Rubber Seating

Pair of Warren McArthur Style No. 1018 chaises, produced by Namco Ltd. in Australia during the early 1950s under license from the Warren McArthur Corporation. These rare post-war exa...

Warren McArthur Industrial Design Side Chair with Sling Back, c. 1935 Aluminum, Rubber Feet and Upholstery (cotton-poly blend) A rare example of early American industrial design by W...

Brand: Classicon Model: Limited Edition Bibendum Armchair Design: Eileen Gray, 1926 A design that combines sculpture, cultural history, and a touch of humor. Eileen Gray's Bibendum...

Rare pair of bar stools / drafting stools with armless yellow fiberglass bucket / shell chair seats designed by Charles and Ray Eames on bases designed by George Nelson. Both have ad...

Superb and exclusive pair of two seat Mohair Velvet 'CALIFORNIA' sofas freshly reupholstered with Italian luxury Mohair Velvet fabric from Dedar Milano with inset stainless steel bases by Parisian high society designer Jacques Charpentier. This plush mohair pile...

Stunning pair of Italian 1950's Lounge Chairs Walnut & Mohair Velvet & Brass hardware This pair of lounge chairs have been completely to bare-bone and restored with new interior Pir...

This is an Eames Aluminum Group Executive Desk Chair, Model EA337, originally designed by Charles and Ray Eames in 1958. These particular examples were produced by Herman Miller and ...

1st Edition C&B, Italy 1971 — Single Module from the “Gli Scacchi” Series
Designed by Mario Bellini This rare first-edition piece, produced by C&B Italia in 1971, comes from the cel...

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...

Set of modular armchairs and poufs in brown corduroy, mod. Camaleonda designed by Mario Bellini for C&B Italia in 1970. The set consists of 5 elements: - 3 armchairs ( cm 71h x...

Anna Anselmi for Bieffeplast with white enameled metal tubular frames with Black rubber backrest. Foam cushions. Labeled Bieffeplast, Padova, Italy label on the underside. (2) Avail...

This is an Eames Aluminum Group Soft Pad Management Desk Chair, Model EA435, originally designed by Charles and Ray Eames for Herman Miller in 1969. These examples date to the year 1...

Splendid garden or bar armchair, original from the 1950s, made of scooby doo on a coated iron structure, with ergonomic armrests measures one meter high,...

Iconic LCM lounge chair designed by Charles and Ray Eames for Herman Miller. Beautifully bent seat and backrest. Chrome base with shock-mounts in exce...

Set of modular armchairs and poufs in brown corduroy, mod. Camaleonda designed by Mario Bellini for C&B Italia in 1970. The set consists of 8 elements: - 5 armchairs (cm 71H x 65...

This is an uncommon steel grid Chaise Lounge, Model 715, designed by Richard Schultz for Knoll Associates in 1963. The geometrically welded-wire frame is powder coated in a matte whi...

ABCD loveseat by Pierre Paulin for Artifort, 1968. Loveseat has been carefully restored by stripping down to bare metal frame and latex seat sling, re foaming and re upholstering in ...

René Herbst, 'Sandows' chair, model N.5, plated steel, elastic rope, France, design 1928, produced 2000's. The 'Sandows' chair epitomizes the industrial advancements of the twenties...

The iconic LCW (Lounge Chair Wood) design has earned its place in the most important private and public collections the world over and for good reason. Using technology they develope...

Raro set di 2 poltrone di produzione italiana, anni 70. Struttura in gommapiuma sagomata, rivestimento in lana, anelli perimetrali in metallo cromato, Questo raro set di poltrone d...

Pair of Alky Armchairs by Giancarlo Piretti for Castelli. Produced by Anonima Castelli in 1972. Base in brushed steel, padding in foam rubber, cover...

Cool post-modern Model 4855 armchair chair by Anna Castelli for Kartell, circa 1990s. The cockpit shaped structure has curved armrests with a round midsection and detachable section...

This rare early production collectors piece is a circa 1969 'Molar' settee by Wendell Castle (American, 1932-2018) made from gel-coated white fiberglass with molded white rubber foot...

Tubular steel frame in red lacquer with black foam back support and beige seat cushion by Amisco, Canada.

Unique and out of production functional seating elements by Belgian designers Serge Haelterman and Steven Brouns. These elements are made of high end foam covered with an elastic coated fabric that can be cleaned easily and feels like a latex rubber. This seating elements can be turned into a sofa, bed or seating island with your own imagination. NIKE purchased several of these JZUZ Elements for their shops in Europe Measures: Green element 82.67inch/210cm x 27.55inch/70cm x Height 27.55inch/70cm Orange element 55.12inch/140cm x 55.12inch/140cm x Height 27.55inch/70cm Orange block element 27.55inch/70cm x 27.55inch/70cm x Height 27.55inch/70cm I taken this text from Serge Haelterman's website: Right after I graduated as an Industrial designer back in 1999 I started a furniture brand together with my friend Steven Brouns. We felt there was a need for a new type of furniture that was able to adjust itself to the ever changing life situations. Hence the name Livingelements. The name JZUZ was conceived because we believed we had to spread the message of this new kind of living. The first elements were a u and a square shaped seating element. They were in fact a deconstruction of a regular sofa. This deconstruction led to a whole range of new possibilities. When combining both elements you could construct all kinds of different 'living' setups. After this followed the room devider...

An exquisite pair of Lady lounge chairs, originally designed by the renowned Marco Zanuso for Arflex, Italy in 1951. These remarkable chairs have undergone meticulous reupholstering,...

Stylish pair of post modern design chairs, made in Italy, retailed by Conrans Habitat NYC in the 1990's. Very fine, original clean and ready to use condition. Textured rubber upholst...

Pair of Armchairs mod 811 by Gio Ponti for Cassina, 1957 Made in 1957, this rare lounge chair model ‘811’ is designed by Gio Ponti for Figli di Amadeo Cassina. This armchair is defi...

This is a Barcelona Lounge Chair, originally designed by Mies van der Rohe in 1929. This particular example was produced by Knoll in the 2010s. The chair is comprised of a chrome ste...

Elegant and minimal, this set of three bar stools by Maurizio Peregalli embodies the refined industrial aesthetic that defines Italian design of the late 20th century. Designed for Z...

Modernist black lacquered steel and rubber bench by Maurizio Peregalli for Zeus, Italy, 1980s.

An Iconic Italian Mid-Century Pair of Lounge Chairs by Piero Lissoni in a sleek, contemporary, low, square form circa 1970-1975. The pieces are modular, multi-functional and will for...

A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp...

Andy Warhol 1928–1987 Brillo Box pouf by Quinze & Milan 2013 transfer-printed foam rubber 16 h × 15½ w × 15½ d in (41 × 39 × 39 cm) Designed as a collaboration between Quinze & Mila...

''Marius'' leathered armchairs by Mario Marenco for Arflex, Italy, Set of 2

Set of 2 This "IX Triennale" sofa was designed by Marco Zanuso in the 1950s and manufactured by Arflex in Italy. The pair of sofas has an metal frame and seat cushions on Pirelli str...

Wrought iron and white naugahyde "All Round Square" stool/ottoman Model #1305 designed by Paul McCobb (ca. 1960s, USA). Original condition with wear to the naugahyde from age/use (ti...

This is a Barcelona Lounge Chair, model 250LS, initially designed by Mies van der Rohe and Lilly Reich in 1929. This example was produced by Knoll in the United States in 1987. It features a solid, hand-polished stainless-steel frame (vs. the more commonly seen chrome-plated editions) and has cushions upholstered in black leather. The retail price of this chair was over double the cost of a standard chrome Barcelona chair...

"Rocking Chaine" lounge chair model, with footrest, gray lacquered metal and sheathed springs, by Jean-Marc Mouligne (1950-2007), Quart de poil Paris edition. France, 1990s.

This is a Tubular Chromed Steel and White Rubber Cantilever Stool, designed by Andre Dupre for Knoll in the 1950s. The knotted rubber cord is expertly wrapped around the steel base, ...

An unusual Warren McArthur lounge chair, a low version of Warren McArthur's standard Style No. 1132ASU, exemplifies the innovative engineering and modernist elegance that defined McA...

Designed by the famous Italian architect Marco Zanuso and Richard Sapper nel 1959, the chair has an absolutely futuristic shape for the times which it was made. The "Lambda" was desi...

80’s rubber Tread Chaise Lounge by Dema Italia, Italy. Original Measures 24.75” tall 27” wide 71” long, seat 10” tall 43” deep

Set of 4 dining or office chairs made from black mat metal structure and brown skai seat and back. Rubber feet and brass studded back/armrest. The metal structures have been repainte...

Le Bambole armchair designed by Mario Bellini for B&b Italia 1972. The Bambole series won the Compasso d'Oro award in 1979. Polyurethane structure, wool fabric, restored. Le Bambole...

Rare pair of foldable theatre chairs designed by Poul Henningsen in 1957 for the renovation of the Betty Nansen Theatre (earlier The Young Theatre) in Copenhagen and made by Andreas Christensen...

This is an Eames LCW Lounge Chair in Calico Ash Plwood, initially designed by Ray and Charles Eames in 1946. This example dates to ca. 1948. The chair measures 25 inches long, 22 ...

Nespolo Lattina armchair produced and disigned by Gugliermetto experience. Ugo Nespolo graphics. Can a simple jar become a very comfortable armchair? The answer is yes! A session tha...

Le Bambole armchair designed by Mario Bellini for B&b Italia, 1972 Polyurethane structure, bouclè cotton fabric, restored. Excellent conditions, the Bambole series won the Compasso d...

Set of two La Fonda chairs designed by Charles and Ray Eames for Herman Miller during the 1960s. The designers set to work on this model in response to a request from their friend A...

An iconic and extremely rare first-generation Eames side chair in lovely vintage condition. This fantastic chair is a treasure of design history, produ...

Pair of lounge chairs by Warren McArthur manufactured at his factory in Connecticut in the late 1930s. The designs that Warren introduced in the very beginning of his furniture making he referred to as "suspension chairs...

The Adri Chair is a unique take on a statement chair that brings timeless materials together in a new way. The Chair is made using two marble slabs, connected with brass hardware and elegant details to hold the recycled rubber...

Contemporary Fossil collection 'Bench' by Oitoproducts, Blue The FOSSIL upholstered furniture collection marks an exciting first collaboration with the talented Ukrainian product de...

Youmellow model sofa designed by Gianni Arnaudo and produced by Gugliermetto Experience, 2021s. Sofa structure in metal and wood with polyurethane padding, backrest and seat covering...

This is an Eames Aluminum Group Soft Pad Management Chair, Model EA435, initially designed by Charles and Ray Eames for Herman Miller in 1969. These particular examples date to 1992....

Shiro Kuramata (1934–1991) was one of Japan’s most innovative and influential postwar designers, known for blending minimalism with experimental materials and poetic form. Associated...

Commissioned by Etage Projects for Salon Art and Design, 2017. Lush cream sofa made of rubber EVA, by Guillermo Santoma.

Contemporary Fossil collection 'Chair' by Oitoproducts, Blue The FOSSIL upholstered furniture collection marks an exciting first collaboration with the talented Ukrainian product d...

A singular crasis between large, soft blocks reminiscent of Brutalist architecture and full, curved lines. The originality of the design is mainly due to the dialogue between the bas...