Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 20

Aircraft Design Wind Tunnel Scale Model of a Late 1960s GAC-100 Airliner

About the Item

A 1/10 scale wind tunnel model of a GAC-100 Commuter airliner. Wingspan: 7ft (214 cm) The model is constructed out of laminated mahogany, and is built to the highest standards, it has moving ailerons, rudder, and trims. It was made in 1969 by F.W. Dixon & Co of Newton MA, for General Aircraft Corp. Pasadena, California. See photographs of the model being made in the F.W. Dixon workshop. The model was tested in the wind tunnel at the Guggenheim Aeronautical Laboratory, Cambridge, MA. The tests were led by Prof. J.T. Bicknell of MIT (Massachusetts Institute of Technology), 26th of February 1969-9th of April 1969. The GAC-100 was designed as a low wing monoplane with four turboprop engines mounted on the leading edges of the wings. The all-metal fail-safe semi-monocoque tubular fuselage was to have been pressurized and to accommodate a flight crew of two, 50-60 passengers. Power was to be supplied by four Pratt & Whitney Canada PT6A-65R turboprop engines driving five-bladed Hartzell Propeller constant speed reversible propellers. Designer Ladislao Pazmany.
  • Dimensions:
    Height: 33.47 in (85 cm)Width: 84.26 in (214 cm)Depth: 80.71 in (205 cm)
  • Style:
    Industrial (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    circa 1968
  • Condition:
    Wear consistent with age and use. Minor losses.
  • Seller Location:
    London, GB
  • Reference Number:
    1stDibs: LU1190217124012
More From This SellerView All
  • Wind Tunnel Model of a Douglas Destroyer Made by NACA/NASA in 1942
    Located in London, GB
    A very rare World War II 1/5 scale wind tunnel development model of a Douglas "Destroyer" XSB2D-1 torpedo and dive bomber, circa 1942. The model was made by N.A.C.A. and tested at...
    Category

    Vintage 1940s American Aviation Objects

    Materials

    Aluminum

  • 1960's Scale Model of a Boeing 720
    Located in London, GB
    A aluminium scale model of a Boeing 720 circa 1965. 1/60 scale. On original stand. The Boeing 720 is a narrow-body airliner produced by Boeing Commercial Airplanes, a 707 derivat...
    Category

    Mid-20th Century Dutch Aviation Objects

    Materials

    Aluminum

  • Lufthansa Boeing 747 Scale Model by Verkuyl of Holland
    By Matthijs Verkuyl
    Located in London, GB
    A scale model of a Lufthansa Boeing 747 - 100 by Verkuyl of Holland. 1/100 scale. Made by Matthys M Verkuyl, Badhoevedorp, Holland. As marked to the u...
    Category

    Late 20th Century European Industrial Aviation Objects

    Materials

    Metal

  • Prototype Design for an Aircraft Propeller Hub
    Located in London, GB
    A laminate mahogany prototype design for an aircraft propeller hub, circa 1935. Measures: Height: 31.5 cm - 12 inches. Diameter: 23 cm - 9 inc...
    Category

    Mid-20th Century English Aviation Objects

    Materials

    Mahogany

  • Hercules C-130 Aircraft Propellers
    Located in London, GB
    A pair of propellers from a Lockheed Hercules C-130, circa 1965. Polished and mounted on display bases. The Lockheed C-130 Hercules is a four-engine turboprop military transpor...
    Category

    Mid-20th Century American Industrial Aviation Objects

    Materials

    Aluminum

  • Scale Model of the KLM DC-8 Know as the The Flying Dutchman
    By Matthijs Verkuyl
    Located in London, GB
    A scale model of the KLM "The Flying Dutchman" Douglas DC-8 by Verkuyl of the Netherlands. On original stand. Made by Matthys M Verkuyl - B...
    Category

    Mid-20th Century European Industrial Aviation Objects

    Materials

    Aluminum

You May Also Like
  • DC-3 Dakota Aircraft Reduced Model Scale, Model 1936
    Located in Paris, FR
    DC-3, Dakota aircraft reduced model scale model. Handcrafted in aluminium foil, with engraved metal rivets, 1936. .
    Category

    21st Century and Contemporary British Models and Miniatures

    Materials

    Aluminum

  • Folk Art Model of a Lockheed Constellation Airliner
    Located in San Mateo, CA
    Large model of a Lockheed Constellation made by Charles Long. The airplane is made of redwood. The propellers are pine. Charles was a captain in...
    Category

    Vintage 1950s American Folk Art Aviation Objects

    Materials

    Wood

  • Concorde Model Supersonic Aircraft
    Located in Paris, FR
    Model supersonic concorde aircraft with structure and base in polished aluminum.
    Category

    21st Century and Contemporary Dutch Figurative Sculptures

    Materials

    Aluminum

  • A late 19th century scale model of field cannon
    Located in Lymington, Hampshire
    A late 19th century scale model of field cannon, the barrel with a flared muzzle on an oak carriage with twin twelve spoke steel rimmed wheels and steel mounted body, a single ammuni...
    Category

    Antique Late 19th Century European Arms, Armor and Weapons

    Materials

    Steel

  • Midcentury Spitfire Fighter Aircraft Model
    Located in Weesp, NL
    Beautiful metal fighter airplane model of the legendary Spifire which was produced from 1938-1948. The Spitfire was designed as a short-range, high-performance interceptor aircraft ...
    Category

    Vintage 1950s British Mid-Century Modern Aviation Objects

    Materials

    Metal

  • City of Stuttgart TV Television Tower Scale Design Model, 1970s
    Located in Nuernberg, DE
    Scaled model of the Stuttgart television tower. Hand-spun in brass. A nice architectural sculpture for every living or men’s room. Some scratches and a nice ...
    Category

    Vintage 1970s German Mid-Century Modern Models and Miniatures

    Materials

    Brass

Recently Viewed

View All