Do I have to wind a Rolex?

No, you don’t have to wind a Rolex watch as long as you are wearing it regularly. Rolex watches feature a Perpetual rotor that collects energy from the wrist’s movement and converts it into power for the watch. Browse a collection of expertly authenticated Rolex watches from top sellers on 1stDibs.

There are a couple definitions for the term tin bath. One refers to a bath that’s filled with molten or liquid tin that’s used in the production of glass. The other two definitions refer to bathtubs, either made of tin or galvanized iron. Today, many people like to use galvanized iron bathtubs as decorative planters. On 1stDibs, find tin baths from top sellers around the world.

How do you wind up a Rolex watch?

Most Rolex watches use a Perpetual rotor which means that they do not need winding if worn regularly. If you have not worn your watch in some time, you can manually wind it by unscrewing the crown to the winding position and turning it clockwise about 20 times. Make sure to screw the crown back into place after winding to reestablish its waterproof qualities. Shop a collection of authentic Rolex watches from some of the world’s top boutiques on 1stDibs.

How do I wind a Piaget watch?

To wind a Piaget watch, pull out the winding crown located on the side. Turn it clockwise until you detect resistance. For a full wind, you will normally need to twist about 20 times. On 1stDibs, find a range of Piaget watches.

What is a North Wind chair?

North Wind chairs feature a mythical figure, such as a fantasy creature or animal, carved into the top back. The chair was meant to protect a space from evil spirits. On 1stDibs, find a selection of North Wind chairs from some of the world’s top sellers.

How to wind a datejust rolex?

To wind a Rolex Datejust, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a wide selection of Rolex Datejust watches on 1stDibs.

How do I wind a Rolex Datejust?

To begin to wind a Rolex Datejust, unscrew the winding crown fully. Then, turn the crown in a clockwise direction at least 25 times for a partial winding. Because the watch self-winds as you move, you usually only need to wind a Rolex Datejust before the first wear or if you let several days pass between wears. You’ll find a large selection of Rolex Datejust watches on 1stDibs.

How does a wind-up toy work?

How a wind-up toy works relies on a part called a torsion spring. When you turn the knob or key, tension builds up on the torsion spring. When you stop winding, the accumulated energy sets an inner gear in motion that powers the movement of the toy. Find a collection of antique and vintage wind-up toys on 1stDibs.

What is a Gone With the Wind lamp?

Gone With the Wind lamps are chamber or hurricane lamps. They are characterized by their hand-painted globes with decorative floral motifs. Shop a collection of antique Gone With the Wind lamps from some of the world’s top boutiques on 1stDibs.

How do I wind a Rolex watch?

To wind a Rolex watch, first fully unscrew the winding crown. Once it is in a raised position, carefully turn the crown clockwise. Most watches require 25 turns for enough winding to begin powering the watch. The instructions included with Rolex watches provide more information about how to wind specific models. Shop a large collection of Rolex watches on 1stDibs.

How do I wind a Rolex Oyster?

To wind a Rolex Oyster, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a selection of well-vetted Rolex Oyster watches on 1stDibs.

How do you wind an Elliott clock?

To wind an Elliott clock, first, find the slot in the back. Insert the key or crank and turn until the winding mechanism doesn't move anymore. Avoid forcing the mechanism any further to prevent damage. On 1stDibs, shop a range of clocks from some of the world's top sellers.

How do I wind a banjo clock?

To wind a banjo clock, insert the key into the winding point. Turn the key in a clockwise fashion until the winding mechanism disengages. If you no longer have the winding key, see an experienced clock repair shop for assistance. You'll find a variety of banjo clocks on 1stDibs.

What are wind-up toys called?

Wind-up toys are sometimes called mechanical toys or clockwork toys. The earliest examples date back to 15th-century Germany, where Karel Grod produced a number of mechanical toys. Shop a collection of antique vintage wind-up toys on 1stDibs.

When were wind up dolls invented?

There are legends and evidence of wind-up toys and sculptures dating back to antiquity, but modern wind-up dolls were being made in large quantities by the 19th century. Shop a collection of antique wind-up toys from some of the world’s top sellers on 1stDibs.

What are biscuit tins made out of?

Biscuit tins are usually made out of steel and plated with tin. The plating is what gives the storage containers their name. Traditionally, people used biscuit tins to keep biscuits and other small baked goods fresh. Shop a collection of vintage and antique biscuit tins on 1stDibs.

How did they empty tin baths?

To empty a tin bath, people worked by hand. After bathing, someone would use a bucket or other container to remove the water. This usually meant making many trips outdoors to dump the water. Shop a selection of tin bath tubs on 1stDibs.

How do I wind an Ansonia mantel clock?

To wind an Ansonia mantel clock, first insert the key into the center winding point, usually found on the back. Then, turn the key clockwise until the winder no longer turns. Repeat the process in the right winding point to set the quarter-hour charm and the left winding point to set the hour strike. You'll find a range of Ansonia clocks on 1stDibs.

How do I wind a Vacheron Constantin watch?

To wind a Vacheron Constantin, turn the winding crown clockwise until you sense some resistance. Typically, manual-winding watches require daily winding. You usually won't have to wind a self-winding timepiece unless you do not wear it for a day or two. Shop a range of Vacheron Constantin watches on 1stDibs.

How do I manually wind a Patek Philippe?

To manually wind your Patek Philippe watch, locate the crown and rotate it clockwise 30 to 40 times. Stop as soon as you feel resistance to avoid overwinding — this is important, as overwinding can potentially damage your watch. Find an assortment of vintage manual Patek Philippe watches on 1stDibs.

Tin Wind Up

Antique Airplane Propeller

Tin Carousel

Disney Tin

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind Up Toy by Lindstrom, "Dancing Katinka" American, Circa 1930

H 8 in W 3 in D 3 in

"Drummer Boy" Tin-wind-up Toy by Louis Marx, New York City, circa 1940's

By Louis Marx and Company

Located in Incline Village, NV

This 1940's "Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on the

Category

Vintage 1940s American Folk Art Toys and Dolls

Materials

Tin

"Drummer Boy" Tin-wind-up Toy by Louis Marx, New York City, circa 1940's

H 9 in W 3.13 in D 3.5 in

"Komikal Kop" Tin Wind-Up Toy by Louis Marx Co., circa 1930

By Louis Marx and Company

Located in Incline Village, NV

on the running board of the auto. The tin lithographed and hand painted wind-up toy by the Louis Marx

Category

Vintage 1930s Folk Art Toys

Materials

Tin

"Komikal Kop" Tin Wind-Up Toy by Louis Marx Co., circa 1930

H 6.5 in W 3 in D 8 in

Vintage Tin Wind-up Toy "Doughboy" by J.Chein Company. American Circa 1930

By J. Chein & Co.

Located in Incline Village, NV

tin toy depicts a World War I "Doughboy" or American infantryman wearing his back pack and green

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind-up Toy "Doughboy" by J.Chein Company. American Circa 1930

H 6 in W 2.75 in D 2.75 in

Vintage Tin Wind Up Toy "Boy Skier" by J. Chein & Co. American Circa 1950

By J. Chein & Co.

Located in Incline Village, NV

Very nice condition all tin, vintage wind up toy by J. Chein Company, New York City, circa 1950

Category

Vintage 1950s American Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind Up Toy "Boy Skier" by J. Chein & Co. American Circa 1950

H 5.25 in W 3.13 in D 7.75 in

Vintage Tin Wind-up Toy "Clown in A Barrel" by J Chein & Co. American Circa 1935

By J. Chein & Co.

Located in Incline Village, NV

smiling face. The toy works great; simply wind the attached key wind in the back 1/2 revolution; place

Category

Vintage 1930s Folk Art Toys and Dolls

Materials

Tin

Vintage Tin Wind-up Toy "Clown in A Barrel" by J Chein & Co. American Circa 1935

H 7.25 in W 3.25 in D 4 in

Li'l Abner Tin Lithograph Mechanical Wind-Up Piano Band Toy

By Unique Art Manufacturing Co.

Located in Fulton, CA

Dogpatch Band” . In excellent, original working condition. Tin wind up toy featuring Li'l Abner as singer

Category

Vintage 1940s American Toys and Dolls

Materials

Tin

Li'l Abner Tin Lithograph Mechanical Wind-Up Piano Band Toy

H 8 in W 9.5 in D 5.5 in

"B.O. Plenty" Vintage Wind-Up Tin Toy by Marx Original Box. American, Circa 1935

By Louis Marx and Company

Located in Incline Village, NV

"B.O. Plenty (printed on the back) is the name of this American made tin wind-up toy; named after

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"B.O. Plenty" Vintage Wind-Up Tin Toy by Marx Original Box. American, Circa 1935

H 8.5 in W 2.75 in D 2.5 in

Vintage "Masuyama" Lehman Wind-Up Toy. German, Circa 1913 Rare

By E.P. Lehman Co.

Located in Incline Village, NV

Early 1900's German hand painted and lithographed tin wind-up toy, by premier tin and whimsical

Category

Vintage 1910s German Folk Art Toys and Dolls

Materials

Tin

Vintage "Masuyama" Lehman Wind-Up Toy. German, Circa 1913 Rare

H 5.75 in W 3 in D 8 in

"Boy Riding a Turtle" Wind-Up Toy; by J. Chein, circa 1930s

By J. Chein & Co.

Located in Incline Village, NV

By J. Chein, circa 1930, this tin lithographed and hand painted American tin wind-up toy is all

Category

Vintage 1930s American Folk Art Toys

Materials

Tin

"Boy Riding a Turtle" Wind-Up Toy; by J. Chein, circa 1930s

H 4 in W 4.5 in D 8 in

Vintage Pre-War Wind-Up Toy "Boy on Motorcycle Delivery Truck" by Marx

By Louis Marx and Company

Located in Incline Village, NV

This brightly lithographed tin wind-up toy in colors of red, yellow, and blue, with a driver

Category

Vintage 1930s Folk Art Toys

Materials

Tin

Vintage Pre-War Wind-Up Toy "Boy on Motorcycle Delivery Truck" by Marx

H 5.75 in W 5.38 in D 9.88 in

'Rajputana' Tin & Celluloid Wind Up Japanese Toy

Located in Hamilton, Ontario

Vintage Japanese tin and celluloid wind up toy. When you wind this toy the top spins around while

Category

20th Century Japanese Toys and Dolls

Materials

Tin

'Rajputana' Tin & Celluloid Wind Up Japanese Toy

H 6.75 in W 3.5 in D 10.5 in

Vintage Toy Wind-Up Speed Boat with Driver by Lindstrom Toy Co., American 1933

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

1933 or earlier; the Lindstrom company having been founded in 1913, made quality tin wind-up toys until

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up Speed Boat with Driver by Lindstrom Toy Co., American 1933

H 3.25 in W 3 in D 12.5 in

Vintage Toy Wind-Up "Baby L" Speedboat by Lindstrom Toy Co., American Circa 1933

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

1933 or earlier; the Lindstrom company having been founded in 1913, made quality tin wind-up toys until

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up "Baby L" Speedboat by Lindstrom Toy Co., American Circa 1933

H 3.13 in W 3 in D 10.5 in

Marx Toys Cowboy in Jeep Tin Lithograph Wind-Up Toy

By Marx Toy Co.

Located in Fulton, CA

1950's Marx Toys tin lithograph and plastic wind-up Jeep with Cowboy driver. Notice cowboy boots

Category

Mid-20th Century American Toys and Dolls

Materials

Tin

Marx Toys Cowboy in Jeep Tin Lithograph Wind-Up Toy

H 6.5 in W 6 in D 3.75 in

Vintage Wind-Up Tin Toy Motorcycle with Co-Driver and Key

Located in Schagen, NL

Vintage Wind-up Tin Toy Motorcycle with Co-driver and key. The piece comes from ca. the 1950s and

Category

Vintage 1950s Industrial Toys and Dolls

Materials

Tin

Vintage Wind-Up Tin Toy Motorcycle with Co-Driver and Key

H 5.12 in W 4.73 in D 7.09 in

Vintage Mechanical tin plated wind up Sparrow Bird toy - 1960's - China

Located in EINDHOVEN, NL

Vintage wind-up Sparrow toy with a mechanical tinplated clockwork mechanism - 1960s Manufactured in

Category

Late 20th Century Mid-Century Modern Toys and Dolls

Materials

Metal, Sheet Metal, Tin

Vintage Mechanical tin plated wind up Sparrow Bird toy - 1960's - China

H 21.66 in W 15.75 in D 4.73 in

Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930

By J. Chein & Co.

Located in Incline Village, NV

This is one of the earlier, New York City based, J. Chein Company, tin toy pieces. They started

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Early Vintage Chein Company All Tin Toy Wind-Up Limousine, American, Circa 1930

H 3 in W 3.5 in D 7.25 in

Vintage Wind Up Tin Toy "Monkey Riding A Horse" by Haji Co., Japan, Circa 1958

Located in Incline Village, NV

Made in Tokyo, Japan by The Haji Company (see image for mark/logo), this all tin vintage wind up

Category

Vintage 1950s Japanese Folk Art Toys and Dolls

Materials

Tin

Vintage Wind Up Tin Toy "Monkey Riding A Horse" by Haji Co., Japan, Circa 1958

H 5.5 in W 2.25 in D 6 in

"George The Drummer Boy" Tin windup Toy by Louis Marx, New York City. Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

This circa 1930 "George, Drummer Boy" brightly colored lithographed tin wind-up toy capitalizes on

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"George The Drummer Boy" Tin windup Toy by Louis Marx, New York City. Circa 1930

H 9 in W 3.75 in D 4 in

Marx Toys Key-Wind Tin Lithograph "Jalopy" Toy Car with Box

By Marx Toy Co.

Located in Fulton, CA

A mechanical wind-up tin lithograph toy car by Marx Toys. "Jalopy" Circa. 1940's. Excellent

Category

Vintage 1940s Toys and Dolls

Materials

Tin

Marx Toys Key-Wind Tin Lithograph "Jalopy" Toy Car with Box

H 4 in W 6.75 in D 5.63 in

Vintage Toy by Lindstrom Dancing Dutch Boy Playing Accordion American Circa 1930

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

Boy" is an all tin wind up toy of American manufacture; made by the Lindstrom Toy Company of

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy by Lindstrom Dancing Dutch Boy Playing Accordion American Circa 1930

H 8 in W 3.25 in D 3.75 in

Vintage Toy, Wind Up Motorcyclist

Located in Roma, IT

This Wind up Motorcyclist is a working toy of unknown production, multi-color rider on a green

Category

Mid-20th Century European Toys

Materials

Metal

Vintage Toy, Wind Up Motorcyclist

H 8.08 in W 7.49 in D 3.55 in

Late 1940s Penny Toy Wind-Up Train, Attributed Japan

Located in Incline Village, NV

Diminutive late 1940s "penny toy like" wind-up tin toy platform train modern and sleek looking for

Category

Vintage 1940s Japanese Folk Art Toys

Materials

Tin

Late 1940s Penny Toy Wind-Up Train, Attributed Japan

H 1 in W 1.5 in D 5.5 in

Vintage Wind-Up Toy, Circa 1950 "Smiling Boy Polishing Boots" Rare

Located in Incline Village, NV

. To operate: hold the toy in the left hand with thumb on chest and then; wind up attached original key

Category

Vintage 1950s Japanese Folk Art Toys

Materials

Composition, Tin

Vintage Wind-Up Toy, Circa 1950 "Smiling Boy Polishing Boots" Rare

H 7 in W 3.5 in D 3.5 in

Original Vintage Toy, Wind Up Circus Performer, 1930s

Located in Roma, IT

This Wind up Circus Performer is an original vintage toy. Vintage wind up mechanical toy

Category

Early 20th Century French Toys

Materials

Metal

Original Vintage Toy, Wind Up Circus Performer, 1930s

H 4.73 in W 1.97 in D 2.76 in

"Kadi" Pre-war Wind-Up Toy by Lehman Company. Germany Circa 1905

By E.P. Lehman Co.

Located in Incline Village, NV

smoother and better made than those examples seen in later wind up toy manufacturing. The "Kadi" Lehman

Category

Antique Early 1900s German Folk Art Toys and Dolls

Materials

Tin

"Kadi" Pre-war Wind-Up Toy by Lehman Company. Germany Circa 1905

H 5.5 in W 2.5 in D 7.25 in

Vintage Toy Wind-Up "Johnny" The Dancing Clown by Lindstrom Toy Co., Circa 1930

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

This is a hard to find pre war vintage, Made in America wind up tin toy by The Lindstrom Toy

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up "Johnny" The Dancing Clown by Lindstrom Toy Co., Circa 1930

H 8 in W 3.13 in D 3 in

Antique Toy Wind-Up Double Decker Bus by Ferdinand Strauss Toy Co. Circa 1925

By STRAUSS

Located in Incline Village, NV

Antique Wind-Up Double Decker open air bus by the Ferdinand Strauss Toy Company, New York; circa

Category

Vintage 1920s American Folk Art Toys and Dolls

Materials

Tin

Antique Toy Wind-Up Double Decker Bus by Ferdinand Strauss Toy Co. Circa 1925

H 6 in W 5.5 in D 10.5 in

German Tinplate Clockwork Wind Up Toy by the Lehman Co. "Balky Mule" Circa 1909

By E.P. Lehman Co.

Located in Incline Village, NV

" by Jurgen & Marianne Cieslik, published in 1982. To operate the toy; wind up the attached clockwork

Category

Antique Early 1900s German Folk Art Toys and Dolls

Materials

Tin

German Tinplate Clockwork Wind Up Toy by the Lehman Co. "Balky Mule" Circa 1909

H 5 in W 3 in D 7.5 in

Wind Ups Tin Toy Dreams T. Kitahara Collection, Teruhisa Kitahara, First Edition

Located in valatie, NY

Wind Ups: Tin Toy Dreams T. Kitahara Collection by Teruhisa Kitahara. Chronicle Books, 1985

Category

Vintage 1980s American Books

Materials

Paper

Wind Ups Tin Toy Dreams T. Kitahara Collection, Teruhisa Kitahara, First Edition

H 10.25 in W 7.25 in D 0.25 in

"Joe Penner" Vintage Clockwork Windup Toy by Louis Marx Co American Circa 1930's

By Louis Marx and Company

Located in Incline Village, NV

Fabulous American vintage all tin wind-up toy with attached key and clockwork mechanism, whereby

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"Joe Penner" Vintage Clockwork Windup Toy by Louis Marx Co American Circa 1930's

H 8.5 in W 4.5 in D 4.75 in

Walt Disney Enterprises "Pinocchio" Wind-Up Toy by Marx Toy Co., N.Y. Dated 1939

By Louis Marx and Company

Located in Incline Village, NV

(labeled---see image) vintage wind-up toy of the iconic Disney character "Pinocchio", dated "1939". Clearly

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Walt Disney Enterprises "Pinocchio" Wind-Up Toy by Marx Toy Co., N.Y. Dated 1939

H 8.5 in W 3 in D 3 in

Vintage Toy, Wind up Clown on Cart and Donkey, 1960s

Located in Roma, IT

This wind up clown on cart and donkey is a vintage wind up toy representing a multicolor clown in a

Category

Mid-20th Century Russian Toys

Materials

Metal

Vintage Toy, Wind up Clown on Cart and Donkey, 1960s

No Reserve

H 5.12 in W 7.49 in D 3.55 in

"Boy Riding An Alligator" Vintage Wind-Up Toy by J. Chein Co., N.J., Circa 1935

By J. Chein & Co.

Located in Incline Village, NV

Manufactured circa 1935 by The J. Chein Company in Harrison, New Jersey, this vintage tin toy, when

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

"Boy Riding An Alligator" Vintage Wind-Up Toy by J. Chein Co., N.J., Circa 1935

H 3.5 in W 3.25 in D 15 in

Vintage Toy Wind-Up Dump Truck by The Marx Toy Company, N.Y. American Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

tin. Capability to raise and lower the bed is activated by rotating the attached axle and rotating it

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Tin

Vintage Toy Wind-Up Dump Truck by The Marx Toy Company, N.Y. American Circa 1930

H 4 in W 5 in D 11 in

Vintage Toy, Wind Up Boy on Tricycle, Made in Germany, 1930s

Located in Roma, IT

This wind up boy on tricycle is a vintage mechanical toy. Vintage wind up mechanical toy

Category

Early 20th Century German Toys

Materials

Metal

Vintage Toy, Wind Up Boy on Tricycle, Made in Germany, 1930s

H 4.53 in W 2.56 in D 2.17 in

Vintage Toy, Wind up Locomotive Ingap 67001, Made by Ingap, 1920s

Located in Roma, IT

This wind up locomotive Ingap 67001 is a vintage toy representing a red mechanical locomotive

Category

Early 20th Century Italian Toys

Materials

Metal

Vintage Toy, Wind up Locomotive Ingap 67001, Made by Ingap, 1920s

No Reserve

H 4.53 in W 9.45 in D 3.75 in

Collection of 12 Vintage Tin lithograph Toys

By Louis Marx and Company

Located in Redding, CT

Collection of 12 vintage tin lithograph lithograph toys. $400 for the entire collection. Price is

Category

Vintage 1960s German Toys

Materials

Tin

Collection of 12 Vintage Tin lithograph Toys

H 12 in W 11 in D 8 in

Vintage Toy, Wind up Locomotive Wells-Brimtoy 7040, by Wells-Brimtoy, 1930s

Located in Roma, IT

This Wind up Locomotive Wells-Brimtoy 7040 is an originale mechanical toy. Vintage wind up toy

Category

Early 20th Century English Toys

Materials

Metal

Vintage Toy, Wind up Locomotive Wells-Brimtoy 7040, by Wells-Brimtoy, 1930s

H 3.55 in W 6.7 in D 2.56 in

Vintage Toy, Marx Toys Wind Up Chariot and Horses, Mid-20th Century

By Marx Toy Co.

Located in Roma, IT

This Marx Toys Wind up Chariot and Horses is a vintage mechanical toy representing a red chariot

Category

Mid-20th Century American Toys

Materials

Metal

Vintage Toy, Marx Toys Wind Up Chariot and Horses, Mid-20th Century

H 4.93 in W 10.83 in D 4.53 in

Marx "Wonder Cyclist" American Circa 1930

By Louis Marx and Company

Located in Incline Village, NV

and more sought after by collectors of early tin wind up toys. Rather than lithographed wheels these

Category

Antique 1830s American Folk Art Toys and Dolls

Materials

Metal

Marx "Wonder Cyclist" American Circa 1930

H 9 in W 4.75 in D 8.25 in

Vintage Free Wheeling Green Lithographed All Tin Racing Car. French, Circa 1930

Located in Incline Village, NV

Circa 1930's free wheeling green lithographed all tin racing car, with attached pressed steel

Category

Vintage 1930s French Folk Art Toys and Dolls

Materials

Tin

Vintage Free Wheeling Green Lithographed All Tin Racing Car. French, Circa 1930

H 2.5 in W 2.5 in D 8.25 in

"Walking Popeye" With Parrots Vintage Windup Toy by Marx Toy Co.

By Louis Marx and Company

Located in Incline Village, NV

collection of American and German tin clockwork and wind up toys; recently acquired. Note: After 40 plus

Category

Vintage 1930s Art Deco Toys and Dolls

Materials

Tin

"Walking Popeye" With Parrots Vintage Windup Toy by Marx Toy Co.

H 8.5 in W 2.75 in D 3 in

Tipp & Co Clockwork Motorcycle With Rider & Pillion Passenger

Located in Oxfordshire, GB

Tipp & Co. Toy Clockwork Tinplate Motorcycle. A rare, desirable, tinplate wind-up motorcycle by the

Category

Vintage 1920s Sporting Art Toys and Dolls

Materials

Tin

Tipp & Co Clockwork Motorcycle With Rider & Pillion Passenger

Free Shipping

H 6.7 in W 9.45 in D 1.97 in

"Dancing Dog" Vintage Windup Toy. American, Circa 1925

By Lindstrom Tool & Toy Company 1

Located in Incline Village, NV

with no repairs or repaint. It works perfectly and is quite amusing. To operate; wind up the attached

Category

Vintage 1920s American Folk Art Toys and Dolls

Materials

Tin

"Dancing Dog" Vintage Windup Toy. American, Circa 1925

H 4 in W 2.25 in D 5.25 in

(4) Early Vintage All Original Toy Cars. Porsche, Limo, Lehman Sedan, Race Car

Located in Incline Village, NV

available on request (they display operation). 1) Early Vintage Chein Company All Tin Toy Wind-Up

Category

Early 20th Century Unknown Folk Art Toys and Dolls

Materials

Tin

(4) Early Vintage All Original Toy Cars. Porsche, Limo, Lehman Sedan, Race Car

H 14 in W 14 in D 14 in

Mechanical Bank "Child's Clock Bank" Japan, circa 1950s

By Marusan

Located in Incline Village, NV

1950's; this all tin bank is known as (according to the graphics on the original box) "The Child Clock

Category

Vintage 1950s Japanese Folk Art Toys and Dolls

Materials

Tin

Mechanical Bank "Child's Clock Bank" Japan, circa 1950s

H 8.5 in W 4.75 in D 2.38 in

Lehman Auto "Ito" Sedan, Germany, circa 1913

By E.P. Lehman Co.

Located in Incline Village, NV

This hand-painted German tin toy was manufactured by the "Lehman Toy Company" in Brandenburg

Category

Vintage 1910s German Folk Art Toys

Materials

Tin

Lehman Auto "Ito" Sedan, Germany, circa 1913

H 3.5 in W 3 in D 7 in

Antique Mickey Mouse & Minnie Mouse Train Hand Car by Disney & Lionel Circa 1934

By Walt Disney

Located in Incline Village, NV

Vintage Mickey/ Minnie Mouse Toy Wind-Up pre-war handcar (train car) circa 1934; by The Lionel

Category

Vintage 1930s American Folk Art Toys and Dolls

Materials

Metal

Antique Mickey Mouse & Minnie Mouse Train Hand Car by Disney & Lionel Circa 1934

H 6 in W 2 in D 9.75 in

“Still Life with Robot” Contemporary Still-life Photo with Vintage Typewriter

Located in Brooklyn, NY

typewriter, opera glasses, wind-up tin toy Roxy Robot, transistor radio in need of repair, and a multi-tool

Category

2010s Contemporary Still-life Photography

Materials

Archival Pigment

Jeanette May
“Still Life with Robot” Contemporary Still-life Photo with Vintage Typewriter, 2023

H 9.25 in W 6.5 in

New Still-life Photograph with Vintage Typewriter, “Still Life with Robot”

Located in Brooklyn, NY

an Olivetti Letter 32 portable typewriter, opera glasses, wind-up tin toy Roxy Robot, transistor

Category

2010s Contemporary Still-life Photography

Materials

Archival Pigment

Jeanette May
New Still-life Photograph with Vintage Typewriter, “Still Life with Robot” , 2023

H 18 in W 12 in

Vintage Toy, The Flyer 1956 Locomotive and Coach, 1956

Located in Roma, IT

The Flyer 1956 locomotive and coach is a rare vintage toy. Vintage wind up tin toy train made of

Category

Mid-20th Century German Toys

Materials

Metal

Vintage Toy, The Flyer 1956 Locomotive and Coach, 1956

H 3.55 in W 8.86 in D 2.37 in

Vintage Toy, Military Toy Truck and Trailer

Located in Roma, IT

This military toy truck and trailer is a wind up toy truck with soldier and its own trailer. Tin

Category

Mid-20th Century European Toys

Materials

Metal

Vintage Toy, Military Toy Truck and Trailer

H 3.75 in W 11.03 in D 3.55 in

Vintage Toy, Small Motorcyclist, Made in Japan, 1960s

Located in Roma, IT

This Wind up Boy on Tricycle is an original vintage toy. Vintage friction toy representing a

Category

Late 20th Century Japanese Toys

Materials

Metal

Vintage Toy, Small Motorcyclist, Made in Japan, 1960s

H 2.37 in W 3.94 in D 1.19 in

Schuco Tin Wind Up Young Man Drinking from German Bisque Stein, circa 1930

Located in Lugano, Ticino

Schuco tin wind up young man drinking from German bisque stein, circa 1930 Made in Germany, pre

Category

20th Century German Toys and Dolls

Schuco Tin Wind Up Young Man Drinking from German Bisque Stein, circa 1930

H 5.52 in W 1.97 in D 1.97 in

1950s Smiling Sam Carnival Man Clown Wind Up Japan Tin Toy

Located in Orange, CA

For your consideration we have a vintage Litho Tin Toy - Smiling Sam the carnival man clown wind up

Category

Vintage 1950s Japanese Toys

Materials

Tin

1950s Smiling Sam Carnival Man Clown Wind Up Japan Tin Toy

H 10 in W 4 in D 4 in

Functional Wind-Up Monkey Toy, U.S. Zone, circa 1950

Located in Lugano, Ticino

Functional and colored wind-up monkey toy, made U.S. ZONE, Germany, circa 1950. Material: Tin and

Category

Vintage 1950s German Toys and Dolls

Functional Wind-Up Monkey Toy, U.S. Zone, circa 1950

H 5.91 in W 3.94 in D 0.79 in

Wolverine Zilotone No. 48 Wind Up Musical Toy, circa 1930s

Located in Lugano, Ticino

, Pittsburgh, PA, circa 1930s; pressed steel and tin toy. Great example to add to your vintage wind-up toy

Category

Vintage 1930s American Toys and Dolls

Wolverine Zilotone No. 48 Wind Up Musical Toy, circa 1930s

H 4.34 in W 7.88 in D 8.27 in

Untitled, acrylic painting on canvas

By Mike Tracy

Located in Santa Monica, CA

wind up tin toys reminiscent of Mickey Mouse and Godzilla. Although painted in a still-life fashion

Category

21st Century and Contemporary Contemporary Figurative Paintings

Materials

Canvas, Acrylic

Mike Tracy
Untitled, acrylic painting on canvas , 2008

H 9.13 in W 9.13 in

Get Updated with New Arrivals

Save "Tin Wind Up", and we’ll notify you when there are new listings in this category.

Tin Wind Up For Sale on 1stDibs

Choose from an assortment of styles, material and more with respect to the tin wind up you’re looking for at 1stDibs. Each tin wind up for sale was constructed with extraordinary care, often using metal, tin and fabric. You’ve searched high and low for the perfect tin wind up — we have versions that date back to the 19th Century alongside those produced as recently as the 20th Century are available. A tin wind up made by folk art designers — as well as those associated with Art Deco — is very popular. Many designers have produced at least one well-made tin wind up over the years, but those crafted by E.P. Lehman Co., His Masters Voice and HMV Cavendish are often thought to be among the most beautiful.

How Much is a Tin Wind Up?

The average selling price for a tin wind up at 1stDibs is $396, while they’re typically $55 on the low end and $12,000 for the highest priced.

Questions About Tin Wind Up

Do I have to wind a Rolex?
1 Answer
1stDibs ExpertApril 5, 2022
No, you don’t have to wind a Rolex watch as long as you are wearing it regularly. Rolex watches feature a Perpetual rotor that collects energy from the wrist’s movement and converts it into power for the watch. Browse a collection of expertly authenticated Rolex watches from top sellers on 1stDibs.
What is a tin bath?
1 Answer
1stDibs ExpertApril 5, 2022
There are a couple definitions for the term tin bath. One refers to a bath that’s filled with molten or liquid tin that’s used in the production of glass. The other two definitions refer to bathtubs, either made of tin or galvanized iron. Today, many people like to use galvanized iron bathtubs as decorative planters. On 1stDibs, find tin baths from top sellers around the world.
How do you wind up a Rolex watch?
1 Answer
1stDibs ExpertApril 5, 2022
Most Rolex watches use a Perpetual rotor which means that they do not need winding if worn regularly. If you have not worn your watch in some time, you can manually wind it by unscrewing the crown to the winding position and turning it clockwise about 20 times. Make sure to screw the crown back into place after winding to reestablish its waterproof qualities. Shop a collection of authentic Rolex watches from some of the world’s top boutiques on 1stDibs.
How do I wind a Piaget watch?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Piaget watch, pull out the winding crown located on the side. Turn it clockwise until you detect resistance. For a full wind, you will normally need to twist about 20 times. On 1stDibs, find a range of Piaget watches.
What is a North Wind chair?
1 Answer
1stDibs ExpertApril 5, 2022
North Wind chairs feature a mythical figure, such as a fantasy creature or animal, carved into the top back. The chair was meant to protect a space from evil spirits. On 1stDibs, find a selection of North Wind chairs from some of the world’s top sellers.
How to wind a datejust rolex?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Rolex Datejust, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a wide selection of Rolex Datejust watches on 1stDibs.
How do I wind a Rolex Datejust?
1 Answer
1stDibs ExpertMarch 22, 2022
To begin to wind a Rolex Datejust, unscrew the winding crown fully. Then, turn the crown in a clockwise direction at least 25 times for a partial winding. Because the watch self-winds as you move, you usually only need to wind a Rolex Datejust before the first wear or if you let several days pass between wears. You’ll find a large selection of Rolex Datejust watches on 1stDibs.
How does a wind-up toy work?
1 Answer
1stDibs ExpertApril 5, 2022
How a wind-up toy works relies on a part called a torsion spring. When you turn the knob or key, tension builds up on the torsion spring. When you stop winding, the accumulated energy sets an inner gear in motion that powers the movement of the toy. Find a collection of antique and vintage wind-up toys on 1stDibs.
What is a Gone With the Wind lamp?
1 Answer
1stDibs ExpertApril 5, 2022
Gone With the Wind lamps are chamber or hurricane lamps. They are characterized by their hand-painted globes with decorative floral motifs. Shop a collection of antique Gone With the Wind lamps from some of the world’s top boutiques on 1stDibs.
How do I wind a Rolex watch?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a Rolex watch, first fully unscrew the winding crown. Once it is in a raised position, carefully turn the crown clockwise. Most watches require 25 turns for enough winding to begin powering the watch. The instructions included with Rolex watches provide more information about how to wind specific models. Shop a large collection of Rolex watches on 1stDibs.
How do I wind a Rolex Oyster?
1 Answer
1stDibs ExpertApril 5, 2022
To wind a Rolex Oyster, set the crown notch (located on the right hand side of the face) to position one. To set it to position one, turn the crown counterclockwise to unscrew the crown and pop the crown out one notch. From this position, start to wind the Rolex by turning the crown clockwise. You should feel a bit of tension and hear a soft clicking sound. Browse a selection of well-vetted Rolex Oyster watches on 1stDibs.
How do you wind an Elliott clock?
1 Answer
1stDibs ExpertFebruary 13, 2023
To wind an Elliott clock, first, find the slot in the back. Insert the key or crank and turn until the winding mechanism doesn't move anymore. Avoid forcing the mechanism any further to prevent damage. On 1stDibs, shop a range of clocks from some of the world's top sellers.
How do I wind a banjo clock?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a banjo clock, insert the key into the winding point. Turn the key in a clockwise fashion until the winding mechanism disengages. If you no longer have the winding key, see an experienced clock repair shop for assistance. You'll find a variety of banjo clocks on 1stDibs.
What are wind-up toys called?
1 Answer
1stDibs ExpertApril 5, 2022
Wind-up toys are sometimes called mechanical toys or clockwork toys. The earliest examples date back to 15th-century Germany, where Karel Grod produced a number of mechanical toys. Shop a collection of antique vintage wind-up toys on 1stDibs.
When were wind up dolls invented?
1 Answer
1stDibs ExpertApril 5, 2022
There are legends and evidence of wind-up toys and sculptures dating back to antiquity, but modern wind-up dolls were being made in large quantities by the 19th century. Shop a collection of antique wind-up toys from some of the world’s top sellers on 1stDibs.
What are biscuit tins made out of?
1 Answer
1stDibs ExpertApril 5, 2022
Biscuit tins are usually made out of steel and plated with tin. The plating is what gives the storage containers their name. Traditionally, people used biscuit tins to keep biscuits and other small baked goods fresh. Shop a collection of vintage and antique biscuit tins on 1stDibs.
How did they empty tin baths?
1 Answer
1stDibs ExpertMarch 22, 2022
To empty a tin bath, people worked by hand. After bathing, someone would use a bucket or other container to remove the water. This usually meant making many trips outdoors to dump the water. Shop a selection of tin bath tubs on 1stDibs.
How do I wind an Ansonia mantel clock?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind an Ansonia mantel clock, first insert the key into the center winding point, usually found on the back. Then, turn the key clockwise until the winder no longer turns. Repeat the process in the right winding point to set the quarter-hour charm and the left winding point to set the hour strike. You'll find a range of Ansonia clocks on 1stDibs.
How do I wind a Vacheron Constantin watch?
1 Answer
1stDibs ExpertMarch 22, 2022
To wind a Vacheron Constantin, turn the winding crown clockwise until you sense some resistance. Typically, manual-winding watches require daily winding. You usually won't have to wind a self-winding timepiece unless you do not wear it for a day or two. Shop a range of Vacheron Constantin watches on 1stDibs.
How do I manually wind a Patek Philippe?
1 Answer
1stDibs ExpertApril 5, 2022
To manually wind your Patek Philippe watch, locate the crown and rotate it clockwise 30 to 40 times. Stop as soon as you feel resistance to avoid overwinding — this is important, as overwinding can potentially damage your watch. Find an assortment of vintage manual Patek Philippe watches on 1stDibs.