Side-Gallery

Gae Aulenti Table lamp model “Giova” Manufactured by Fontana Arte Italy, 1964 Blown glass Measurements: 32 Ø cm x 38 H cm. 13 Ø in x 15 H in. Provenance Private collec...

Ceiling Lamp 05 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 46 cm ø x 170 H cm...

Ceiling lamp 04 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 110 cm x 100 cm x ...

Ceiling Lamp 03 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED 110 cm x 90 cm x 140 h cm 43...

Ceiling Lamp 02 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 100 cm x 110 cm x ...

Ceiling lamp 01 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 120 cm x 90 cm x 8...

Floor Lamp 04 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Dimensions: 200 cm x 110 cm x ...

Floor lamp 03 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 70 cm x 70 cm x 66 h...

Floor lamp 02 From the series ‘Soft Boxing’ Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED Measures: 110 cm x 80 cm x 200...

Floor lamp 01 From the series “Soft Boxing series II” Manufactured by Oliver Sundqvist & Frederik Nystrup-Larsen Copenhagen, 2022 Steel, coated acrylic knit, LED 138 cm x 130 cm x 14...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggre...

Table lamp model “Epilith II” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, silicon...

Hanging chandelier model “Verdigris” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, acrylic resin, pigment, marble and quartz powder,...

Chandelier model “Tillandsia” From the series "Epilith Lamps" Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, silicone, pigment, electrical components. Led 5 x...

Hanging lamp model “Ultramarine violet” From the series “Epilith lamps” Manufactured by Elissa Lacoste France, 2022 Recycled aluminum, acrylic resin, pigment, marble quartz...

Table lamp model “Bauxite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sili...

Table lamp model “Heliotrope” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, s...

Table lamp model “Tephrite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sil...

Table lamp model “Amanite” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sili...

Table lamp model “Amethyst” From the series “Epilith Lamps” Manufactured by Elissa Lacoste France, 2022 Recycled cast aluminum, Acrylic resin, pigment, mineral aggregates, sil...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggregate...

Floor lamp model “Totem” Manufactured by Sabine Marcelis Produced in exclusive for SIDE GALLERY Rotterdam, The Netherlands 2021 Resin, Neon (+transformer) Measurements 18 cm x 17 cm x 170h cm 7,08 in x 6,69 in x 66,92h in Edition Limited edition of 12 + 2AP Since graduating, she has been operating Studio Sabine Marcelis, working within the fields of product, installation and spatial design with a strong focus on materiality. Her work is characterized by pure forms and natural elements such as the reflections of light and water, which she believes highlight material properties. Growing up in New Zealand Sabine was surrounded by dramatic landscapes, always sensitive to the light of the sky, the ocean and the snow on the mountains, the artist was inspired by the communication of the natural elements. Her work captures these beautiful moments in nature on a smaller scale, as objects or installations. Over the last decade, the award-winning designer has become known for her work with resin and glass. Her receptiveness for these two materials is due to their manipulability; sharp angular shapes as well as spineless curves can be protracted giving the artist endless scope for form. Moreover, the translucency of the both materials can be adjusted from sheer transparency to milky or solid opaque finishes. Working in collaboration with industry specialists, Marcelis intervenes in the manufacturing processes using material research and experimentation to achieve new and surprising visual effects, applying a strong aesthetic point of you to the material development processes. The series Candy Cubes is an example of the designer’s complex material investigation; a polyester resin mold is used to cast the piece, followed by an intensive polishing process. The cast resin is light sensitive, as sun rays shine down onto the solid blocks, the light illuminates the edges, sugar coating the sides, making the aptly named “marshmallow” colored candy cube appear edible. As well as playing with natural light, Marcelis also experiments with artificial lighting in her work. The introduction of neon light to her material combinations expresses the relationship between light, color and transparency in a more constant context. In 2015 Marcelis produced the series Dawn Light whereby the introduction of a white neon tube to a series of different geometric resin objects was used to reflect a unique moment in nature; when the sun, clouds and sky all join together, creating a momentary riot of hues. The series was on show at the Museum Boijmans Van Beuningen in Holland. Since then Marcelis has continued to work with neon and resin developing complex colour recipes and finishes, resulting in her Totem Series commissioned and sold exclusively by Side Gallery in 2019. The collection is composed of four different sized lighting elements, two table and two standing lamps. The Totems are built with several stacked translucent resin volumes which are slightly rotated on a central axis. The carved-out void where the neon light is inserted allows for a multifaceted play between the twisted planes of polished resin and light reflections. Every angle of the lights is a unique visual experience. As well as designing object pieces, the Dutch designer has a series of impressive installation projects associated with her profile including, the Aesop Vedovelle Fountain, the Dutch Pavilion at Cannes Film festival 2017, a Light installation at Biennale Interieur 2018, The Solo Sun Dial project 2018, Burberry x OC in 2018 and De/Coding ‘Alcantara in the tapestry Rooms’ in 2019. Perhaps her most famous installation was her Shapes of Water or Fendi Fountains installation, first exhibited at Design Miami 2018. The ten water sculptures designed from cast resin were a continuation of Marcelis experience and experimentation in material practices, projecting her own vision her elegant avant-garde creativity corresponded directly with the Fendi philosophy. The designers most prestigious exhibition yet, was her museum show “NO FEAR OF GLASS” in December 2019. The intervention commissioned by Side Gallery in collaboration with the Mies Van de Rohe Foundation, consisted of five original works by the Dutch designer, meticulously placed within the Pavilion. The five pieces were designed to extrude from the architecture itself; two large chaise lounges...

Lamp From the series “Concept Kitchen” Produced in exclusive for SIDE GALLERY Manufactured by Bagnara Italy, 2020 Apls Glitter marble Measurements 30 cm x 30 cm x 180h cm 1...

Floor lamp From the series "Urben Stem" Manufactured by Rollo Bryant Engineer Patou Morrow Produced for Side Gallery Eindhoven (The Netherlands), 2021 PLA (polymer), PVA (polyvinyl), Silver Sand, P.T.B Pigment, Acrylic Glass, Aluminium E27 Dragon Light...

Table lamp model “Epilith V” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum (oxidized), Acrylic One resin, pigments, mineral aggreg...

Table lamp model “Epilith IV” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, ...

Table lamp model “Epilith III” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, sil...

Table lamp model “Epilith II” From “Epilith Lamps” series Manufactured by Elissa Lacoste France, 2021 Recycled cast aluminum, Acrylic One resin, pigments, mineral aggregates, sili...

Ceramic vase model “Urn for unwanted limbs and other things” Manufactured by Virginia Leonard New Zealand, 2022 Clay, lustre Virginia Leonard ho...

Sam Chermayeff Standing lamp From the series “Beasts” Produced in exclusive for SIDE GALLERY Manufactured by Sam Chermayeff Berlin, 2021 Steel, mirror, upholstery Contemporary Design Measurements 40 cm x 30 cm x 190h cm (90 cm...

Sabine Marcelis Wall lamp From the “Voie light Series” Rotterdam, The Netherlands 2017 Resine and neon Edition Limited edition of 5 Measurements 72cm W ...

Luigi Caccia Dominioni (1913-2016) Pair of wall lamps model “Boccia” Manufactured by Azucena Italy, 1969 Enamel steel, glass 20th century Italian design wall lights or sconces...

Gino Sarfatti (1912-1985) Pair of wall lamps (two pairs available) (Price per Light not per pair.) Manufactured by Arteluce Italy, 1950 Perspex and painted metal Measurements: 17.8 cm x 22.9 cm x 8.9 cm 7 in x 9 in x 4.5 in Literature: MarCo Romanelli and Sandra Severi, Gino Sarfatti: selected works 1938-1973, Milan, 2012 Details: Each with manufacturer’s paper label (2) Bio: Rising above the devastation of World War II, post-war Italian design reached new heights of productivity and ingenuity, particularly in the realm of lighting. Gino Sarfatti is among the most celebrated lighting designers from this fruitful period. Before founding his company Arteluce in 1939, Sarfatti studied aeronautical engineering. He brought the inventiveness of a self-taught outsider to the field of lighting design, while his mechanical background lent lightness and ingenuity of construction. Poetic underpinnings are also evident in lamps such as model no. 1034 (sometimes referred to as the “Vine” lamp...

Gino Sarfatti (1912-1985) Pair of triple sconces model “237/3” Manufactured by Arteluce Italy, 1959 Painted iron, aluminum, glass. Measurements: 28 cm x 46 cm x 21 H cm eac...

Gae Aulenti  Table lamp model “King Sun” Manufactured by Kartell Italy, 1967. Enameled aluminum, acrylic. Measurements: 74 cm x 79 cm x 71 H cm. 29 in x 19.25 in x 28 H in.

Gae Aulenti  Table lamp model “Poveglia” Manufactured by Vistosi Italy, 1969 Blown glass Measurements 38 cm diameter x 29 cm height 15 in diameter x 11.5 in height Deta...

Chandelier model 4 Manufactured by Guillermo Santomá Edition Side Gallery Barcelona, 2018 Methacrylate, fluorescent, spray painting, wire, light bulb. Guillermo Santomá is a designe...

Sabine Marcelis rectangular horizontal chandelier or pendant lamp from the Filter series in color ochre/ yellow. Made from resin, high macs and neon,. Manufactured by Sabine Marcel...

Sabine Marcelis chandelier from the Filter series in color blue. Made from resin, high macs and neon. Manufactured by Sabine Marcelis. Produced exclusively for SIDE GALLERY. Made...

Lukas Saint-Joigny Chandelier From the “Ore” series Manufactured by Lukas Saint-Joigny Produced in exclusive for side gallery Paris, 2020 Various materials and polyurethane res...

Sabine Marcelis Floor Lamp “Pillar” Tall From the series “No Fear of Glass” Manufactured by Sabine Marcelis Produced in exclusive for Side ...

Sabine Marcelis Floor Lamp “Pillar” (Small) From the series “No Fear of Glass” Manufactured by Sabine Marcelis Produced in exclusive for Si...

Christopher Stuart Ceiling lamp model “Suspended Structure 1” Manufactured by Christopher Stuart Produce in exclusive for Side Gallery Indiana, USA, 2019 Stainless steel, glass neon light...

Luis Barragan (1902-1988) Ceramic table lamp From Casa del Pedregal (Casa Prieto López) Manufactured by Hugo X. Velázquez México, 1952 Ceramic, parc...

Pietro Chiesa (1913-2016) Floor lamp model “Luminator” Manufactured by Fontana Arte Italy, 1963 Painted steel and concrete base covered in brass. Measurements 33 Ø cm x 186h cm 12,99 Ø in x 73,22h in Literature Domus, n. 115, luglio, 1937, p. 16, pubblicita`; F. Deboni, Fontana Arte. Gio Ponti, Pietro Chiesa, Max Ingrand, Allemandi Editore, Torino, 2012, ill. 95, 96. Condition Some dents on the edges and corrosions over the lamshade and base. Biography Pietro Chiesa (born 1892, Milan–died 1948...

Wall lamp model “nº1” Manufactured by Valerie Objects Belgium, 2015 Painted metal frame or Brass Open edition Measurements 183 cm x 140h cm 72 in x 55...

Wall lamp model “nº5” Manufactured by Valerie Objects Belgium, 2015 Painted metal frame (Brass finish also available please contact us for pricing) O...

Joe Colombo (1930-1971) Table lamp model “2207 Flash” Manufactured by Oluce Italy, 1968 Lacquered metal Measurements 16cm Ø x 31 H cm 6.29in Ø x 12.2 H in Biography Jo...