and grain detail on the outer shell...

Handsome classic Eames lounge chair and ottoman. Executed in rosewood and black leather. Cast aluminum bases, with adjustable “domes of silence” leveling glides. Extremely comfortabl...

Beautiful custom edition of the iconic Eames lounge chair and ottoman. Rosewood shells and aluminum bases cradle the custom burnt orange leather cushions. New leather very soft and i...

This is an Eames Lounge Chair and Ottoman, Models 670 and 671, originally designed by Charles and Ray Eames for Herman Miller in 1956. This set was produced in the United States in 2...

The iconic first generation 670/671 lounge chair with ottoman by Ray and Charles Eames for Herman Miller, c.1959, USA. This version has down filled cushions and round silver upholste...

Not a color you see often! A classic Eames lounge chair and ottoman with vintage wood and metal components outfitted in brand new leather cushions in Avocado shade. 3-4 week producti...

2006 DCW Lounge Chair by Charles and Ray Eames for Herman Miller, USA. In good condition with some signs of wear commensurate with age. Some scratching and scuffing to seat and a s...

A very early 1st generation rope edge rare lounge height fiberglass arm shell chair with the larger rubber shock mounts having metal washers and satin black iron X base. The chair st...

Incredibly vibrant and elegant edition of the classic Herman Miller Eames lounge chair and ottoman, circa 1960s-70s chair with original Herman Miller label. Custom leather cushions i...

A particularly good early production Eames Lounge Chair and Ottoman, designed by Charles and Ray Eames for Herman Miller, dating to the early 1960s. A highly desirable and authentic ...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1970 and has Brazilian rosewood shells.

Prominent grain 3rd Gen Eames lounge chair with ottoman fully restored. New shock mounts, restored original leather and oiled shells, re-polished steel frame.

We are pleased to present this absolutely incredible 1960s Herman Miller Eames Lounge Chair and ottoman with "fire engine red" leather. This is a very rare find. Features the famou...

This rare first-generation Eames Lounge Chair with matching ottoman was designed by Charles and Ray Eames and produced by Herman Miller between 1957 and 1959. Conceived with the comf...

Here is a rare opportunity to own two early examples of the iconic design by Charles and Ray Eames, these 670 lounge chairs and matching 671 ottoman have been together since they wer...

Early production RKR-1 Wire Mesh Rocking Chair designed by Charles & Ray Eames and introduced by Herman Miller in 1951. This example retains its original one-piece leather cover, pl...

Eames Molded Fiberglass Armchair for Herman Miller "Seafoam Green"' Arguably one of the 20th century’s most beloved designs, the Eames Shell chairs remain a sought after design classic nearly 55 years later. The molded fiberglass chairs are the result of Charles and Ray’s 6 years of experimenting with molded plywood to create a single shell form. Unable to successfully create the single shell with molded plywood at the time, Charles & Ray saw an opportunity to fulfill their vision using a new material: fiberglass. Charles Eames famously said, “The role of the designer is that of a very good, thoughtful host anticipating the needs of his guests.” The Molded Shell Chairs...

Handsome classic 70's Eames lounge chair and ottoman. Executed in rosewood and black leather. Cast aluminum bases, with adjustable “domes of silence” leveling glides. Extremely comfo...

Magnificent and rare 2nd generation Brazilian Rosewood and black leather lounge chair and ottoman by Charles and Ray Eames. This chair retains its super rare double ring back black ...

This is an original Iconic Eames Aluminum Group Lounge Chair designed by Charles and Ray Eames for Herman Miller in 1958. It was produced...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

The design of the Aluminum group chairs came from Girard's lament to Charles Eames that there was no well designed outdoor furniture when he was working with Eero Saarinen on the cre...

A "Cats Cradle" LAR formed fiberglass lounge chair designed by Charles & Ray Eames for Herman Miller. Circa. 1960's. Elephant Gray fiberglass shell with original metal base. No visible makers mark on this chair. 24.5 inches high. 24 inches wide...

An original 1970s Eames Lounge Chair by Charles and Ray Eames for Herman Miller. This is a particularly elegant example, dating to the mid-1970s and executed in richly figured Brazi...

The Lounge Chair and Ottoman is an iconic furniture design created by Charles and Ray Eames. It is widely regarded as one of the most significant and enduring pieces of modern furnit...

The iconic LCW (Lounge Chair Wood) design has earned its place in the most important private and public collections the world over and for good reason. Using technology they develope...

An early iconic design. The LCW designed by Charles and Ray Eames manufactured by Evans for Herman Miller. This piece is being sold in found condition with original Evans labeling...

Awesome example of the Charles and Ray Eames LAX molded fiberglass arm shell chair for Herman Miller in one of the original colors, lemon yellow. This is an early chair made by Zenit...

Charles and Ray designed the iconic "La Chaise" lounge chair for The Museum of Modern Art’s 1948 International Competition for Furniture Design. Its name references both its functio...

Iconic pair of Eames for Herman Miller LCM's in later orange and black paint finish. These chairs are structurally sound and sturdy, both have a later, but not new, orange paint surf...

Eames Lounge Chair 670 & Ottoman 671 Set by Charles & Ray Eames, Herman Miller, 1990sBlack Patinated Leather Lounge Chairs on Ash Black Plywood Shells with Exposed Birch Edge This r...

An exceptional early example Eames Lounge Chair by Charles and Ray Eames for Herman Miller, dating from the 1960s. This piece features the highly desirable feather down-filled cushi...

Eames Aluminum Group Lounge Chair and Ottoman by Herman Miller, 2008 An iconic Eames Aluminum Group Lounge Chair and Ott...

This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...

This is a massively unusual Herman Miller Eames Lounge Chair in Zebrawood, accompanied by a complimentary period-correct Eames Ottoman in Rosewood. Models 670 and 671 were initially ...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames for Herman Miller in 1956. This set dates to ca. 1958. The shells on this se...

Fantastic Eames Soft Pad lounge Chair and Ottoman with black leather. Unusual dark graphite frame makes this an unusual find. Also known as mo...

These are Eames Aluminum Group Reclining Lounge Chairs, Model EA338, originally designed by Charles and Ray Eames for Herman Miller in 1958. Th...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

This is an Eames Aluminum Group Soft Pad Lounge chair and Ottoman, model EA416 and EA423, originally designed by Charles and Ray Eames for Herman Miller in 1969. This particular set ...

For sale is a lovely set of two iconic Vitra 671 Lounge Chairs, designed by Charles and Ray Eames in 1956. The Eames’ wanted to create a spacious armchair that combines ergonomics — ...

Mid-Century Modern molded RAR rocking chair designed by Charles and Ray Eames for Herman Miller. This gorgeous midcentury rocking chair was produced 1977. An original condition. B...

With their distinctive silhouette and molded fiberglass structure, these chairs harmoniously combine form and function. They were specifically designed in the 1960s for Alexander Gir...

DCW by Charles and Ray Eames for Herman Miller in original condition. Legs attached with 5/2/4 screw configuration. Original patina.

Pair of 1970s-80s Eames Armchairs in White Leather with Ottomans - Iconic Design and Timeless Comfort A tribute to modern elegance and 20th-century design, this pair of armchairs ins...

Second generation Eames lounge chair and ottoman dating to the early 1960s, executed in rosewood with black leather upholstery. Rosewood shells display the layered plywood construct...

The Eames LCM (Lounge Chair Metal) features sheets of premium face veneer on both sides of the seat and back. The wide variety of wood available adds to the versatility and beauty of...