Can-Can Dining Table, Glass or Ceramic Top, Glass or Wooden Legs by Mario Milana

Giro is a rotating disk system dining table for the convivial experience to serve and share food. The plane is divided in three different circular elements that rotate independently ...

The ASANA is a floor seat with an aim to take us closer to the earth and facilitate physical and mental balance. In the sanskritic yoga tradition asana means “the posture that brings...

The dePostura dining chair is characterised by its arches. The three ways bent rear frames creates a spring that allows the backrest to give constant support to the lumbar back, main...

On the fair play sofa, the backrest is made up of upholstered modules that rotate vertically, allowing them to also be used as armrests at any point along this piece. The side struct...

The BiS lounge chair strips down the stereotypical armchair to its most essential elements. The three ways bent rear metal structure creates a “spring” that allows the backrest to give both lumbar and upper back support, moving with the back of the user. The top circle cushion...

The arches of the Rulla rocking chair's frame create a spring on which the cushy circular backrest is mounted. On top of it the two rolls function as a headrest that gently cradles a...

The dining table in stratified glass Can Can is made of a clean and linear structure. The supporting legs are made of glass, too and enhance the shape of the top. The stratified top of Can Can table...

Dining table model "Table B" 90cm x 180cm The Table B, which inaugurated the Extrusions Collection in 2009, can reach up to five metres using a simple profile of extruded aluminium. Its apparent simplicity covers a complex technical development where important engineers have participated. The result is a piece of excelling craftsmanship, carrying the German designers character. Silver Delta Award 2009 winner. AVAILBLE MEASUREMENTS 240 x 120 x h. 74cm 300 x 120 x h. 74cm 360 x 120 x h. 74cm 400 x 120 x h. 74cm 500 x 120 x h. 74cm MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. Konstantin Grcic (1965) was trained as a cabinet maker at The John Makepeace School for Craftsmen in Wood before studying Design at the Royal College of Art in London. He set up his own office in Munich in 1991. Today, Konstantin Grcic Design GmbH is based in Berlin. The office operate in diverse fields ranging from industrial design projects, exhibition design and architectural collaborations. Amongst his renowned clients are Aeance, Authentics, Cassina, ClassiCon, Flötotto, Flos, Galerie Kreo, Kettal, Laufen, Magis, Muji, Nespresso, Plank, Smart and Vitra. He is the recipient of numerous awards such as the Compasso d`Oro for his MAYDAY lamp...

Dinning Table B 90cm x 200cm The Table B, which inaugurated the Extrusions Collection in 2009, can reach up to five metres using a simple profile of extruded aluminium. Its apparent simplicity covers a complex technical development where important engineers have participated. The result is a piece of excelling craftsmanship, carrying the German designers character. Silver Delta Award 2009 winner. AVAILABLE MEASUREMENTS 240 x 120 x h. 74cm 300 x 120 x h. 74cm 360 x 120 x h. 74cm 400 x 120 x h. 74cm 500 x 120 x h. 74cm MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. Konstantin Grcic (1965) was trained as a cabinet maker at The John Makepeace School for Craftsmen in Wood before studying Design at the Royal College of Art in London. He set up his own office in Munich in 1991. Today, Konstantin Grcic Design GmbH is based in Berlin. The office operate in diverse fields ranging from industrial design projects, exhibition design and architectural collaborations. Amongst his renowned clients are Aeance, Authentics, Cassina, ClassiCon, Flötotto, Flos, Galerie Kreo, Kettal, Laufen, Magis, Muji, Nespresso, Plank, Smart and Vitra. He is the recipient of numerous awards such as the Compasso d`Oro for his MAYDAY lamp...

Table model "Table B" 90 X 220CM Konstantin Grcic Anodized silver aluminium The Table B, which inaugurated the Extrusions Collection in 2009, can reach up to five metres using a simple profile of extruded aluminium. Its apparent simplicity covers a complex technical development where important engineers have participated. The result is a piece of excelling craftsmanship, carrying the German designers character. Silver Delta Award 2009 winner. MEASUREMENTS 240 x 120 x h. 74cm 300 x 120 x h. 74cm 360 x 120 x h. 74cm 400 x 120 x h. 74cm 500 x 120 x h. 74cm MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. MATERIALS AND FINISHES Top in extruded, scotch polished and anodized silver aluminium. Surface laminating available in matte from Fenix or natural oak (Oberflex). Legs in architectural concrete in grey with steel concrete base fastening plate painted in epoxy polyester, silver color, for both interior and exterior use. Konstantin Grcic (1965) was trained as a cabinet maker at The John Makepeace School for Craftsmen in Wood before studying Design at the Royal College of Art in London. He set up his own office in Munich in 1991. Today, Konstantin Grcic Design GmbH is based in Berlin. The office operate in diverse fields ranging from industrial design projects, exhibition design and architectural collaborations. Amongst his renowned clients are Aeance, Authentics, Cassina, ClassiCon, Flötotto, Flos, Galerie Kreo, Kettal, Laufen, Magis, Muji, Nespresso, Plank, Smart and Vitra. He is the recipient of numerous awards such as the Compasso d`Oro for his MAYDAY lamp...

Simple and elegant, this MCM table will make a great desk, writing, dining or conference table. The metal frame has a gold tone to give it extra style and presence. Add your favorit...

The biomorphic forms of the elegant Stellarnova legs are inspired by nature and sand cast in recycled aluminium or bronze in a fully sustainable closed-loop factory. Designed with a ...