How does a wind-up toy work?

How a wind-up toy works relies on a part called a torsion spring. When you turn the knob or key, tension builds up on the torsion spring. When you stop winding, the accumulated energy sets an inner gear in motion that powers the movement of the toy. Find a collection of antique and vintage wind-up toys on 1stDibs.

What are wind-up toys called?

Wind-up toys are sometimes called mechanical toys or clockwork toys. The earliest examples date back to 15th-century Germany, where Karel Grod produced a number of mechanical toys. Shop a collection of antique vintage wind-up toys on 1stDibs.

When were wind up dolls invented?

There are legends and evidence of wind-up toys and sculptures dating back to antiquity, but modern wind-up dolls were being made in large quantities by the 19th century. Shop a collection of antique wind-up toys from some of the world’s top sellers on 1stDibs.

Do I have to wind a Rolex?

No, you don’t have to wind a Rolex watch as long as you are wearing it regularly. Rolex watches feature a Perpetual rotor that collects energy from the wrist’s movement and converts it into power for the watch. Browse a collection of expertly authenticated Rolex watches from top sellers on 1stDibs.

How do you wind up a Rolex watch?

Most Rolex watches use a Perpetual rotor which means that they do not need winding if worn regularly. If you have not worn your watch in some time, you can manually wind it by unscrewing the crown to the winding position and turning it clockwise about 20 times. Make sure to screw the crown back into place after winding to reestablish its waterproof qualities. Shop a collection of authentic Rolex watches from some of the world’s top boutiques on 1stDibs.

How do I wind a Piaget watch?

To wind a Piaget watch, pull out the winding crown located on the side. Turn it clockwise until you detect resistance. For a full wind, you will normally need to twist about 20 times. On 1stDibs, find a range of Piaget watches.

What is a North Wind chair?

North Wind chairs feature a mythical figure, such as a fantasy creature or animal, carved into the top back. The chair was meant to protect a space from evil spirits. On 1stDibs, find a selection of North Wind chairs from some of the world’s top sellers.

How to wind a datejust rolex?

To wind a Rolex Datejust, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a wide selection of Rolex Datejust watches on 1stDibs.

How do I wind a Rolex Datejust?

To begin to wind a Rolex Datejust, unscrew the winding crown fully. Then, turn the crown in a clockwise direction at least 25 times for a partial winding. Because the watch self-winds as you move, you usually only need to wind a Rolex Datejust before the first wear or if you let several days pass between wears. You’ll find a large selection of Rolex Datejust watches on 1stDibs.

What is a Gone With the Wind lamp?

Gone With the Wind lamps are chamber or hurricane lamps. They are characterized by their hand-painted globes with decorative floral motifs. Shop a collection of antique Gone With the Wind lamps from some of the world’s top boutiques on 1stDibs.

How do I wind a Rolex watch?

To wind a Rolex watch, first fully unscrew the winding crown. Once it is in a raised position, carefully turn the crown clockwise. Most watches require 25 turns for enough winding to begin powering the watch. The instructions included with Rolex watches provide more information about how to wind specific models. Shop a large collection of Rolex watches on 1stDibs.

How do I wind a Rolex Oyster?

To wind a Rolex Oyster, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a selection of well-vetted Rolex Oyster watches on 1stDibs.

How do you wind an Elliott clock?

To wind an Elliott clock, first, find the slot in the back. Insert the key or crank and turn until the winding mechanism doesn't move anymore. Avoid forcing the mechanism any further to prevent damage. On 1stDibs, shop a range of clocks from some of the world's top sellers.

How do I wind a banjo clock?

To wind a banjo clock, insert the key into the winding point. Turn the key in a clockwise fashion until the winding mechanism disengages. If you no longer have the winding key, see an experienced clock repair shop for assistance. You'll find a variety of banjo clocks on 1stDibs.

How do I wind a vintage Omega watch?

Wind a vintage Omega watch by twisting the crown at the side in a clockwise direction. Stop winding once you feel the movement of the crown stop. Browse a range of authenticated vintage and contemporary Omega watches from top sellers on 1stDibs.

How do I wind an Ansonia mantel clock?

To wind an Ansonia mantel clock, first insert the key into the center winding point, usually found on the back. Then, turn the key clockwise until the winder no longer turns. Repeat the process in the right winding point to set the quarter-hour charm and the left winding point to set the hour strike. You'll find a range of Ansonia clocks on 1stDibs.

How do I wind a Vacheron Constantin watch?

To wind a Vacheron Constantin, turn the winding crown clockwise until you sense some resistance. Typically, manual-winding watches require daily winding. You usually won't have to wind a self-winding timepiece unless you do not wear it for a day or two. Shop a range of Vacheron Constantin watches on 1stDibs.

How do I manually wind a Patek Philippe?

To manually wind your Patek Philippe watch, locate the crown and rotate it clockwise 30 to 40 times. Stop as soon as you feel resistance to avoid overwinding — this is important, as overwinding can potentially damage your watch. Find an assortment of vintage manual Patek Philippe watches on 1stDibs.

What is a key wind pocket watch?

A key-wind pocket watch is a type of portable timepiece produced from the early 19th century through the middle of the 19th century. It features a mechanism that requires regular winding with a device called a winding key. Shop a range of key-wind pocket watches on 1stDibs.

How often should I have to wind my Patek Philippe?

How often you need to wind your Patek Philippe watches depends on what type of movement system it has. Normally, you’ll need to wind a mechanically wound watch every morning before you put it on. Self-winding watches receive power from your movements. Unless you don't wear your watch for a period of 36 to 48 hours or more, you should only need to wind it once before you slip it on for the first time. Explore a wide range of Patek Philippe watches on 1stDibs.

What is considered an antique toy?

Generally, an antique toy is any toy made over 100 years ago. A toy made more than 20 years ago is vintage. Shop an assortment of toys on 1stDibs.

What is the most valuable vintage toy?

Some of the most valuable old toys include Vintage Sky Dancers, Yu-Gi-Oh! Cards, and Original Furby dolls. Some action figures can be worth around $700 today.

How old are key-wind pocket watches?

How old key-wind pocket watches are varies greatly. Watchmakers used key-wind mechanisms in pocket watches starting in the 16th century and continued the practice until the mid 19th century. You can find a collection of key-wind pocket watches on 1stDibs.

Wind Up Toy

Antique Airplane Propeller

Tin Carousel

Vintage Porcelain Dolls

Disney Tin

Category

Mid-20th Century European Toys

Materials

Metal

Vintage Toy, Wind Up Toy Musical Carousel, 1950s

No Reserve

H 7.29 in W 4.34 in D 4.34 in

Animal Wind-up toy dog with spin tail, 1950s

Located in Delft, NL

Animal Wind-up toy dog with spin tail, 1950s A wind-up animal toy, colored yellow with brown

Category

Mid-20th Century European Toys and Dolls

Materials

Mohair, Straw

Animal Wind-up toy dog with spin tail, 1950s

H 3.55 in W 5.71 in D 2.96 in

Vintage Wind-Up Toy, Circa 1950 "Smiling Boy Polishing Boots" Rare

Located in Incline Village, NV

. To operate: hold the toy in the left hand with thumb on chest and then; wind up attached original key

Category

Vintage 1950s Japanese Folk Art Toys

Materials

Composition, Tin

Vintage Wind-Up Toy, Circa 1950 "Smiling Boy Polishing Boots" Rare

H 7 in W 3.5 in D 3.5 in

Vintage "Masuyama" Lehman Wind-Up Toy. German, Circa 1913 Rare

By E.P. Lehman Co.

Located in Incline Village, NV

Early 1900's German hand painted and lithographed tin wind-up toy, by premier tin and whimsical

Category

Vintage 1910s German Folk Art Toys and Dolls

Materials

Tin

Vintage "Masuyama" Lehman Wind-Up Toy. German, Circa 1913 Rare

H 5.75 in W 3 in D 8 in

"Boy Riding a Turtle" Wind-Up Toy; by J. Chein, circa 1930s

By J. Chein & Co.

Located in Incline Village, NV

By J. Chein, circa 1930, this tin lithographed and hand painted American tin wind-up toy is all

Category

Vintage 1930s American Folk Art Toys

Materials

Tin

"Boy Riding a Turtle" Wind-Up Toy; by J. Chein, circa 1930s

H 4 in W 4.5 in D 8 in

Vintage Tin Wind Up Toy by Lindstrom, "Dancing Katinka" American, Circa 1930

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

Antique toys like this (wind ups) are difficult to find in outstanding operating condition as this

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind Up Toy by Lindstrom, "Dancing Katinka" American, Circa 1930

H 8 in W 3 in D 3 in

Marx Toys Cowboy in Jeep Tin Lithograph Wind-Up Toy

By Marx Toy Co.

Located in Fulton, CA

1950's Marx Toys tin lithograph and plastic wind-up Jeep with Cowboy driver. Notice cowboy boots

Category

Mid-20th Century American Toys and Dolls

Materials

Tin

Marx Toys Cowboy in Jeep Tin Lithograph Wind-Up Toy

H 6.5 in W 6 in D 3.75 in

"Komikal Kop" Tin Wind-Up Toy by Louis Marx Co., circa 1930

By Louis Marx and Company

Located in Incline Village, NV

on the running board of the auto. The tin lithographed and hand painted wind-up toy by the Louis Marx

Category

Vintage 1930s Folk Art Toys

Materials

Tin

"Komikal Kop" Tin Wind-Up Toy by Louis Marx Co., circa 1930

H 6.5 in W 3 in D 8 in

Vintage Pre-War Wind-Up Toy "Boy on Motorcycle Delivery Truck" by Marx

By Louis Marx and Company

Located in Incline Village, NV

This brightly lithographed tin wind-up toy in colors of red, yellow, and blue, with a driver

Category

Vintage 1930s Folk Art Toys

Materials

Tin

Vintage Pre-War Wind-Up Toy "Boy on Motorcycle Delivery Truck" by Marx

H 5.75 in W 5.38 in D 9.88 in

"Kadi" Pre-war Wind-Up Toy by Lehman Company. Germany Circa 1905

By E.P. Lehman Co.

Located in Incline Village, NV

smoother and better made than those examples seen in later wind up toy manufacturing. The "Kadi" Lehman

Category

Antique Early 1900s German Folk Art Toys and Dolls

Materials

Tin

"Kadi" Pre-war Wind-Up Toy by Lehman Company. Germany Circa 1905

H 5.5 in W 2.5 in D 7.25 in

Vintage Tin Wind Up Toy "Boy Skier" by J. Chein & Co. American Circa 1950

By J. Chein & Co.

Located in Incline Village, NV

Very nice condition all tin, vintage wind up toy by J. Chein Company, New York City, circa 1950

Category

Vintage 1950s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind Up Toy "Boy Skier" by J. Chein & Co. American Circa 1950

H 5.25 in W 3.13 in D 7.75 in

Walt Disney Enterprises "Pinocchio" Wind-Up Toy by Marx Toy Co., N.Y. Dated 1939

By Louis Marx and Company

Located in Incline Village, NV

(labeled---see image) vintage wind-up toy of the iconic Disney character "Pinocchio", dated "1939". Clearly

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Walt Disney Enterprises "Pinocchio" Wind-Up Toy by Marx Toy Co., N.Y. Dated 1939

H 8.5 in W 3 in D 3 in

"Drummer Boy" Tin-wind-up Toy by Louis Marx, New York City, circa 1940's

By Louis Marx and Company

Located in Incline Village, NV

This 1940's "Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on the

Category

Vintage 1940s American Folk Art Toys and Dolls

Materials

Tin

"Drummer Boy" Tin-wind-up Toy by Louis Marx, New York City, circa 1940's

H 9 in W 3.13 in D 3.5 in

German Tinplate Clockwork Wind Up Toy by the Lehman Co. "Balky Mule" Circa 1909

By E.P. Lehman Co.

Located in Incline Village, NV

" by Jurgen & Marianne Cieslik, published in 1982. To operate the toy; wind up the attached clockwork

Category

Antique Early 1900s German Folk Art Toys and Dolls

Materials

Tin

German Tinplate Clockwork Wind Up Toy by the Lehman Co. "Balky Mule" Circa 1909

H 5 in W 3 in D 7.5 in

Vintage Tin Wind-up Toy "Doughboy" by J.Chein Company. American Circa 1930

By J. Chein & Co.

Located in Incline Village, NV

Of American manufacture, by the J. Chein Toy Company in New York City; this early 1930's vintage

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind-up Toy "Doughboy" by J.Chein Company. American Circa 1930

H 6 in W 2.75 in D 2.75 in

"Boy Riding An Alligator" Vintage Wind-Up Toy by J. Chein Co., N.J., Circa 1935

By J. Chein & Co.

Located in Incline Village, NV

has hardly been played with. To operate: wind up the attached clockwork key; place the toy on the

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"Boy Riding An Alligator" Vintage Wind-Up Toy by J. Chein Co., N.J., Circa 1935

H 3.5 in W 3.25 in D 15 in

Vintage Tin Wind-up Toy "Clown in A Barrel" by J Chein & Co. American Circa 1935

By J. Chein & Co.

Located in Incline Village, NV

smiling face. The toy works great; simply wind the attached key wind in the back 1/2 revolution; place

Category

Vintage 1930s Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind-up Toy "Clown in A Barrel" by J Chein & Co. American Circa 1935

H 7.25 in W 3.25 in D 4 in

'Rajputana' Tin & Celluloid Wind Up Japanese Toy

Located in Hamilton, Ontario

Vintage Japanese tin and celluloid wind up toy. When you wind this toy the top spins around while

Category

20th Century Japanese Toys and Dolls

Materials

Tin

'Rajputana' Tin & Celluloid Wind Up Japanese Toy

H 6.75 in W 3.5 in D 10.5 in

Li'l Abner Tin Lithograph Mechanical Wind-Up Piano Band Toy

By Unique Art Manufacturing Co.

Located in Fulton, CA

Dogpatch Band” . In excellent, original working condition. Tin wind up toy featuring Li'l Abner as singer

Category

Vintage 1940s American Toys and Dolls

Materials

Tin

Li'l Abner Tin Lithograph Mechanical Wind-Up Piano Band Toy

H 8 in W 9.5 in D 5.5 in

Vintage Toy, Wind up Clown on Cart and Donkey, 1960s

Located in Roma, IT

This wind up clown on cart and donkey is a vintage wind up toy representing a multicolor clown in a

Category

Mid-20th Century Russian Toys

Materials

Metal

Vintage Toy, Wind up Clown on Cart and Donkey, 1960s

No Reserve

H 5.12 in W 7.49 in D 3.55 in

Vintage Toy, Wind up Locomotive Wells-Brimtoy 7040, by Wells-Brimtoy, 1930s

Located in Roma, IT

This Wind up Locomotive Wells-Brimtoy 7040 is an originale mechanical toy. Vintage wind up toy

Category

Early 20th Century English Toys

Materials

Metal

Vintage Toy, Wind up Locomotive Wells-Brimtoy 7040, by Wells-Brimtoy, 1930s

No Reserve

H 3.55 in W 6.7 in D 2.56 in

Vintage Toy, Military Toy Truck and Trailer

Located in Roma, IT

This military toy truck and trailer is a wind up toy truck with soldier and its own trailer. Tin

Category

Mid-20th Century European Toys

Materials

Metal

Vintage Toy, Military Toy Truck and Trailer

No Reserve

H 3.75 in W 11.03 in D 3.55 in

Vintage Toy Wind-Up Speed Boat with Driver by Lindstrom Toy Co., American 1933

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

1933 or earlier; the Lindstrom company having been founded in 1913, made quality tin wind-up toys until

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up Speed Boat with Driver by Lindstrom Toy Co., American 1933

H 3.25 in W 3 in D 12.5 in

Vintage Toy Wind-Up "Baby L" Speedboat by Lindstrom Toy Co., American Circa 1933

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

1933 or earlier; the Lindstrom company having been founded in 1913, made quality tin wind-up toys until

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up "Baby L" Speedboat by Lindstrom Toy Co., American Circa 1933

H 3.13 in W 3 in D 10.5 in

Vintage Toy, Marx Toys Wind Up Chariot and Horses, Mid-20th Century

By Marx Toy Co.

Located in Roma, IT

This Marx Toys Wind up Chariot and Horses is a vintage mechanical toy representing a red chariot

Category

Mid-20th Century American Toys

Materials

Metal

Vintage Toy, Marx Toys Wind Up Chariot and Horses, Mid-20th Century

No Reserve

H 4.93 in W 10.83 in D 4.53 in

Vintage Wind Up Tin Toy "Monkey Riding A Horse" by Haji Co., Japan, Circa 1958

Located in Incline Village, NV

Made in Tokyo, Japan by The Haji Company (see image for mark/logo), this all tin vintage wind up

Category

Vintage 1950s Japanese Folk Art Toys and Dolls

Materials

Tin

Vintage Wind Up Tin Toy "Monkey Riding A Horse" by Haji Co., Japan, Circa 1958

H 5.5 in W 2.25 in D 6 in

Vintage Toy, Wind Up Motorcyclist

Located in Roma, IT

This Wind up Motorcyclist is a working toy of unknown production, multi-color rider on a green

Category

Mid-20th Century European Toys

Materials

Metal

Vintage Toy, Wind Up Motorcyclist

No Reserve

H 8.08 in W 7.49 in D 3.55 in

"Walking Popeye" With Parrots Vintage Windup Toy by Marx Toy Co.

By Louis Marx and Company

Located in Incline Village, NV

Vintage 1930's wind-up toy by the Marx Toy Company of New York, portraying the iconic comic

Category

Vintage 1930s Art Deco Toys and Dolls

Materials

Tin

"Walking Popeye" With Parrots Vintage Windup Toy by Marx Toy Co.

H 8.5 in W 2.75 in D 3 in

Original Vintage Toy, Wind Up Jeep Car

Located in Roma, IT

This wind up jeep car is an original vintage metal toy. Unknown manufacturer and age

Category

Early 20th Century French Toys

Materials

Metal

Original Vintage Toy, Wind Up Jeep Car

No Reserve

H 3.35 in W 5.12 in D 2.96 in

Vintage Toy by Lindstrom Dancing Dutch Boy Playing Accordion American Circa 1930

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

Boy" is an all tin wind up toy of American manufacture; made by the Lindstrom Toy Company of

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy by Lindstrom Dancing Dutch Boy Playing Accordion American Circa 1930

H 8 in W 3.25 in D 3.75 in

Original Vintage Toy, Wind Up Circus Performer, 1930s

Located in Roma, IT

This Wind up Circus Performer is an original vintage toy. Vintage wind up mechanical toy

Category

Early 20th Century French Toys

Materials

Metal

Original Vintage Toy, Wind Up Circus Performer, 1930s

No Reserve

H 4.73 in W 1.97 in D 2.76 in

"B.O. Plenty" Vintage Wind-Up Tin Toy by Marx Original Box. American, Circa 1935

By Louis Marx and Company

Located in Incline Village, NV

"B.O. Plenty (printed on the back) is the name of this American made tin wind-up toy; named after

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"B.O. Plenty" Vintage Wind-Up Tin Toy by Marx Original Box. American, Circa 1935

H 8.5 in W 2.75 in D 2.5 in

Vintage Toy Wind-Up "Johnny" The Dancing Clown by Lindstrom Toy Co., Circa 1930

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

This is a hard to find pre war vintage, Made in America wind up tin toy by The Lindstrom Toy

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up "Johnny" The Dancing Clown by Lindstrom Toy Co., Circa 1930

H 8 in W 3.13 in D 3 in

Late 1940s Penny Toy Wind-Up Train, Attributed Japan

Located in Incline Village, NV

Diminutive late 1940s "penny toy like" wind-up tin toy platform train modern and sleek looking for

Category

Vintage 1940s Japanese Folk Art Toys

Materials

Tin

Late 1940s Penny Toy Wind-Up Train, Attributed Japan

H 1 in W 1.5 in D 5.5 in

Vintage Toy, Wind up Drummer Panda, Made in China, 1970s

Located in Roma, IT

This wind up drummer panda is a vintage toy. Vintage toy representing a panda playing the drum

Category

Mid-20th Century Chinese Toys

Materials

Metal

Vintage Toy, Wind up Drummer Panda, Made in China, 1970s

No Reserve

H 4.34 in W 2.17 in D 2.17 in

Vintage Toy Car, Wind Up Red Car, Early 20th Century

Located in Roma, IT

This Wind up red car is a vintage toy made by unknown manifacturer, probably model from 1920s-1930s

Category

Early 20th Century German Toys

Materials

Metal

Vintage Toy Car, Wind Up Red Car, Early 20th Century

No Reserve

H 2.37 in W 5.71 in D 1.97 in

Vintage Toy, Wind Up Big Size Car, Mid-20th Century

Located in Roma, IT

This Wind up big size car is a mechanical toy sports car, nicely detailed. The original

Category

Early 20th Century German Toys

Materials

Metal

Vintage Toy, Wind Up Big Size Car, Mid-20th Century

No Reserve

H 3.75 in W 9.45 in D 3.55 in

Vintage Wind Up Small Car Toy, Made in Germany, 1950s

Located in Roma, IT

This wind up small car is a mechanical vintage toy. Very small nice car beautifully detailed and

Category

Mid-20th Century German Toys

Materials

Metal

Vintage Wind Up Small Car Toy, Made in Germany, 1950s

No Reserve

H 1.19 in W 2.76 in D 2.17 in

Marx Toys Key-Wind Tin Lithograph "Jalopy" Toy Car with Box

By Marx Toy Co.

Located in Fulton, CA

A mechanical wind-up tin lithograph toy car by Marx Toys. "Jalopy" Circa. 1940's. Excellent

Category

Vintage 1940s Toys and Dolls

Materials

Tin

Marx Toys Key-Wind Tin Lithograph "Jalopy" Toy Car with Box

H 4 in W 6.75 in D 5.63 in

Vintage Toy, Wind Up Boy on Tricycle, Made in Germany, 1930s

Located in Roma, IT

This wind up boy on tricycle is a vintage mechanical toy. Vintage wind up mechanical toy

Category

Early 20th Century German Toys

Materials

Metal

Vintage Toy, Wind Up Boy on Tricycle, Made in Germany, 1930s

No Reserve

H 4.53 in W 2.56 in D 2.17 in

Vintage Toy, Wind up Locomotive Ingap 67001, Made by Ingap, 1920s

Located in Roma, IT

This wind up locomotive Ingap 67001 is a vintage toy representing a red mechanical locomotive

Category

Early 20th Century Italian Toys

Materials

Metal

Vintage Toy, Wind up Locomotive Ingap 67001, Made by Ingap, 1920s

No Reserve

H 4.53 in W 9.45 in D 3.75 in

Vintage Toy Car, Military Wind Up Tri-Ang Tiger Tank, Lines Bros Ltd., 1930s

Located in Roma, IT

This Military Wind up tri-ang tiger tank is a vintage toy representing a First World War tank

Category

Early 20th Century English Toys

Materials

Metal

Vintage Toy Car, Military Wind Up Tri-Ang Tiger Tank, Lines Bros Ltd., 1930s

No Reserve

H 2.37 in W 5.71 in D 1.97 in

Antique Toy Wind-Up Double Decker Bus by Ferdinand Strauss Toy Co. Circa 1925

By STRAUSS

Located in Incline Village, NV

Antique Wind-Up Double Decker open air bus by the Ferdinand Strauss Toy Company, New York; circa

Category

Vintage 1920s American Folk Art Toys and Dolls

Materials

Tin

Antique Toy Wind-Up Double Decker Bus by Ferdinand Strauss Toy Co. Circa 1925

H 6 in W 5.5 in D 10.5 in

Vintage Wind-Up Tin Toy Motorcycle with Co-Driver and Key

Located in Schagen, NL

Vintage Wind-up Tin Toy Motorcycle with Co-driver and key. The piece comes from ca. the 1950s and

Category

Vintage 1950s Industrial Toys and Dolls

Materials

Tin

Vintage Wind-Up Tin Toy Motorcycle with Co-Driver and Key

H 5.12 in W 4.73 in D 7.09 in

Vintage Toy Wind-Up Dump Truck by The Marx Toy Company, N.Y. American Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

Offered is a hard to find Marx floor toy dump truck with dual action. NOT diecast------made of all

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up Dump Truck by The Marx Toy Company, N.Y. American Circa 1930

H 4 in W 5 in D 11 in

Vintage Mechanical tin plated wind up Sparrow Bird toy - 1960's - China

Located in EINDHOVEN, NL

Vintage wind-up Sparrow toy with a mechanical tinplated clockwork mechanism - 1960s Manufactured in

Category

Late 20th Century Mid-Century Modern Toys and Dolls

Materials

Metal, Sheet Metal, Tin

Vintage Mechanical tin plated wind up Sparrow Bird toy - 1960's - China

H 21.66 in W 15.75 in D 4.73 in

Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930

By J. Chein & Co.

Located in Incline Village, NV

doing lithography in 1930. This toy wind-up sedan was made circa 1930 and is brightly lithographed and

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930

H 3 in W 3.5 in D 7.25 in

"Joe Penner" Vintage Clockwork Windup Toy by Louis Marx Co American Circa 1930's

By Louis Marx and Company

Located in Incline Village, NV

Fabulous American vintage all tin wind-up toy with attached key and clockwork mechanism, whereby

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"Joe Penner" Vintage Clockwork Windup Toy by Louis Marx Co American Circa 1930's

H 8.5 in W 4.5 in D 4.75 in

"George The Drummer Boy" Tin windup Toy by Louis Marx, New York City. Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

This circa 1930 "George, Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"George The Drummer Boy" Tin windup Toy by Louis Marx, New York City. Circa 1930

H 9 in W 3.75 in D 4 in

Wooden Wind-Up Double Decker Bus

Located in Los Angeles, CA

Charming painted wooden wind-up patinated white / red double-decker bus. Raw wood peeks through the

Category

20th Century Folk Art Toys and Dolls

Materials

Wood

Wooden Wind-Up Double Decker Bus

H 5.5 in W 9 in D 3 in

"Dancing Dog" Vintage Windup Toy. American, Circa 1925

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

"Dancing Dog" is a fairly scarce toy to acquire, especially in this excellent condition and working

Category

Vintage 1920s American Folk Art Toys and Dolls

Materials

Tin

"Dancing Dog" Vintage Windup Toy. American, Circa 1925

H 4 in W 2.25 in D 5.25 in

Collection of 12 Vintage Tin lithograph Toys

By Louis Marx and Company

Located in Redding, CT

Collection of 12 vintage tin lithograph lithograph toys. $400 for the entire collection. Price is

Category

Vintage 1960s German Toys

Materials

Tin

Collection of 12 Vintage Tin lithograph Toys

H 12 in W 11 in D 8 in

Vintage Toy, Schuco Examico 4001 Car, 1950s

Located in Roma, IT

This Schuco Examico 4001 car is a wind up mechanical toy car, made between 1950s/60s. Working

Category

Mid-20th Century German Toys

Materials

Metal

Vintage Toy, Schuco Examico 4001 Car, 1950s

No Reserve

H 2.37 in W 5.91 in D 1.58 in

Vintage Toy, Small Motorcyclist, Made in Japan, 1960s

Located in Roma, IT

This Wind up Boy on Tricycle is an original vintage toy. Vintage friction toy representing a

Category

Late 20th Century Japanese Toys

Materials

Metal

Vintage Toy, Small Motorcyclist, Made in Japan, 1960s

No Reserve

H 2.37 in W 3.94 in D 1.19 in

Mid-20th Century Folk Art English Acrobat Toy

Located in London, GB

Mid-20th century Folk Art English acrobat toy We are proud to offer a rare example of a mid-20th

Category

Vintage 1940s British Folk Art Toys

Materials

Wood

Mid-20th Century Folk Art English Acrobat Toy

H 10 in W 4.5 in D 3 in

Vintage Toy, The Flyer 1956 Locomotive and Coach, 1956

Located in Roma, IT

The Flyer 1956 locomotive and coach is a rare vintage toy. Vintage wind up tin toy train made of

Category

Mid-20th Century German Toys

Materials

Metal

Vintage Toy, The Flyer 1956 Locomotive and Coach, 1956

No Reserve

H 3.55 in W 8.86 in D 2.37 in

Vintage Toy, Schuco 1750 Car, Made in Germany, Mid-20th Century

Located in Roma, IT

This Schuco 1750 car is a wind up mechanical toy car, made in Germany, between 1938 and 1960

Category

Mid-20th Century German Toys

Materials

Metal

Vintage Toy, Schuco 1750 Car, Made in Germany, Mid-20th Century

No Reserve

H 1.97 in W 5.91 in D 1.97 in

Marx "Wonder Cyclist" American Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

Marx "Wonder Cyclist" is the earlier version of this wind-up "Boy on a Tricycle" toy; and not to be

Category

Antique 1830s American Folk Art Toys and Dolls

Materials

Metal

Marx "Wonder Cyclist" American Circa 1930

H 9 in W 4.75 in D 8.25 in

Antique Mickey Mouse & Minnie Mouse Train Hand Car by Disney & Lionel Circa 1934

By Walt Disney

Located in Incline Village, NV

Vintage Mickey/ Minnie Mouse Toy Wind-Up pre-war handcar (train car) circa 1934; by The Lionel

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Metal

Antique Mickey Mouse & Minnie Mouse Train Hand Car by Disney & Lionel Circa 1934

H 6 in W 2 in D 9.75 in

Adorable and Therapeutic Musical Clown Automaton Figure Toy

Located in Miami, FL

A fine quality therapeutic musical automaton clown toy in wonderful vintage condition. Features

Category

Mid-20th Century French Mid-Century Modern Toys and Dolls

Materials

Metal

Adorable and Therapeutic Musical Clown Automaton Figure Toy

H 13 in W 5 in D 4 in

Get Updated with New Arrivals

Save "Wind Up Toy", and we’ll notify you when there are new listings in this category.

Wind Up Toy For Sale on 1stDibs

With a vast inventory of beautiful furniture at 1stDibs, we’ve got just the wind up toy you’re looking for. A wind up toy — often made from metal, tin and fabric — can elevate any home. Whether you’re looking for an older or newer wind up toy, there are earlier versions available from the 19th Century and newer variations made as recently as the 20th Century. A wind up toy, designed in the Folk Art or Mid-Century Modern style, is generally a popular piece of furniture. Nomura Toy Industrial Co. Ltd., Louis Marx and Company and Marx Toy Co. each produced at least one beautiful wind up toy that is worth considering.

How Much is a Wind Up Toy?

Prices for a wind up toy start at $60 and top out at $1,895 with the average selling for $313.

Questions About Wind Up Toy

How does a wind-up toy work?
1 Answer
1stDibs ExpertApril 5, 2022
How a wind-up toy works relies on a part called a torsion spring. When you turn the knob or key, tension builds up on the torsion spring. When you stop winding, the accumulated energy sets an inner gear in motion that powers the movement of the toy. Find a collection of antique and vintage wind-up toys on 1stDibs.
What are wind-up toys called?
1 Answer
1stDibs ExpertApril 5, 2022
Wind-up toys are sometimes called mechanical toys or clockwork toys. The earliest examples date back to 15th-century Germany, where Karel Grod produced a number of mechanical toys. Shop a collection of antique vintage wind-up toys on 1stDibs.
When were wind up dolls invented?
1 Answer
1stDibs ExpertApril 5, 2022
There are legends and evidence of wind-up toys and sculptures dating back to antiquity, but modern wind-up dolls were being made in large quantities by the 19th century. Shop a collection of antique wind-up toys from some of the world’s top sellers on 1stDibs.
Do I have to wind a Rolex?
1 Answer
1stDibs ExpertApril 5, 2022
No, you don’t have to wind a Rolex watch as long as you are wearing it regularly. Rolex watches feature a Perpetual rotor that collects energy from the wrist’s movement and converts it into power for the watch. Browse a collection of expertly authenticated Rolex watches from top sellers on 1stDibs.
How do you wind up a Rolex watch?
1 Answer
1stDibs ExpertApril 5, 2022
Most Rolex watches use a Perpetual rotor which means that they do not need winding if worn regularly. If you have not worn your watch in some time, you can manually wind it by unscrewing the crown to the winding position and turning it clockwise about 20 times. Make sure to screw the crown back into place after winding to reestablish its waterproof qualities. Shop a collection of authentic Rolex watches from some of the world’s top boutiques on 1stDibs.
How do I wind a Piaget watch?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Piaget watch, pull out the winding crown located on the side. Turn it clockwise until you detect resistance. For a full wind, you will normally need to twist about 20 times. On 1stDibs, find a range of Piaget watches.
What is a North Wind chair?
1 Answer
1stDibs ExpertApril 5, 2022
North Wind chairs feature a mythical figure, such as a fantasy creature or animal, carved into the top back. The chair was meant to protect a space from evil spirits. On 1stDibs, find a selection of North Wind chairs from some of the world’s top sellers.
How to wind a datejust rolex?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Rolex Datejust, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a wide selection of Rolex Datejust watches on 1stDibs.
How do I wind a Rolex Datejust?
1 Answer
1stDibs ExpertMarch 22, 2022
To begin to wind a Rolex Datejust, unscrew the winding crown fully. Then, turn the crown in a clockwise direction at least 25 times for a partial winding. Because the watch self-winds as you move, you usually only need to wind a Rolex Datejust before the first wear or if you let several days pass between wears. You’ll find a large selection of Rolex Datejust watches on 1stDibs.
What is a Gone With the Wind lamp?
1 Answer
1stDibs ExpertApril 5, 2022
Gone With the Wind lamps are chamber or hurricane lamps. They are characterized by their hand-painted globes with decorative floral motifs. Shop a collection of antique Gone With the Wind lamps from some of the world’s top boutiques on 1stDibs.
How do I wind a Rolex watch?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a Rolex watch, first fully unscrew the winding crown. Once it is in a raised position, carefully turn the crown clockwise. Most watches require 25 turns for enough winding to begin powering the watch. The instructions included with Rolex watches provide more information about how to wind specific models. Shop a large collection of Rolex watches on 1stDibs.
How do I wind a Rolex Oyster?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Rolex Oyster, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a selection of well-vetted Rolex Oyster watches on 1stDibs.
How do you wind an Elliott clock?
1 Answer
1stDibs ExpertFebruary 13, 2023
To wind an Elliott clock, first, find the slot in the back. Insert the key or crank and turn until the winding mechanism doesn't move anymore. Avoid forcing the mechanism any further to prevent damage. On 1stDibs, shop a range of clocks from some of the world's top sellers.
How do I wind a banjo clock?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a banjo clock, insert the key into the winding point. Turn the key in a clockwise fashion until the winding mechanism disengages. If you no longer have the winding key, see an experienced clock repair shop for assistance. You'll find a variety of banjo clocks on 1stDibs.
How do I wind a vintage Omega watch?
1 Answer
1stDibs ExpertApril 5, 2022
Wind a vintage Omega watch by twisting the crown at the side in a clockwise direction. Stop winding once you feel the movement of the crown stop. Browse a range of authenticated vintage and contemporary Omega watches from top sellers on 1stDibs.
How do I wind an Ansonia mantel clock?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind an Ansonia mantel clock, first insert the key into the center winding point, usually found on the back. Then, turn the key clockwise until the winder no longer turns. Repeat the process in the right winding point to set the quarter-hour charm and the left winding point to set the hour strike. You'll find a range of Ansonia clocks on 1stDibs.
How do I wind a Vacheron Constantin watch?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a Vacheron Constantin, turn the winding crown clockwise until you sense some resistance. Typically, manual-winding watches require daily winding. You usually won't have to wind a self-winding timepiece unless you do not wear it for a day or two. Shop a range of Vacheron Constantin watches on 1stDibs.
How do I manually wind a Patek Philippe?
1 Answer
1stDibs ExpertApril 5, 2022
To manually wind your Patek Philippe watch, locate the crown and rotate it clockwise 30 to 40 times. Stop as soon as you feel resistance to avoid overwinding — this is important, as overwinding can potentially damage your watch. Find an assortment of vintage manual Patek Philippe watches on 1stDibs.
What is a key wind pocket watch?
1 Answer
1stDibs ExpertApril 5, 2022
A key-wind pocket watch is a type of portable timepiece produced from the early 19th century through the middle of the 19th century. It features a mechanism that requires regular winding with a device called a winding key. Shop a range of key-wind pocket watches on 1stDibs.
How often should I have to wind my Patek Philippe?
1 Answer
1stDibs ExpertMarch 22, 2022
How often you need to wind your Patek Philippe watches depends on what type of movement system it has. Normally, you’ll need to wind a mechanically wound watch every morning before you put it on. Self-winding watches receive power from your movements. Unless you don't wear your watch for a period of 36 to 48 hours or more, you should only need to wind it once before you slip it on for the first time. Explore a wide range of Patek Philippe watches on 1stDibs.
What is considered an antique toy?
1 Answer
1stDibs ExpertFebruary 13, 2023
Generally, an antique toy is any toy made over 100 years ago. A toy made more than 20 years ago is vintage. Shop an assortment of toys on 1stDibs.
What is the most valuable vintage toy?
1 Answer
1stDibs ExpertFebruary 22, 2021
Some of the most valuable old toys include Vintage Sky Dancers, Yu-Gi-Oh! Cards, and Original Furby dolls. Some action figures can be worth around $700 today.
How old are key-wind pocket watches?
1 Answer
1stDibs ExpertApril 5, 2022
How old key-wind pocket watches are varies greatly. Watchmakers used key-wind mechanisms in pocket watches starting in the 16th century and continued the practice until the mid 19th century. You can find a collection of key-wind pocket watches on 1stDibs.