Softwood Sculptures

American Victorian white marble bust of gentleman with a mustach supported on a square pedestal base (signed: A. Frille Firemre) (matching lady - Inv. #060080) Base is 9.5 w d 9.5 d.

A nice hand carved knotty pine wood and brass bear sculpture by Sarreid, circa 1970s. The sculpture, which was made in Spain, is in very good cond...

Circa 1900 hand carved pine horse. This is a wonderful piece of folk art, and may have been a glorious rocking horse when it was made. The horse was painted at one time, as there a...

A very unusual, stylized sculpture of man by a Portugese sculptor Manuel Pereira da Silva. Made of pine, 1979. A note about the artist: "Manuel Pereira da Silva was born in Portelas, in 14 de Maio Street, Vila Nova de Gaia, on 7 December 1920. In October 1928, he started his education at Cabanões primary school. After he sat the 2nd level exams, at Palhacinhas school, his father enrolled him in the Faria Guimarães Industrial School (currently Soares dos Reis Artistic Secondary School), to take the joinery course. The following year, he changed to the Drawing course. After completing his secondary school studies, he enrolled in the School of Fine Arts in Porto, in 1939. Here, he studied under the supervision of Joaquim Lopes, Acácio Lino and Rodolfo Pinto Couto, and had as colleagues Arlindo Rocha, Júlio Resende, Eduardo Tavares, Isolino Vaz, Nadir Afonso and Fernando Azevedo, some of which were part of the "Grupo dos Independentes" (Group of Independents). He received two awards: the Teixeira Lopes Award and the Soares dos Reis award. His final thesis was on Nuno Álvares Pereira, and he obtained a final mark of 18 out of 20. In 1946, he left for Paris. He spent the following two years studying at the École des Beaux-Arts, shared the experience of the great masters at the Louvre, came into contact with the new artistic trends and attended open courses, where he learned, among others, the fresco mural painting technique, which was later used in the Santa Luzia Church, in Viana do CasteloIn his workshop in Afonso de Albuquerque Street, in Vila Nova de Gaia, he produced two types of works: realist sculptures, to meet the commissions he received, and more abstract and independent-type of sculptures, which can be found in many Portuguese and African cities, for instance, Viana do Castelo, Vila Nova de Gaia, Porto, Bolama, in Guinea – Bissau, and Luanda, in Angola. Baixo relevo de D. Pedro Pitões entre os Cruzados no Palácio da Justiça do PortoAmong the sculpture work he produced, we highlight the torsos of his friends Fernando de Araújo Lima, Adriano de Sá Figueiredo and Adelino Gomes; the monument to the Athlete (1973), erected in the Gândara Square, in Vila Nova de Gaia; the monument to the American general and statesman Ulysses Grant (1822-1847), in front of Bolama City Hall (1955); and the low relief work in Ançã stone, for the Audience Room of the 3rd Court Division of the Porto Court House, depicting D. Pedro Pitões near the Porto Cathedral summoning the crusaders to help Afonso Henriques in the conquest of Lisbon, dated 1961. Estátua de Ulysses Grant (1955)Manuel Pereira da Silva also produced a low relief in multi-coloured ceramics for the façade of a building in Luanda, dated 1960; the figure of the Lavrador (Farmer), in Gulpilhares; the fire-fighters in Avintes and Gondomar; the monument to the benefactor of Sandim, Fernando Couto; the monument in homage to furniture...

Beautifully stylized a set of 2 figurines with a great balance of harmony stood, portrays the beauty of the inner world through pure beauty. This Valuable unique art piece is a great...

Beautifully stylized a set of 6 figurines with a great balance of harmony stood, portrays the beauty of the inner world through pure beauty. This Valuable unique art piece is a great...

Large early 19th C carved and painted overdoor pediment . 1820

Sculpture by Swedish artist Emil Näsvall. Made from plaster standing on a pine base. done around the 1950s in Sweden. Good vintage condition with age related wear and patina. Arti...

An early 19th century French carved bantam sporting a crown, well carved in pine. Good detailing to face, plumage, tail feathers and feet. Possibly originally from a ring toss game...

Beautifully stylized a rustic man figurine with a great balance of harmony stands, portraying the inner world's beauty through pure beauty. This Valuable unique art piece is a great ...

An 18th century wooden merman sculpture dated to circa 1750. Presented on a stepped base, a male figure kneels over a dolphin with two more either side. The bearded figure holds a l...

Book Ends Wooden style acrylic Sculptures A Set Of 3 Decorative Figurines of Human Book Holders + Thinking Man Sculpture. Beautifully stylized a set of figurines...

This quite large and well executed carving is unsigned by the artist, but presumed to have been done in Eastern Europe in circa 1900 in the period Black Forest style. This large carv...

Measuring 46 in. x 46 in. x 8 in. and made entirely from reclaimed pine and mahogany spindles from a textile factory, the precise sizing and arrangement form a constellation that rew...

This antique Swedish kick sled is a charming piece of history, boasting a vibrant red frame that exudes a rustic allure. A delightful touch of folk art adorns the seat with a heart-s...

Presumed to date from the late 19th century, this life-sized Folk Art carved and hand painted study depicts a Native man dressed in traditional attire and holding a staff. The artist is unknown and this sculpture is unsigned and done in a very realistic style. The carving, likely done in Cyprus wood...

Vintage Sarreid Ltd Pine Wooden Folk Art Sculptures Man and Woman 22" Tall - a Pair. Item features a Huffman Koos label on rear. Believed to be a store display for the High End Furni...

Vintage coastal cypress knuckle sculpture. Large and free standing . Naturally formed growth of Cypress wood . Works as a organic sculpture or green house element .

Large lighted geometric abstraction sculpture / floor lamp 'obscurite' by architect / artist / designer Raphael "Pangilinan in yellow pine, mylar and LED lights. Pieces can be commis...

A beautiful 1970’s carved wood lion sculpture in the manner of Evelyn Ackerman. It’s not marked. But beautifully carved, possibly pine. Measurements: 26” wide, 7” deep and 10.5” high.

Rare Sculpture in Pine by Johnny Mattsson, 1950's Additional Information: Material: Pine Style: Mid century, Scandinavian Produced by Johnny Mattsson ...

Robert D. Harvey (b. 1927-2015 - Marshfield, MA, USA) abstract sculpture composed of cut acrylic / Lucite (both smoked and transparent) and sculpted walnut assembled to represent a c...

American walnut carved spread wing eagle perched to Flee on rectangular rocky pine plinth, Early 19th century. Eagle is 27 wide and 17 deep at base.

This very large store display was designed by Theresa Faffi, the well known French artist, for the Mac Cosmetics 'Faffi' line that was launched in ...

19th Century carved and painted wood figure of a troubadour or minstrel wearing a hat and long coat with his trousers tucked into knee-high boots and having a violin under one arm wi...

Wooden bust of a knight. A wonderful armored knight carved from lime wood. The knight is well carved with the face (with moustache) looking out of the ...

The Mangbetu people once reigned over a flourishing kingdom in northeastern Congo. Hence their traditional art flourished around the court. Their very rare figural sculptures are rem...

Pair of Spanish style carved pine life size toreadors with red capes (19th Cent)

This well executed carving is unsigned by the artist, but presumed to have been done in Eastern Europe in circa 1940 in the Black Forest style. The carving depicts a military soldier holding a 'Tommy...

This vintage folk art hand carved and polychrome painted sculpture is signed with the maker's label of the ANRI group of cavers from Italy and done in circa 1960. This carving was bought from a private estate with another one of one entitled "Old Habitant", which has the identical script on the front and back, but posted separately. These carvings were done by the master carvers of the ANRI factory who worked from a model, usually unique to them, but this one shows it is an example of a work done by the Master Quebec wood...

The Norma Table is obtained through extensive research into the properties of Yellow Pine. The table top consists of three pieces. The wood grain of every piece is directed towards t...

This vintage Folk Art hand carved and polychrome painted sculpture is missing the paper label from its base, but being attributed to the ANRI group of carvers from Italy and done in circa 1960. This carving was bought from a private estate with another one of a Lumberjack, which has the identical script on the front and back and does have the ANRI label. These carvings were done by the master carvers of the ANRI factory who worked from a model, usually unique to them, but this one shows it is an example of a work done by the Master Quebec wood...

Early 20th century section hand carved fairground octopus illuminated figure Due to the construction and metal hanging hooks on this hand carved fairground figure, we believe it wou...

Together Sculpture by Christian Friedl Unique Piece. Dimensions: D 80 x W 130 x H 122 cm. Materials: Beech, spruce. Together tell his story... More than 100 years of living in the ...

Rare sculpture designed by Kaija Aarikka. Produced in Finland. Limited edition of 300 pcs.

Sculpture / letter knife designed by Gunnar Kanevad. Made especially for Nyman & Schultz travel agency.

A Charming Collection of Painted and Carved Decoy Ducks This is a good group of 4,19th Century French Decoy Ducks, they are carved in wood and the feathers and features are painted...

American Victorian white marble bust of lady wearing a dress supported on a square pedestal base (signed: A. Frille Firemre) (matching gentleman - Inv. #060079)

Vintage XL Globe From France, Circa 1950. Unusually large model with fantastic age and patina.

Large organic wooden sculpture by Danish artist Otto Baagøe Nielsen. Made by hand from a solid piece of birch. Standing on a base made from pine and bakelite. Made ca 1960-70s. Baagø...

This sculptural chair evokes the essence of a tribal seat—or perhaps even a throne. Crafted from an eclectic mix of solid wood offcuts sourced from the workshop, each element carries...

This unique chair is constructed from natural oak boards that retain their original bark, combined with smoked oak elements for added contrast and character. The joints are reinforce...

An architectural element featuring an Acanthus leaf surrounding a face.

A beautifully stylized figurine of a thinking man with a great balance of harmony stands, portraying the beauty of the inner world through pure beauty. This Valuable unique art piece...

A fun pair of Rubik’s cube shop display models from a children’s toy shop. The pair of cubes were commissioned by a toy shop for the promotion of the famous invention by Erno Rubik. The set designed models...

Rare large sculpture bowl designed by Johnny Mattsson. Produced by Johnny Mattsson in Sweden.

Franquin/Spirou display with a tray. Publisher by Vilac 1994. Wear consistent with age and use. Collector - Comics - Belgium Measures : Base Ø 40cm TOT: 52cm H:95cm Material : S...

Sculpture / bowl designed by Johnny Mattsson. Produced by Johnny Mattsson in Sweden.

This pair of pinewood sculptures by Ineke van Zuuren presents a refined exploration of organic abstraction and material expression. Carved from solid wood, the forms rise vertically ...

Carved in Normandy, France circa 1820, this large two-piece devotional antique sculpture depicts a serene female figure in adoration. Crafted from solid pine, the antique statue show...

Sculpture designed by Johnny Mattsson. Produced by Johnny Mattsson in Sweden.

Rare and large twisted sculpture by unknown designer.

A 19th century orchestral double base case constructed from pine timber, with iron hardware and its original floral lining to the interior. A spectacular and historic piece of sculpt...

This monumental-sized sculpture by Frans Hermes, is a true modern work of art, from the1970s. It is made from solid pine wood with great patina, giving it a unique and weathered appe...

Solo is an organic sculptural work by Ineke van Zuuren, created in the 1970s and carved from solid pine. The piece is defined by fluid, continuous lines and a strong sense of materia...

Expressive wood and plaster bust of a woman, crafted in the early 20th century in the Art Nouveau style. Her head is gently tilted to the side with a contemplative, distant gaze. Ela...

Unique sculpture signed by Jörg Pietschmann Materials: Aleppo pine Measures: H 15 x W 25 x D 16 cm In Pietschmann’s sculptures, trees that for centuries were part of a landscape and...

English Country style carved stripped pine large rooster figure with saddle on rectangular base. (20th Cent)

Modern geometric sculpture model "Spiral 11008" designed by Josecho López Llorens. Made of pine wood board finished in finished in black lacquer with beta. Made in Spain. Josecho Ló...

Essence S by Rectangle Studio Dimensions: 25x25x25 cm Materials: Solid Pine, Natural Black Wood oil Kabuk is an alternative product with sculptural appearance which can be used...