Danish Plywood Chairs

Designed by Danish manufacturer DAN-FORM in 2003, The Kaarina Chair presents a seamless fusion of

Iconic, Scandinavian Modern, Series 7 stackable chairs by Arne Jacobsen for Fritz Hansen. Seats

chairs. These original chairs feature teak plywood shells and chromium-plated steel frames. The table we

Grand Prix Chairs, new upholstery by Arne Jacobsen, Denmark, 1955. These Grand Prix chairs are a

These original "Butterfly" chairs designed by Arne Jacobsen were produced during the 1960s and

1970s Arne Jacobsen for Fritz Hansen "Ant Chair"; molded plywood with teak veneer supported by

1979 Arne Jacobsen for Fritz Hansen of Denmark desk chair. Model 3117 made in Denmark. Label on

1970s Arne Jacobsen for Fritz Hansen Hammer chair; molded plywood with teak veneer supported by

Fantastic and a very rare set of eight dining chairs model 3208 designed by Arne Jacobsen for Fritz

Hee Welling 'About A Chair' lounge chair for Hay. Plywood four-legged frame with black-painted oak

The Series 7 chair, designed by Danish architect Arne Jacobsen in 1955 and produced by Fritz Hansen

Set of eight Friso Kramer chairs from the 1950s.

Savvaerk, Denmark, 1958. Model 150, also called 'Badminton' chair due to the end of the backrest and seats

Arne Jacobsen for Fritz Hansen “Mosquito” dining chair. A beautiful and rare chair from Arne

Vintage set of four chairs model 3103 or "Hammer chair" in lacquered plywood finished with back in

The Tongue chair in black painted plywood on steelpipe legs. Designed by Arne Jacobsen in 1955

Pair of armchairs, model 'Pernilla,' designed by Bruno Mathsson. Manufactured by Dux (Denmark

A set of six original Seagull chairs by Arne Jacobsen for Fritz Hansen. These graceful chairs

Seven chair, model 3207. Set of six armchairs in moulded plywood shell, with chromed tubular steel

Seven chair, model 3207. Set of six armchairs in moulded plywood shell, with chromed tubular steel

This set of six chairs was designed by Arne Jacobsen and manufactured by Fritz Hansen, Denmark in

Model 107 armchair designed by Hans Olsen and made in Denmark by Bramin Møbler. Solid beech

manufactured in 1968. The chairs are black lacquered bent plywood seat. They feature teak veneered plywood

A set of four wooden dining chairs from Denmark, circa 1970. A modern, abstract design; a seat of

The frame of each one is made from bentwood plywood and top has teak veneer. Newly upholstered

Set of 8 chairs from the 1960s in dark wood-colored molded plywood Danish. Marked Pagholz. Very

Very nice birch plywood lounge chair model 107 designed by Hans Olsen for Bramin, Denmark, 1950

Forty-five plywood stacking chairs made by Fritz Hansen in 1986. Very ingenious design and very

Very rare set of 6 plywood chairs by Herbert Hirche for Jofa Stalmobler. Made in Denmark

A plywood and steel chair by Børge Mogensen manufactured by Søborg Møbelfabrik, Denmark, 1953

Set of four beautiful chairs. Spindle back with a teak ply seat, circa 1950s. There were several

Sculptural easy chair in teak & beech designed by Maa. Ib Kofod Larsen and edited by Christensen

Mid-Century Danish lounge chair Designed by Magnus Olesen. Denmark, 1970s Plywood beech bended

) Danish modern bent teak chairs over gold steel legs and rubber stabilizers. Unknown maker, circa 1960.

chairs. These original chairs feature teak plywood shells and chromium-plated steel frames. The table we

The bent teak plywood ‘Hammer’ children’s chair was designed by Arne Jacobsen for Fritz Hansen

Unusual pair of lounge chairs with matching ottoman in black dyed plywood designed by Illum

Prototype stacked enameled birch chair by Peter Qvist for PQL Studio circa mid 1990's. This unusual

Seldom seen pair of bent teak plywood chairs from 1966. Label intact. Very good original condition

early 1950s by Søborg Møbelfabrik, Denmark. It is made from molded teak plywood and a beautifully curved

Fantastic puzzle piece lounge chair designed by Arne Jacobsen for Fritz Hansen, Denmark, 1960. This

Vintage Mid-Century Modern Hans Wegner Style Bent Plywood 3 Leg Shell Chairs - Pair These chairs

Hans Wegner molded walnut plywood shell chair model CH07. Design dates to 1963, reintroduced in the

About the GUBI lounge chair: One of GUBI's most innovative products, the GUBI lounge chair, is

Pair of chairs with chrome-plated tubular steel frame. Seat and backrest made of molded oak plywood

Pair of sculptural easy chairs in teak & beech designed by Maa. Ib Kofod Larsen and edited by

Nice plywood side chair designed by Verner Panton. This is for model Pantonic 5000 which was

, Denmark. There are very few of the original chairs in existence today due to matters of cost and their

frames, bent plywood teak and mahogany infill. A rare and comfortable lounge chair that was featured in

A nice set of bent teak plywood dining chairs attributed to Børge Mogensen for Fredericia. The

A set of four dining chairs manufactured by Duba Møbelindustri featuring tubular legs and armrest

This Iconic Scandinavian Modern Pair of Dining Chairs were designed by Arne Jacobsen in the 1950s

A rare and beautiful midcentury stackable chair with dark brown plywood shell on a chromed tubular

. Leidersdorffsen A/S, Denmark, 1965. These chairs are made of solid aluminium slipper frames, with black lacquered

Great oak plywood stacking chairs with an enameled grey steel frame. Minimalist design with no

'Ax Chair' by Peter Hvidt & Orla Mølgaard Nielsen for Fritz Hansen from Denmark the 1950s. The

Brutalism. 6 molded plywood & solid pine chairs with flaming drawings manufactured by 'Getama' in the

Bring home the authentic mid-century modern Danish furniture that has become the envy of the design world with this exquisite set of original Hans Wegner CH-23 oak & rattan dining ch...

Amuneal's Brass Pantry Cabinetry, part of our metal Kitchen Collection, is designed as a feature element for any space. The three doors on the upper cabinets are fabricated with a kn...

Royal House Antiques Royal House Antiques is delighted to offer for sale this lovely very rare and collectable suite of eight original William Morris, Philip Webb, Rush seat Sussex ...

Suitable as a wall light or ceiling light in both residential and commercial projects, the Aurelia Surface Sconce is defined by its distinctive bell-shaped translucent body, and much...

Chic dry bar made by the noted furniture maker, Habersham, circa 1990's. The cabinet features two doors each having leaded glass doors, which open to reveal a glass shelf, a lighted ...

Adrian Pearsall for Craft Associates, lounge chair with ottoman, model 1717-RC and 1841-O, fabric by Pierre Frey, walnut, brass, United States, 1960s The Havana set, designed by Ad...

William Birch of High Wycombe. Liberty & Co retailer. A pair of Arts & Crafts rush seat oak dining or side chairs with a wide curved headrest and ring turned legs and front stretche...

Custom Trastero cabinet in oakwood with heavy distress. Available in a variety of finishes. Custom sizes. Interior can be set up as a wardrobe or with shelves. As shown in open grain...

Classic rocking chair by Ulrich Böhme for Thonet. Designed in 1971, model S826. Frame made of chrome-plated tubular steel. The rocking chair has been reupholstered and covered with a...

Afra & Tobia Scarpa for Benetton Office, folding stool or ottoman, leather, steel, Italy, 1985. This stool is designed for the office of the clothing brand Benetton by Afra & Tobia ...

Exceptionally rare 1970s lounge chair in ash and canvas made by Zanotta. The chair is very solid and disassembles completely when desired. In wonderful vintage condition. All leather...

A spectacular 1970s Dining Set- The chairs and table have a heavy chromed steel base and were reupholstered in soft blue leather. Glass dimensions: 130 cm Chair dimensions: Width: 51...

Super rare lounge chair designed by Luigi Colani, manufactured by BASF Germany, 1970. From this lounge chair only 10 examples are produced by BASF in the 1970s. The Neue Sammlung Mus...

A classic desk chair designed by Pierre Jeanneret, originally created for the iconic Chandigarh project in India during the 1960s. Crafted from solid teak, this chair features Jeanne...

One-of-a-kind modular oak & plexiglass shelf unit, Finland, 1960s. Unknown maker but as far as we know, it is a proto model and never made it in production. Consisting of two separa...

Gorgeous pair of Pierre Jeanneret office chairs designed in the 1950s. These chairs have a floating back and V-leg frame. Pictures show that these chairs are stenciled on the back w...