Joe Colombo 4801 Chair

An armchair, Model 4801, designed by Joe Colombo, 1963/64, for Kartell/Noviglio, three-part construction of moulded laminated wood, original white lacquer coating.

Constructed out of three interlocking pieces of molded plywood. No glue, screws or nails used! This design required two years of development prior to its production. The 4801 lounge...

Joe Colombo 4801 Bentwood Lounge Chair For Kartell

Designed in 1963 and manufactured by Kartell, Italy, Joe Colombo's iconic 4801 "interlocking" armchair consists only of three bent pressed plywood parts that are assembled without gl...

Joe Colombo designed the Model 4801 chair from three curved pieces bent beech plywood.

Joe Colombo designed the Model 4801 chair from three curved pieces bent beech plywood.

Amazing chair in original condition. The incredible design is timeless, the original painting is in excellent condition. The seat looks uncomfortable but actually its quite comfort...

"interlocking" lounge chairs designed by Joe Colombo for Kartell, Italy, 1960s Joe Colombo''s iconic 4801 armchair is designed in 1963-1964.

Striking and sculptural, this is the iconic 4801 armchair designed by Joe Colombo in 1963 and produced by Kartell, Italy. Made from just three interlocking pieces of bent plywood—ass...

An armchair, Model 4801, designed by Joe Colombo, 1963/64, for Kartell/Noviglio, three-part construction of moulded laminated wood, original white lacquer coating

Wooden armchair in white color. New paint because old paint too worn. Wear due to the time and the age of the armchair. Measures: Seat height 34cm.

Black wooden armchair. Manufactured in a limited number. Numbered 136. Wear due to time and age of the armchair. Measures: Seat height 33cm.

Joe Colombo for Kartell 4801 Lounge Chair. From original owner.

Very nice example of the Classic Colombo Interlocking Plywood 4801 for Kartell designed 1963. This example is in very good, original condition, showing only light cosmetic wear, norm...

Rare and early Kartell 4801 seat by Joe Colombo, best condition, has been professionally resprayed in original orange or red, dates from the 1960. We bought it from a private coll...

Joe Columbo, first artist, then architect, designed the Model 4801 chair from three curved pieces bent beech ply – and nothing else.

A limited number of wood 4801 chairs were produced in the 1960s, when the technologies did not exists to produce Joe Colombo's design using Kartell's material of choice.

Constructed of three interlocking pieces of molded plywood. No glue, scews or nails used ! This design required two years of development prior to its production. The 4801 lounge c...

Constructed of three interlocking pieces of molded plywood, this design required two years of development prior to its production. The 4801 lounge chair were only produced in 1963-19...

Constructed of three interlocking pieces of molded plywood, this design required two years of development prior to its production. The 4801 lounge chair were only produced in 1963-19...

Constructed out of three interlocking pieces of molded plywood. No glue, scews or nails used! This design required two years of development prior to its production. The 4801 loung...

A red lacquered sculptural Joe Colombo No. 4801 “Interlocking” chair. The body is composed of three separate pieces of molded interlocking plywood without any metal fittings.

Very rare, never seen before, this lounge chair with ottoman ! ! Original lacquered plywood, marked production number 48. so 1 of first ever made !! Constructed of three interlock...

Pressed plywood lounge chair '4801' by Joe Colombo for Kartell. Made in Italy, circa 1963-1964.

An early example of this bent ply lounge chair, they were produced for a short time from 1963/4 and all numbered, this chair is number 21 stamped on each of the three pieces that ma...

Formed of three pieces of steam-bent plywood elements, painted white, with upholstered cushions. Each numbered - 244 and 248.

An armchair featuring a body, seat and frame composed of three pieces of white bentwood. By Joe Columbo, Italy circa 1963 produced by Kartell Noviglio, Milan. Please see the book "10...

One of the 1st, small run of numbered lacquered edition of the Classic Colombo designed bent plywood chair, this one number 21!

Iconic all original 4801 lounge chair by Joe Colombo for Kartell 1960s.

This is an absolutely beautiful Postmodern sculptural upholstered accent lounge chairs, Jan Ekselius style. This Memphis Milano fitting lounge chair definitely makes that statement...

Side chair designed by Verner Panton in 1967 for Herman Miller - Fehlbaum production, Germany. This one is stamped in 1971 in black glossy thermoplastic.

Found in design collections across the world, the Cherner chair was originally made of walnut faced moulded plywood, using similar techniques to those that Charles and Ray Eames were...

Toga chair was realized in hot-press moulded black fibreglass designed by Sergio Mazza in 1968 and manufactured by Artemide, Italy. The Toga chair is part of the Albert & Victori...

Pierre Paulin's sublime sculptural sensibility is on full display with this F300 lounge chair designed in 1964 for Artifort. The one piece form in smooth fiberglass curves, folds a...

Polish production chairs from Plastics Factory 'Krywald' in Knurow have embossed signatures. They come from the 1960s. The author of this project is the Danish architect Steen Østerg...

Meander Floor Lamp, with one leather wrapped flex arm. Sculptural, textural, colorful, flexible floor lamp. Shine a light on your favorite reading material or pose as you wish to ad...

A mid century modern five piece sectional designed by Milo Baughman and made by Thayer Coggin. There are four seating sections plus additional section with white laminate top side ta...

Cappellini Cross Medicine Cabinet in Gloss White, Thomas Eriksson, Italy, 1990s. Equal parts storage solution and wall art, Thomas Eriksson's Cross by Cappellini is an unmissable ...

Tafla O4.5 contemporary mirror by Zieta. (New model created in 2020) Delivered with certificate signed by the artist: Oskar Zieta for Zieta Studio. Polished stainless steel Measure...

NON-dimmable EXTRA charge for dimmable version. Floor lamp by Eileen Gray. Chrome-plated tubular steel with black plastic lamp socket for mounting light source. Floor plate chrome...

A polished stainless steel table with safety glass top. Designed by Joe Durso for Knoll.

A true icon of modernist design, the Utrecht Sofa by Gerrit Thomas Rietveld—faithfully produced by Cassina—embodies the radical spirit of early 20th-century Dutch design. Originally ...

Large coffee table in speckled maple veneer. Comprising a large speckled maple veneer top with rounded edges. The base consists of four cylindrical semicircles, embellished at the b...

1970s Italian Mazzega table lamp by Carlo Nason in hand blown glass and chrome. chrome-plated hardware. Fully rewired with a single E26 medium based socket each lamp. Ready to be use...

This low coffee table by Karl Springer features an inlay lacquered base with a tabletop from goatskin parchment, finished with clear lacquer. Beveled edges and a plinth-like base are...

Cini Boeri for Arflex, 'Tuttoletto' queen bed, oak veneer, Italy, 1978 Exceptional piece of furniture designed by Cini Boeri for Arflex in 1978. This monumental bedroom unit present...