Davis Cabinet Co Teakwood Chinoiserie Night Table Bed End Side Nightstand

"Vintage Davis Cabinet Company low chest of drawers / dresser / nightstand / TV console. Made of ebonized cerused oak featuring rectangular form with asian styling and three drawers with brass hardware. These words of our venerable leader introduce this short history of our firm which began in 1929. There are certainly older furniture companies ---- and obviously younger ones, but quite likely, none with a more romantic history or a more Horatio Alger-like history than ours. Davis Cabinet Company began as the dream of one man, Lipscomb ""Lip"" Davis, and as is the case with most dreams, this one ---- the impractical idea of building fine furniture from solid wood ---- was thought to be an impossibility. Wood, like steel and iron and most other substances, expands and contracts with climate changes. Furniture built of solid wood must of necessity rack itself to pieces through the inexorable changes of expansion and contraction. Lipscomb Davis thought otherwise. His personal philosophy might be expressed as ""Anything can be accomplished if it is done correctly"", and to this end he had already conceived and engineered a startling new concept of free floating construction that would allow the solid wood case construction to move at will . . . . naturally . . . and thereby avoid the stresses of climatic change. The opportunity to test the idea came dramatically in 1929 ---- but we're getting a bit ahead of our story. While Davis Cabinet Company was formed in 1929, it really had its beginnings around the turn of the century as a sawmill located near Fifth Street on the banks of the Cumberland River. The mill produced lumber from logs rafted down the river from neighboring forests. A ready market existed for most of the high grade lumber turned out by the mill. But, in order to utilize their entire production, the enterprising mill owners formed a subsidiary business, Standard Furniture Company. Here, they manufactured primarily veneered bedroom suites and sewing machine cabinets...

"Vintage Davis Cabinet Company bookcase commode. Made of teakwood featuring asian styling with upper book shelves and lower cabinet. Circa late 20th century, Nashville Tennessee. #1515 These words of our venerable leader introduce this short history of our firm which began in 1929. There are certainly older furniture companies ---- and obviously younger ones, but quite likely, none with a more romantic history or a more Horatio Alger-like history than ours. Davis Cabinet Company began as the dream of one man, Lipscomb ""Lip"" Davis, and as is the case with most dreams, this one ---- the impractical idea of building fine furniture from solid wood ---- was thought to be an impossibility. Wood, like steel and iron and most other substances, expands and contracts with climate changes. Furniture built of solid wood must of necessity rack itself to pieces through the inexorable changes of expansion and contraction. Lipscomb Davis thought otherwise. His personal philosophy might be expressed as ""Anything can be accomplished if it is done correctly"", and to this end he had already conceived and engineered a startling new concept of free floating construction that would allow the solid wood case construction to move at will . . . . naturally . . . and thereby avoid the stresses of climatic change. The opportunity to test the idea came dramatically in 1929 ---- but we're getting a bit ahead of our story. While Davis Cabinet Company was formed in 1929, it really had its beginnings around the turn of the century as a sawmill located near Fifth Street on the banks of the Cumberland River. The mill produced lumber from logs rafted down the river from neighboring forests. A ready market existed for most of the high grade lumber turned out by the mill. But, in order to utilize their entire production, the enterprising mill owners formed a subsidiary business, Standard Furniture Company. Here, they manufactured primarily veneered bedroom suites and sewing machine cabinets...

"Vintage Davis Cabinet Company tiered book table. Made of Fleming Walnut featuring octagon form base with three tiers accented with lattice supports and oval serpentine top. Circa 1989, Nashville Tennessee. 7-183 These words of our venerable leader introduce this short history of our firm which began in 1929. There are certainly older furniture companies ---- and obviously younger ones, but quite likely, none with a more romantic history or a more Horatio Alger-like history than ours. Davis Cabinet Company began as the dream of one man, Lipscomb ""Lip"" Davis, and as is the case with most dreams, this one ---- the impractical idea of building fine furniture from solid wood ---- was thought to be an impossibility. Wood, like steel and iron and most other substances, expands and contracts with climate changes. Furniture built of solid wood must of necessity rack itself to pieces through the inexorable changes of expansion and contraction. Lipscomb Davis thought otherwise. His personal philosophy might be expressed as ""Anything can be accomplished if it is done correctly"", and to this end he had already conceived and engineered a startling new concept of free floating construction that would allow the solid wood case construction to move at will . . . . naturally . . . and thereby avoid the stresses of climatic change. The opportunity to test the idea came dramatically in 1929 ---- but we're getting a bit ahead of our story. While Davis Cabinet Company was formed in 1929, it really had its beginnings around the turn of the century as a sawmill located near Fifth Street on the banks of the Cumberland River. The mill produced lumber from logs rafted down the river from neighboring forests. A ready market existed for most of the high grade lumber turned out by the mill. But, in order to utilize their entire production, the enterprising mill owners formed a subsidiary business, Standard Furniture Company. Here, they manufactured primarily veneered bedroom suites and sewing machine cabinets...

"Vintage Davis Cabinet Company commode or side table. Made of Walnut featuring square serpentine form with two drawers, carved accents and cabriole legs. Circa late 20th century, Nashville Tennessee. These words of our venerable leader introduce this short history of our firm which began in 1929. There are certainly older furniture companies ---- and obviously younger ones, but quite likely, none with a more romantic history or a more Horatio Alger-like history than ours. Davis Cabinet Company began as the dream of one man, Lipscomb ""Lip"" Davis, and as is the case with most dreams, this one ---- the impractical idea of building fine furniture from solid wood ---- was thought to be an impossibility. Wood, like steel and iron and most other substances, expands and contracts with climate changes. Furniture built of solid wood must of necessity rack itself to pieces through the inexorable changes of expansion and contraction. Lipscomb Davis thought otherwise. His personal philosophy might be expressed as ""Anything can be accomplished if it is done correctly"", and to this end he had already conceived and engineered a startling new concept of free floating construction that would allow the solid wood case construction to move at will . . . . naturally . . . and thereby avoid the stresses of climatic change. The opportunity to test the idea came dramatically in 1929 ---- but we're getting a bit ahead of our story. While Davis Cabinet Company was formed in 1929, it really had its beginnings around the turn of the century as a sawmill located near Fifth Street on the banks of the Cumberland River. The mill produced lumber from logs rafted down the river from neighboring forests. A ready market existed for most of the high grade lumber turned out by the mill. But, in order to utilize their entire production, the enterprising mill owners formed a subsidiary business, Standard Furniture Company. Here, they manufactured primarily veneered bedroom suites and sewing machine cabinets...

A modern end table by Heritage Home Group, 2017. A rectangular form finished in walnut with a central drawer featuring nickel finished drawer pul...

"A lovely nightstand or accent table by Robert W. Irwin Furniture Company. Crafted from French Walnut in Louis XV styling. Features a rectangular form with open cubby flanked by fl...

Offering One Of Our Recent Palm Beach Estate Fine Furniture Acquisitions Of A French Solid Wood Chiffonnière Table Featuring 5 drawers and 2 side t...

chinoiserie antiqued mirror top end tables, probably Chinese, circa 1950s. Antiqued mirror table tops recently replaced. They are a versatile size...

Pair of Mid-Century Modern 3 drawer oak and burl wood night stands by Broyhill.  

Nice Mid-Century Modern walnut cabinet in style of Risom.

We are delighted to offer for sale this stunning Georgian style pair of nightstands. We have lightly restored this by cleaning it, hand waxed, and hand polished it. Dimension: ...

Pair of Asian influenced end tables or nightstands, Asian, circa 1950s. They are a versatile size and can be used as side or end tables, or as nightstands. These tables are currently...