Rubber Chairs

Iconic Mario Botta Prima chair by Alias, 1982, Italy. Black and light grey enameled steel, dark grey polyurethane foam cylinder. Dimensions: 72 cm H, 57 cm D, 48 cm W, seat height: 4...

Gaetano Pesce limited edition Greene Street chair for Vitra Italy / Switzerland, 1984 / 1994. This example 70 /100 pieces produced. Materials: resin reinforced with fiberglass, stee...

Jean Prouvé (1901–1984) was a pioneering French designer and engineer celebrated for his innovative approach to furniture and architecture, blending industrial techniques with elegan...

An incredible and very rare rocking chair (has been attributed to Gio Ponti in the past and shows a strong and striking resemblance to his designs) in walnut, rubber and fabric for C...

"NON" chair 2000 designed by Boris Berlin and Poul Christiansen, Sweden. The rubber chair is an archetype for a chair, not a designed chair, just a chair. NON is to be used anywhere you choose to use it. Steel frame encased in 100% PUR rubber. Signed "Non Designed by Komplot 2000 Boris Berlin & Poul Christiansen for Källemo AB Sweden Special Thanks To Sven Lundh & Peter J. Lassen to Weather Forecast...

Charles and Ray Eames designed low lounge armshell with X-base. Original zinc base, original screws, Original boot glides. Early transitional parchment fiberglass shell with large sh...

A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...

Very rare George Nelson desk chair, freshly reupholstered in a crimson Knoll Classic boucle.

Set of nine Selene stackable chairs in red polyester reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Heller in 2002. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...

A stainless steel dentist’s armchair with a lamp. A reclining backrest, adjustable armrests, and adjustable headrest. Produced from A.S. Aloe Company, St. Louis, MO USA, circa 1920.

The Adri Chair is a unique take on a statement chair that brings timeless materials together in a new way. The Chair is made using two stone slabs, connecte...

Gaetano Pesce ‘Broadway’ chair produced by Bernini with four rubber-capped feet standing on springs.

3 Faux bamboo patio chair made of thick casted aluminium with thick rubber strap in very good condition . Prime quality material , well made sturdy contruction with fine detail...

Designed by Italian architect Gaetano Pesce and produced by Vitra in 1984, the Greene Street Chair is a striking example of postmodern design. Named after Pesce’s New York studio, ea...

Limited Edition made in 2009 of the iconic Arne Jacobsen series 7 chair. To pay tribute to this design, Fritz Hansen choose 7 designers from the young generation to pick out their fa...

Post-modern Maurizio Peregalli and Sergio Calatroni chair, edited by Zeus circa 1985, Italy. Poltrona model. Black powder-coated square steel tube, bl...

Iconic LCM lounge chair designed by Charles and Ray Eames for Herman Miller. Beautifully bent seat and backrest. Chrome base with shock-mounts in exce...

Set of four original 60's chairs, production and design by umberto mascagni solid wood structure with sand-colored eco-leather upholstery, aluminum finishes, black rubber feet ...

A rare Italian contemporary "543 Broadway" chair with a matching ottoman in red and yellow moulded resin seat and back, patinated steel base and feet in plastic with springs by Geata...

The Adri Chair is a unique take on a statement chair that brings timeless materials together in a new way. The Chair is made using two marble slabs, connected with brass hardware and elegant details to hold the recycled rubber...

Organic vintage and authentic eight dining chairs or chairs from rattan and metal by Gian Franco Legler 1950s. A fabulous rare and authentic eight ( 8 ) dining chairs or easy chairs...

Splendid garden or bar armchair, original from the 1950s, made of scooby doo on a coated iron structure, with ergonomic armrests measures one meter high,...

The Adri Chair is a unique take on a statement chair that brings timeless materials together in a new way. The Chair is made using two marble slabs, c...

The Adri Chair is a unique take on a statement chair that brings timeless materials together in a new way. The Chair is made using two marble slabs, connected with brass hardware and elegant details to hold the recycled rubber...

Rare pair of foldable theatre chairs designed by Poul Henningsen in 1957 for the renovation of the Betty Nansen Theatre (earlier The Young Theatre) in Copenhagen and made by Andreas Christensen...

Introducing the 'Décade' chair by Design Frères, the perfect blend of French 60's style and contemporary comfort. Crafted with meticulous attention to detail, this chair features a h...

Designed by the famous Italian architect Marco Zanuso and Richard Sapper nel 1959, the chair has an absolutely futuristic shape for the times which it was made. The "Lambda" was desi...

Mid Century Modern vintage authentic three dining chairs or chairs with armrests from rattan and metal by Gian Franco Legler 1950s Switzerland. A fabulous and rare set of three chairs with armrests with a very comfortable seat shell from fine weaved rattan and black lacquered feet with rubbers. This design icon by Gian Franco Legler was designed in 1951 for an Italian restaurant...

Defined by a wide seat with slightly curved backrest for an enveloping furnishing element, the Inout 856 lounge chair develops around a light structure in white, grey or sage painted...

Pair of chairs mod 543 Brodway Chrome-plated steel frame with epoxy seat and back. Spring-suspended feet with rubber base. Original brand mark. Prod. Bernini, Italy, 1993 Designed b...

1950s Charles and Ray Eames DCM Dining Chairs Herman Miller, USA. These 1950s Eames DCM chairs are a classic piece of mid-century modern design that feel just as inviting today as t...

A set of four 'T-chair' dining chairs, model 3103, designed by the iconic Arne Jacobsen (1902-1971) and manufactured by Fritz Hansen in the 1960s. These chairs are an early model, di...

If the comfort and credential of being in the permanent collection of the MoMA isn’t enough, I’m sure that the fact you can turn over this chair and show the credits to your friends ...

Eames EC175-8. Very rare example of the loose cushion armchair without upholstery. Dated Oct. 1, 1978. This is an opportunity to own a very collectible piec...

The seat harks back in form to the aesthetics of mid-century bourgeois furnishings. The singular cut in the shell gives added character to a classic, composed elegance, as well as en...

Iconic pair Charles & Ray Eames DCW dining side chairs in Ash plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over...

Dining chair in black oak veneer and Sonata cream bouclé fabric. This chair combines a sturdy structure made of solid wood and MDF with black oak veneer side detailing, paired with a...

Iconic MAX fibreglass chair (Medium height / Armchair / X-base) designed by Charles and Ray Eames 1950s. First generation Zenith Plastics for Herman Miller production with rope edge ...

Set of three Ted Net folding chairs in original red enameled painted tubular metal and white rubber coated metal grid seats and backs. Designed by Niels Gammelgaard for Ikea Sweden, ...

Designed by Brazilian architect and designer Luiz Solano, the CANTO Chair is part of an ongoing investigation between structure and absence, volume and void. Made from anodized brush...

Scandinavian Modern black vintage stacking chairs dining chairs up to 10 pieces of the popular model no.3103 designed by Arne Jacobsen, 1952 a...

Nice set of 4 Italian dining chairs produced by Pizzetti, Rome in the 1950s During restoration the original manufacturers labels showed up under the old upholstery and were saved to be added on again when finished The chairs have been restored with respect with new Pirelli rubber strapping and latex interior foam as they were done original Zumirez moonbeam wool bouclé fabric by Zinc from their Malibu collection The black enameled solid steel frames have been polished and have paint loss consistent with age and use but proving the age of these chairs and adding character Upon request the frames can be repainted or powder coated A nice set of Italian chairs...

Set of 4 “Seconda” chairs designed by Italian architect and designer Mario Botta. These chairs are a vintage Alias production, circa 1980s. Chairs show well with minor wear commens...

Limited edition four-legged Broadway chair designed by Gaetano Pesce and manufactured by Bernini, Italy, 1993. The chair is made of yellow resin molded plastic. Chair has four brushe...

The stackable chair Inout 855 is characterised by an essential aesthetic enhanced by a high backrest. It develops around a light structure in white, grey or sage painted tubular alum...

AD Rubber Stool Small by Arno Declercq Dimensions: D 38 x W 63 cm x H 69 cm. Materials: Foam and rubber. Arno Declercq Belgian designer and art dealer who makes bespoke objects...

Primitive Chair designed by Newanderthal for Superego Editions. All made by hand as a sculpture in polyurethane painted with a special paint to obtain a resistant and soft effect li...

Binta Chair, Philippe Bestenheider for Moroso, 2009 Upholstered in multi-colored panels, each tonal shift highlights a different angle, giving the chairs a sense of movement and vis...

Swing rocking chair Sheepskin teak Drake by Warm Nordic Dimensions: D 91 x W 68 x H 103 cm Material: Wood, Foam, Rubber springs, French cane, Textile or leather upholstery, Oak We...

Swing rocking chair sheepskin oak drake by Warm Nordic Dimensions: D91 x W68 x H 103 cm Material: Wood, Foam, Rubber springs, French cane, Textile or leather upholstery, Oak, Sheep...

Iconic Landi aluminium stacking chair, originally designed by Hans Coray for the Swiss National Exhibition in Zurich (1938) and executed in the 1950s by P. & W. Blattmann Metallwaren...

Elegant and minimal, this set of three bar stools by Maurizio Peregalli embodies the refined industrial aesthetic that defines Italian design of the late 20th century. Designed for Z...

Set of Four 1960s 'La Fonda' chairs by Charles and Ray Eames for Herman Miller, USA. Charles and Ray Eames designed these incredible La Fond chairs at request from their friend Ale...

Early Production LCW designed by Charles Eames manufactured by Herman Miller - 1955. Chair is in very good original condition with the original black analine dye.

Iconic LCM lounge chair by Charles and Ray Eames for Herman Miller. Unique edition as it has been issued with the wood finished with red aniline dye and covered in black Mongolian la...

Extremely rare combination of wenge wood veneer and dark eggplant frame. No veneer chips. Special custom order. Chair is in very good condition. Collector's item. Maintains black med...

Pair of Warren McArthur pull-up chairs, 1930's Aluminum tubular frame with back-slats. Manufactured in Rome, New York Decal underside. We reupholstered with new Iron Cloth, a polye...

Design: Maurizio Peregalli, Noto Zeus, Milano, 1988. Square steel tube, powder-coated, seating- and backrest surface formed Polyurethan.  

Italian side chairs in the manner of the legendary Danish-born American designer Jens Risom in beechwood and round rubber seat, circa 1960s. Excellent conditions, only polished to wa...

Studio BBPR was a seminal Italian architectural and design studio founded in **1932** by four Milan‑based architects — Gian Luigi Banfi, Lodovico Barbiano di Belgiojoso, Enrico Peres...