West Virginia - Tables

71.75" diameter x 29.125" tall. Monumental Dining Table is Radial Sunburst walnut. Created by Aaron Saxton using select flamed walnut from a unique log obtained where the patterns ar...

Monumental 10 seater Dining Table 53.5" x 94.5" x 30.25" tall. A single photo has been added to this listing April 7 showing a new base we prod...

New images and video added 23 Jan 2026. Coffee Table 36x54x16" tall. May be reduced to 15.25" if required, This model is the prototype and was produced for a series we are releasing ...

Dining Table 47x84x30" tall. Introducing the Emergence Collection of dining, coffee tables & other pieces. Taking the techniques utilized in production of radial designs for my e...

Set of 2. 15" deep, 20.25" tall and 26" wide. Entirely refinished and not a single mark to be found anywhere except on the side of one table. Entirely refinished in a conversion varn...

38" wide x 16" tall, large walnut coffee table. John Van Korea for Drexel. This table has been refinished but maintains two flaws (photographed and shown in video), otherwise excelle...

1966 Knoll Coffee Table 35.75" x 14.765" with custom genuine Ebony wood applied in 2025 by Aaron Saxton. The ebony is flawless, the highest grade and uncomm...

29.5 inches high by 81 inches long by 42.5 wide. Seats 6-8. Parsons form dining table by Mastercraft of Grand Rapids clad in brass sheet with brass edge trim and bevelled glass inser...

Monumental 10 seater Dining Table 53.5" x 94.5" x 30.25" tall. A singular ellipse table produced in bold, dramatic and imposing South American Santos Rosewood with complex symmetry ...

The Emergence collection released January 2026 by Aaron Saxton, designed and built in the USA. As shown 54x36x15 3/8" tall. There is a separate listing for the walnut model, while th...

28.25 tall x 59 Diameter. Sunburst radial walnut table top created by Aaron Saxton 2026 and attached to an original cast iron pedestal base by Eero Saarinen for Knoll circa 1956. Hea...

Emergence Collection released January 2026 by Aaron Saxton, designed and built in the USA. As shown 27.5 tall x 36.5 x 22.25" available in heights 14" up to 48" for use as coffee, en...

95 x 54 x 30 oval Dining Table designed and produced by Aaron Saxton in the United States. Hand-crafted in my studio in Appalachia using various woods, and in this instance Santos Ro...

Iconic large table by Knoll, designed by Eero Saarinen. 54" diameter and easily seats 8 persons but 6 will feel very spacious. 28.5" tall. This table has the original cast iron bases...

Dining Table 47x84x28.75" tall. A singular ellipse table produced for the launch of our new series the Emergence Collection of tables and furniture just released. This is one of two ...

Dining Table 47.5x78x30" tall. Introducing the Emergence Collection series of dining, coffee tables. Taking the techniques utilized in production of radial designs for our entrance d...

Solid surfboard stylized edges and magazine rack shelf. Features raised edges typical of Danish modern production, but American produced. Ideal for use as coffee or end table. In ex...

Produced 2010 and never used for the facility. In pristine condition with a few scuffs to feet and otherwise flawless. 36" wide 29" tall with matching black adjustable feet. Cherry laminate, rubber edge and black painted contract base...

A bespoke, one of a kind, custom table designed and built by History Never Repeat's master craftsman A. Saxton in the United States. A commanding, yet elegant table that will anchor ...

Coffee Table base for use with or without glass. 18" diameter x 15 3/4" tall. Produced from genuine walnut, use as a stool, ottoman, coffee table or coffee table base (add glass up t...

Sale jan-march 2026. Model 502-4 by Milo Baughman for Drexel Perspective in Mindoro Wood 1952. 66" wide, 29.75" tall and 44" deep. Width reduces to only 27" when leafs are dropped and is not an extension table Bold, with angled edges and built in...

54" diameter (170" circumference round for seating 6-8), 28.75" tall. Knoll by Eero Saarinen. Original production 1950's Steel Cast Base. Modified in 2025 by us with a Macassar Ebo...

71.75 x 41.75 x 27 7/8". Table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, This model produced 1980. Laminate combed oak top. Signed to underside. Fea...

Previously the property of the Osolnik family. 41.5" diameter and 18" tall. An important artist, who seldom produced furniture. This example by Osolnik is representative of the fines...

Hand-crafted by Aaron Saxton. 30.25" tall, 46.5" deep and 83.75" wide oval upon a pedestal base. This is a singular example is produced in red oak which deviates from the typical woo...

Exquisite and detailed with tapered features abound. Barney Flagg for Drexel, 1962 in Walnut and in exceptional original condition. Delicate balls suspend the table and the book matc...

Multipurpose Furniture. We do not know exactly what this is. It could be a display table being 17.5" tall or it could be a seating arrangement with tables. Or it could be a cocktail table or merchandise display table. The smaller black laminate tops are 12" and the larger rosewood laminate tops are 17.75". It is overall 29" deep and 59.25" wide. It was purchased years ago from a family who owned a Lightolier store and had all the built-ins and seating done by Harvey Probber, and given the construction, it would be consistent. Especially the rubber feet at each stem is very much seen on Harvey Probber pieces. If you are seeking a unique piece, perhaps something to compliment a George Nelson Marshmallow sofa...

28 x 28 x 20 tall. Thomasville, circa 1965. Walnut and Fruitwood. Delicate and appealing this table was produced by Thomasville in 1965 and features walnut and fruit wood in an eleg...

71 5/8 x 35 5/8 x 28.75". Lehigh Leopold circa 1970. May be used as a conference table or executive desk. An exceptional piece of furniture, over engineered and industrial strengt...

Dining Table 47x84x28.25" tall. A singular ellipse table produced for the launch of our new series the Emergence Collection of tables and furniture. Produced in South American Rosewo...

Emergence Collection released January 2026 by Aaron Saxton, designed and built in the USA. As shown 47x84x30" tall with ovals available up to 120" in length and 60" in depth. See var...

Dining Table 59" Diameter x 29.5" tall. A singular round table produced for the launch of our new series the Emergence Collection of tables and furniture. Produced in walnut and fea...

Iconic large table by Knoll, designed by Eero Saarinen. 54" diameter and easily seats 8 persons but 6 will feel very spacious. 28.5" tall. This table has the original cast iron bases...

Pair of gilded carved wood corner console tables with original marble tops

Metal coffee table with glass top designed by Francois Monnet French, 1950 Special Instructions for shipping: here is how pieces that has a built in glass should be crated. Red area...

Streamline Moderne iconic design by Karl Emanuel Martin (K.E.M.) Weber designed in 1935 and manufactured '35-37 by Lloyd Manufacturing. Comes with rare provenance - a copy of original receipt from July 1935. Measures: 28.75" wide, 16.5" deep and 19.75" tall. Tubular steel with chrome plating. Table top has had the lacquer buffed and a seal coat...

End Table base for use with or without glass. 18" diameter x 20" tall. Produced from genuine walnut, use as a stool, ottoman, coffee table or coffee table base (add glass up to 48" i...

The Emergence collection released January 2026 by Aaron Saxton, designed and built in the USA. As shown 20" tall x 18" diameter and available in heights 14" up to 48" for use as coff...

Special Base as shown 27.5" tall, 36.54" wide and 22.25" deep. This is available as shown for immediate shipping. Produced for the Emergence Collection being released Jan 2026 as a p...

Painted Wrought Iron Garden Set. No Top Four Chairs Chairs: H 39.25" x SH 19" x W18" x D 17.25

Maker unknown, but likely an American of Martinsville cocktail table from the late 1950s. Features inserted teak wood to tabletop area. Finished with new black lacquer and clear lacq...

Lane, alta-vista Walnut Two-tier 29" x 23", 20.5" tall. Exceptional construction and style has been employed by Lane to produce this excellent side table. Featuring solid lumber us...

Paul McCobb Delineator for Lane End or Lamp Table. This is an uncommon table and has been restored with a specialist finish designed to avoid damage from spills of alcohol, water or hot beverages so can be used with peace of mind. In lovely condition with only a few minute blemishes remaining. Satin Finish. Walnut is glowing, the drawer...

Unique table produced by Planner Group with Genuine vintage (not later re-issued pattern) formica top design "skylark" by Raymond Loewy and Brooks Stevens...

24" square, 22" tall. Fine Black walnut, refinished with lacquer. Minor marks exist to legs. Very good condition. For use as sofa, end or side table. Possibly could be used as a beds...

Dunbar, Edward Wormley, USA, Model 4478 table, New World Group, Enduring Modern collection Series. Linen White Lacquer over mahogany circa 1949, 30 1/8" deep and wide. 24 7/8" tall....

46.5" x 83.75" and 29" inch tall. Original pedestal cast iron base from the period 1955-1965 from Knoll reconditioned and like new. These original knoll bases are wider and heavier t...

Pale white/grey Gustavian table with one drawer and sculptured legs and sides. Distance from the floor to the bottom of the apron is 23"

A modern rectangular dining table with black travertine base and glass top.

French wrought iron table bases with a beautiful original aged carrara marble tops . Nice weathered patina. Perfect for indoor or outdoor use. Solid and sturdy. These pieces would...

An exceptionally grand and very large and versatile Napoleon III mahogany table that could serve as a conference or dining room table. It comes with a base, four middle section exten...

Two sets of four chairs and two tables of this interesting wrought iron table with matching chairs painted in white enamel. 1970 Industrial modern design. Great for a card table or...