Italian Furniture

Carlo Scarpa "Samo" oval table for Simon Gavina, white Carrara marble, Italy, 1971. The Scarpa's way of thinking the architecture is particularly visible in this piece. The “Samo” d...

“Delfi” dining table, designed by Carlo Scarpa and Marcel Breuer and produced by the Italian manufacturer Studio Simon in 1969. Made of white Nax...

Carlo Scarpa and Hiroyuki Toyoda for Simon Gavina, conference table, fabric top, chromed steel, Italy, design 1973 Elegant conference table was initially designed by Carlo Scarpa in...

Beautiful antique Murano hand blown Sommerso clear white bubbles and gold flecks Italian art glass mini vase / vide poche. Documented to the Venini company, and created by master des...

“Poliedri” chandelier designed by Carlo Scarpa and produced by the Italian manufacturer Venini in, 1958. Made of opaline Murano glass. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. Only a year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity; from 1927, he began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building which stands on the banks of the Grand Canal, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, which are all worth mention. One of his key works, despite its relatively modest diminished proportions, was the first of many works which were to follow in the nineteen fifties: the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and shows clearly Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how twentieth-century museums were to be set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his greatest ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of the Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) and at the Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider being one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions which were to make the most of his formal skills, working on the Carlo Felice Theatre in Genoa as well as another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa began work building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem”, [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure”. Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded 8 years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana”, “Quatour” and “Orseolo”. While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

Set of 5 mod. 783 “Kentucky” dining chairs, designed by Carlo Scarpa for the Italian manufacturer Bernini in 1977. Structure made from oak and walnut timber. Seats and backrest made from cognac leather. Excellent vintage condition. Carlo Scarpa designed this chair for the “Scuderia” series., the last project he made for Bernini. The architect took inspiration from the “shaker” movement. He designed the chair slightly inclined at the front. This feature allows you to swing backward (until you lean on a wall) and remain in balance. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. A year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity. From 1927, Carlo Scarpa began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building that stands on the Grand Canal banks, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, all worth mentioning. One of his key works, despite its relatively modest diminished proportions, was the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and clearly shows Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how twentieth-century museums were set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his most significant ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of: – Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) – Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on the renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions, working on the Carlo Felice Theatre in Genoa and another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa started building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem,” [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure.” Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded eight years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana,” “Quatour,” and “Orseolo.” While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

“Scuderia” dining table, designed by Carlo Scarpa and produced by the Italian manufacturer Bernini in 1977. Originally, Carlo Scarpa designed the table to restore the stable of Villa Valmarana in Vicenza in 1972. The table features a solid walnut structure. Available also five “Kentucky” dining...

Vaso a Bollicine Carlo Scarpa Venini & C. 1932 Measures: height cm 34, diameter cm 25 XVIII Biennale di Venezia del 1932 Bibliography: Murano Mi...

In 1921 Venini and Cappellin opened a glass factory called Vetri Soffiati Muranesi Cappellin Venini & C. on the islands of Murano, the historic glass production centre in the lagoon of Venice, Italy. With Luigi Ceresa and Emilio Hochs as investors, they arranged to purchase the recently closed Murano glass factory of Andrea Rioda, hire the former firm's glassblowers, and retain Rioda himself to serve as technical director of the venture. Venini embarked on collaborations with architects and designers such as Cini Boeri, Tomaso Buzzi, Gio Ponti, Carlo Scarpa, Ettore Sottsass, Tapio Wirkkala, Gae Aulenti, and Massimo Vignelli. The ethos was to "take the Murano tradition of glass blowing and combine it with the French fashion industry's tradition of using designers". Here you can see a small lattimo vase "a mezza filigrana" realized by Venini on Carlo Scarpa...

Elegant sommerso a bollicine Murano glass bowl, designed by Carlo Scarpa for Venini. Hundreds of air bubbles in the case glass form create a light-catching...

Set of four "Rialto" bookcases by Carlo Scarpa for Gavina. "In the early 1970s, Carlo Scarpa designed this model for his home. After three years of "enjoyable" discussions, Gavina ...

Beautiful antique Murano hand blown Sommerso clear bubbles in champagne or caramel color with gold flecks Italian art glass ashtray. Documented to Venini company, and created by mast...

Countless Black and Coral pieces are woven together to form a symmetric yet imperfect pattern on slanted surfaces. VENINI’s glass grinding technique crea...

Ancient murrine form the pattern of a snake coiling up on glass. Conceived, redesigned and skilfully reinterpreted with rich contrasting colours, they reflect the highest craftsmansh...

Countless Black and Coral pieces are woven together to form a symmetric yet imperfect pattern on slanted surfaces. VENINI’s glass grinding technique creates a typical shading effect ...

Ancient murrine form the pattern of a snake coiling up on glass. Conceived, redesigned and skilfully reinterpreted with rich contrasting colours, they reflect the highest craftsmansh...

Model "Samo" table oval slab of clear glass on travertine frame designed by Carlo Scarpa and edited by Simon. Italy, 1970s. Particular version made with natural beige travertine, and...

In these murrineworks, purity of form and essential geometry blend together to create rare, precious and timeless objects, just like the art of ancient Rome. In his quest for new gla...

In these murrineworks, purity of form and essential geometry blend together to create rare, precious and timeless objects, just like the art of ancient Rome. In his quest for new gla...

Called "Poliedri" in Italian and known as "Polyhedral" in English, this design was created by Carlos Scarpa (1906-1978) for Venini when he was their art...

Valmanara table designed in 1971 by italian architect Carlo Scarpa for Simon International-Gavina. Oak wood with cerused varnish finish.

Poliedri 951.27 APPLIQUE CR Additional Information: Color: Crystal Light Source: 2 x max 8W LED E14 Finishes: Chrome metal Dimensions: W 27 x D 27 x H 39 cm.

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

Alternating light and dark coloured lines on shades of Coral, harmoniously following the guidelines produced by Carlo Scarpa. And reproduced by VENINI’s master glassblowers by using ...

In these murrineworks, purity of form and essential geometry blend together to create rare, precious and timeless objects, just like the art of ancient Rome. In his quest for new gla...

The liveliness of sea bubbles meets the murmur of bright red sand waves on the surface of this work. The raw power of the elements enclosed in an archaic shape recalling a small tali...

Countless Black and Coral pieces are woven together to form a symmetric yet imperfect pattern on slanted surfaces. VENINI’s glass grinding technique creates a typical shading effect ...

Heavy Vetro Sommerso Vase by Carlo Scarpa for Venini Murano ca. 1930s A vetro sommerso bollicine vase designed by Carlo Scarpa between 1934 and 1...

Carlo Scarpa's "Battuto" vase designed in 1940 in a transparent red glass finished with deeply ground horizontal marks. Acid signed VENINi MURANO. Model n° 3790 in the Blue Catalogue.

Alternating light and dark coloured lines on shades of Coral, harmoniously following the guidelines produced by Carlo Scarpa. And reproduced by VENINI’s master glassblowers by using ...

Poliedri applique, suspension lamp and wall sconce, designed by Carlo Scarpa and manufactured by Venini, were originally designed in 1958. Indoor use only. Dimensions: Ø 81 cm, H...

If you like vintage lighting then you will love this glass sconces by Carlo Scarpa for Venini. Designed with four vertical tubes and metal centre with one E14 bulb. In full working ...

Inspired by nature and designed by Carlo Scarpa, it turns into Battuto a Nido D'Ape only in the hands of master glassmakers, who skilfully shape glass into a honeycomb pattern using ...

Inspired by nature and designed by Carlo Scarpa, it turns into Battuto a Nido D'Ape only in the hands of master glassmakers, who skilfully shape glass into a honeycomb pattern using ...

Countless black and coral pieces are woven together to form a symmetric yet imperfect pattern on slanted surfaces. VENINI’s glass grinding technique creates a typical shading effect ...

Oval travertine dining table by the Italian Architect Carlo Scarpa, designed during the 1970s. With its sculptural pedestal base and polished travertine table top this piece is Scarpa’s modern take on Classic architecture. A striking centrepiece in any space. The table separates...

This is a set of Carlo Scarpa armachairs designed and realized for the Auditorium in Rome, project by the Italian architect Marcello Piacentini, bu...

Set of 2 glass wall lamps by Carlo Scarpa for Venini, Italy, mid-century Sold and priced individually Impressive 22" wall lamps with clear textured glass and slightly yellowish gla...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

A beautiful Corroso a Bugne vase by Carlo Scarpa for Venini. With acid signature "Venini Murano" Literature: "Venetian Art Glass: An American Collection 1840 - 1970", Barovier, pag...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

Mid-Century Modern oval travertine dining room table, model Argo. Designed in 1970 by Carlo Scarpa (1906-1978) for the "Ultrarazionale" collection, produced and sold by Cattelan Ital...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

rare huge and majestic chandelier by venini, design carlo scarpa, made by 205 poliedri transparent glasses, with 19 bulb holder height 1 meter, diameter cm 70. no lost poliedri, on...

Carlo Scarpa ceiling lamp 1938 Ceiling lamp designed by Carlo Scarpa and manufactured by Venini Murano Clear and Lattimo “ a fasce” gla...

An innovative designer with a passion for experimentation, Carlo Scarpa turned this work into the utmost expression of his artistic and artisanal knowledge. The linearity of glass me...

Lattimo Velato vase by Carlo Scarpa for Venini Murano ca. 1936 A rare lattimo velato vase designed by Carlo Scarpa ca. 1936. Manufactured by Venini Murano Venice in the 1930s. Thin ...

Suspension lamp model “Poliedri” designed by Carlo Scarpa, edited by Venini. Composed by Murano crystal pieces over a structure made in white lacquer metal. Italy 1950. Excellent vi...

Venini’s artistic director for more than a decade, Carlo Scarpa deeply influenced the company’s production, managing to merge his own intellectual vision with the highly refined tech...

Italian modern Wooden and glass Bookcase mod. Zibaldone by Carlo Scarpa for Bernini, 1974 Bookcase mod. Zibaldone with structure in veneered wood and glass. This particular bookcase ...

Fabulous original Venini Poliedri chandelier by Carlo Scarpa. Rare combination of light pink and Ice colored Murano glass. Chrome frame in very good original condition. Available ...

Carlo Scarpa "Samo" oval table for Simon Gavina, granite, Italy, 1971. The Scarpa's way of thinking the architecture is particularly visible in this piece. The “Samo” dining table designed in 1971 for 'Ultrarazionale' collection by Simon Gavina consists of two grooved solid granite pillars...

The Scarpa's way of thinking the architecture is particularly visible in this piece. The “Samo” dining table, designed in 1971 for 'Ultrarazionale' collection by Simon Gavina, consists of two grooved solid Granite pillars...

The perfume Bottle by Carlo Scarpa (1906-1978) circa 1928-29 for MVM Cappellin company was formed in 1925 by Paolo Venini and Giacomo Cappellin. The bottle was hand blown into a heart shaped transparent and translucent emerald green glass. There is an applied ‘v’ shaped belt around the girth of the bottle that continues to the foot. The model no. 018 and the acid stamp 'MVM Cappellin Murano...

Venini Murrine Romane vase in multi-color by Carlo Scarpa. Numbered Edition. These Murrine are called “roman” due to their graphic signs and because the...

Stunning white Carrara marble dining table, model Samo, designed by Carlo Scarpa and Manufactured by Simon, Italy 1970s. It is an original design by the Italian designer / architec...