Sheet Metal Tables

The Louise Demi Console Table has a half-moon top: a flat edge at the back that sits flush against the wall, and a curved front edge that projects into the room. Three cabriole legs ...

The Louise Demi Console Table in Smooth Antiqued White Bronze has a half-moon top on three cabriole legs, the flat back sitting against the wall, the curved front projecting 15.5 inc...

The Louise Round Table in Fine Hammered Copper is 30 inches in diameter and 30 inches tall: four cabriole legs carrying a circular top, the serpentine apron curved between them, the ...

The Rectangular Console Table is 72 inches of Medium Hammered Antiqued White Bronze metal in a parsons form: flat top, two vertical sides to the floor, no legs. The hammered texture ...

The Louise Console Table in Smooth Brass has four cabriole legs hand-carved from solid teak and encased in Smooth Brass metal from foot to apron, a serpentine apron curving between t...

The Louise Console Table in Smooth White Bronze has four hand-carved cabriole legs covered in Smooth White Bronze metal from foot to apron, a 60-inch top in the same surface, and the...

The Louise Round Table in Smooth Brass is 30 inches across and 30 inches tall, four cabriole legs carrying a circular top in Smooth Brass metal, the serpentine apron curved between t...

The Louise Card Table in Smooth White Bronze is 32 inches square on four cabriole legs, each carved from solid teak and encased in Smooth White Bronze metal from foot to apron. The s...

The Louise Dining Table in Smooth Copper has four cabriole legs hand-carved from solid teak and encased in Smooth Copper metal, a serpentine apron curving between them, and a 72-inch...

The Louise Dining Table in Smooth Copper is 72 inches wide on four cabriole legs, with a serpentine apron and a top that carries the geometric panel lines of hand-applied metal sheet...

The Louise Dining Table in Smooth Antiqued White Bronze has four cabriole legs in Smooth Antiqued White Bronze metal carrying a 72-inch top covered in the same surface, the serpentin...

The Louise Card Table in Smooth Antiqued White Bronze is four cabriole legs on a serpentine apron, carrying a 32-inch square top. All surfaces — legs, apron, top — are clad in Smooth...

The Louise Dining Table in Smooth White Bronze is 72 inches wide on four cabriole legs, with a serpentine apron and a top that carries the geometric panel lines of hand-applied metal...

The Louise Dining Table in Smooth Antiqued White Bronze seats six to eight people across 72 inches of Smooth Antiqued White Bronze metal top on four cabriole legs. The legs are hand-...

The Rectangular Console Table keeps nothing hidden. The form is three surfaces: a flat top and two vertical sides that reach the floor. The Medium Hammered Antiqued White Bronze meta...

The Rectangular Console Table in Medium Hammered Antiqued White Bronze belongs to the category of objects that are bought because of what they are, not what they hold. Three surfaces...

The Rectangular Console Table keeps nothing hidden. The form is three surfaces: a flat top and two vertical sides that reach the floor. The Medium Hammered Copper metal cladding cove...

A console table with no legs and no ornament: the Rectangular Console Table is a parsons-style form clad entirely in Medium Hammered Brass metal, with two vertical side panels that d...

The Louise Card Table is clad entirely in Smooth Copper metal: the four cabriole legs, the serpentine apron, and the 32-inch square top, all covered in a continuous Smooth Copper ski...

The Rectangular Console Table is a piece of pure architectural restraint. The form is a simple rectangular frame: two vertical side panels that extend to the floor, connected by a fl...

The Louise Console Table in Smooth Antiqued White Bronze is 60 inches wide at 18 inches deep, four cabriole legs in Smooth Antiqued White Bronze metal carrying the piece behind a sof...

The Louise Console Table in Smooth Brass is 60 inches wide, 18 deep, and 30.5 tall, entirely in Smooth Brass metal from the tips of the four cabriole legs to the geometric panel surf...

The Louise Round Table in Fine Hammered Copper is 30 inches in diameter, 30 inches tall, and entirely in Fine Hammered Copper metal. The round top sits on four cabriole legs, each ha...

The Louise Round Table in Smooth Brass is 30 inches in diameter and 30 inches tall: four cabriole legs carrying a circular top, the serpentine apron curved between them, the entire s...

The Louise Card Table is 32 inches square and clad entirely in Medium Hammered Copper metal: four cabriole legs carved from solid teak, the serpentine apron curving between them, and...

The Louise Demi Console Table in Smooth Antiqued White Bronze is a half-moon entry table: three cabriole legs, a curved front edge, a flat back that sits against the wall. All surfac...

The Rectangular Console Table in Medium Hammered Copper is a three-surface parsons form: flat top, two vertical sides, no legs, 72 inches wide and 30 tall. The Medium Hammered Copper...

The Louise Card Table in Smooth White Bronze is 32 inches square and 30 inches tall, the four cabriole legs encased in Smooth White Bronze metal from foot to apron, the serpentine ap...

The Louise Round Table in Fine Hammered Brass has four cabriole legs in Fine Hammered Brass metal, a circular top in the same Fine Hammered Brass surface, and a serpentine apron betw...

The Louise Dining Table in Smooth Copper seats six to eight people across 72 inches of Smooth Copper metal top on four cabriole legs. The legs are hand-carved from solid teak and cla...

The Louise Card Table in Medium Hammered Brass is 32 inches square on four cabriole legs, each carved from solid teak and encased in Medium Hammered Brass metal from foot to apron. T...

The Louise Round Table in Fine Hammered Antiqued White Bronze is 30 inches in diameter on four cabriole legs in Fine Hammered Antiqued White Bronze metal, the circular top covered in...

The Louise Card Table in Medium Hammered Copper has four hand-carved cabriole legs, a serpentine apron, and a 32-inch square top, all clad in Medium Hammered Copper metal. The legs a...

The Louise Console Table in Smooth Antiqued White Bronze is 60 inches wide and 18 inches deep on four cabriole legs, the Smooth Antiqued White Bronze metal covering legs, apron, and ...

The Louise Round Table in Fine Hammered Brass is 30 inches in diameter and 30 inches tall: four cabriole legs carrying a circular top, the serpentine apron curved between them, the e...

The Louise Card Table in Smooth Brass has four cabriole legs carved from solid teak and encased in Smooth Brass metal, a serpentine apron, and a 32-inch square top in the same Smooth...

The Louise Demi Console Table in Smooth Brass is 31 inches wide and 15.5 inches deep, with a half-moon top — flat back against the wall, curved front projecting into the room. Three ...

The Organic Modern Wave Credenza features a gentle sequence of carved parallel waves, shaped to create a calm, fluid texture while maintaining a strong architectural outline. The car...

The Organic Modern Wave Credenza features a gentle sequence of carved parallel waves, shaped to create a calm, fluid texture while maintaining a strong architectural outline. The car...

The Louise Console Table in Smooth Antiqued White Bronze has four cabriole legs in Smooth Antiqued White Bronze metal, a 60-inch top covered in the same surface, and the geometric pa...

The Louise Card Table in Smooth Brass is designed by Paul Mathieu and carries the full vocabulary of the Louise series in a 32-inch square form: four cabriole legs hand-carved from s...

The Rectangular Console Table is a piece of pure architectural restraint. The form is a simple rectangular frame: two vertical side panels that extend to the floor, connected by a fl...

The Louise Demi Console Table has a half-moon top: a flat edge at the back that sits flush against the wall, and a curved front edge that projects into the room. Three cabriole legs ...

The Louise Card Table has four cabriole legs hand-carved from solid teak, each S-curved from knee to foot and encased in Smooth Antiqued White Bronze metal from the base to the apron...

The Louise Card Table in Medium Hammered Brass is 32 inches square, the four cabriole legs carved from solid teak and clad in Medium Hammered Brass metal from foot to apron, the serp...

The Louise Console Table was designed by Paul Mathieu as part of the Louise series. In Smooth Copper, the four cabriole legs, the serpentine apron, and the 60-inch top are all covere...

The Louise Round Table in Smooth Brass was designed by Paul Mathieu as part of the Louise series. The table is 30 inches in diameter, 30 inches tall, four cabriole legs in Smooth Bra...

The Louise Card Table in Medium Hammered White Bronze is 32 inches square, the four cabriole legs carved from solid teak and clad in Medium Hammered White Bronze metal from foot to a...

The Louise Card Table in Smooth Copper has four cabriole legs carved from solid teak and encased in Smooth Copper metal, a serpentine apron, and a 32-inch square top in the same Smoo...

A console table with no legs and no ornament: the Rectangular Console Table is a parsons-style form clad entirely in Medium Hammered White Bronze metal, with two vertical side panels...

The Louise Dining Table in Smooth Antiqued White Bronze has four cabriole legs in Smooth Antiqued White Bronze metal, a 72-inch top in the same Smooth Antiqued White Bronze surface, ...

The Louise Demi Console Table in Smooth Antiqued White Bronze has a half-moon top, flat at the back and curved at the front, on three cabriole legs in Smooth Antiqued White Bronze me...

The Louise Card Table in Smooth Antiqued White Bronze is 32 inches square on four cabriole legs, each carved from solid teak and encased in Smooth Antiqued White Bronze metal from fo...

The Louise Card Table in Medium Hammered White Bronze is 32 inches square on four cabriole legs, each carved from solid teak and encased in Medium Hammered White Bronze metal from fo...

The Louise Demi Console Table in Smooth Copper is a demi-lune wall table designed by Paul Mathieu: half-moon top, three cabriole legs in Smooth Copper metal, serpentine apron, and a ...

The Louise Round Table in Fine Hammered Antiqued White Bronze is 30 inches in diameter and 30 inches tall: four cabriole legs carrying a circular top, the serpentine apron curved bet...

The Louise Card Table in Medium Hammered White Bronze is 32 inches square and 30 inches tall, the four cabriole legs encased in Medium Hammered White Bronze metal from foot to apron,...

Arenson studios Coffee Table Sheet Metal over Wood Inked Sgraffito Design Signed and dated Arenson Studios was a West Palm Beach Company They achieved national prominence when they w...

MATHIEU MATÉGOT - Trolley 1960 Perforated Sheet Metal H 22.44’’ W 27.56’’ D 11.42’’

Dining room sets in Louis XV Style with a set of 4 chairs & a Louis XV dining room table is designed by the renowned designer Paul Mathieu. He chose the name “Louise” when he created his more feminine version of Louis XV furniture and this elegant dining room sets. The characteristic cabriole leg, curving outward at the knee and inward towards the foot in an "S" shape was born during Louis XV period. It is during the same era that English furniture makers produced the Queen Anne and Chippendale styles. The dining room sets are inspired from the style of 18th-century French furniture which was guided by the court. When Louis XV, who reigned from 1715–74, focused royal life on the smaller salons of Versailles rather than its grand chambers, it transformed the aesthetics away from the imposing and angular furniture that characterised the style of Louis XIV. A broader focus on comfort and more delicate forms define antique Louis XV furniture dining room sets, with nature-inspired carvings, wood inlays, curved cabriole legs, asymmetrical shapes and rounded oval seat backs. The furnishings changed throughout the king’s life, as he ascended to the throne as a child and then grew to establish his own tastes. The dining room sets are made with great precision by our master craftsmen and hand carvers. This dining room set is more than just a dining room set as it is a true piece of art! Pieces like the bergère, an upholstered armchair with a wide cushion that fit the flowing dresses in fashion at the time, reflected this more informal court. Introduced at the start of Louis XV’s reign, bergère chairs in this style were deeper and broader than other chairs of the period. Louis XV tapestries and carpets tended to be floral and colourful, and design elements were borrowed from Asia. Dutch-born cabinetmaker Bernard van Risenburgh brought lacquer techniques influenced by Japan and China into his luxuriously made furniture. Along with its fine details, the furniture of the era also featured new innovations including mechanical devices. Jean François Oeben, a royal cabinetmaker, created such intricate pieces as a mechanical table for Madame de Pompadour, Louis XV’s mistress. It involved a sliding top and a writing surface that extended from its marquetry panels. During the later years of Louis XV’s reign, there was a shift from the ostentatious rocaille style, part of the exuberantly decorative Rococo movement in Europe for which designers such as Nicolas Pineau and Juste-Aurèle Meissonier are known. The style under Louis XVI would return to boxier forms, but with a neoclassical touch inspired by the ancient world. For the dining room sets the curved legs and side arms of this exceptionally elegant chair are hand carved from solid pieces of teak. Pattern makers trace and cut complex forms that will cover the chair in a skin of copper or purest silver (assayed at 96% purity, beyond sterling at 92.5%). The metal finishes will tarnish over time. Regular non-abrasive household metal polishes can be used to restore the original lustre. For the dining room sets the curved legs and side rails of this exceptionally elegant table are handcarved from solid pieces of teak. Pattern makers trace and cut complex forms that will cover the table from thick sheets of copper or silver. Once the table is joined together, it is meticulously encased in a tight-fitting skin of copper or purest silver. The silver used was assayed at 96% purity, which exceeds the minimum standard for sterling of 92.5%. Available options for the metal skins are White Bronze, Antiqued Bronze, Brass, Silver and Copper. Both silver and copper will tarnish over time. Regular non-abrasive household metal polishes can be used to restore the original finish. Dining room sets include: Set of 4 chairs Louis XV style in white bronze clad, club chair by Paul Mathieu...