Carlo Scarpa Furniture

A bottle designed by Carlo Scarpa for Venini in the mid 1930s. The bottle is a very faint blue green color and displays the mezza filigrana method of glass ...

The Delfi table by Carlo Scarpa for Cassina of the 60s and 70s is an iconic work of Italian design. This piece has a polished white marble surface that blends perfectly with its geom...

Carlo Scarpa ceiling lamp 1938 Ceiling lamp designed by Carlo Scarpa and manufactured by Venini Murano Clear and Lattimo “ a fasce” gla...

“Poliedri” chandelier designed by Carlo Scarpa and produced by the Italian manufacturer Venini in, 1958. Made of opaline Murano glass. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. Only a year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity; from 1927, he began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building which stands on the banks of the Grand Canal, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, which are all worth mention. One of his key works, despite its relatively modest diminished proportions, was the first of many works which were to follow in the nineteen fifties: the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and shows clearly Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how twentieth-century museums were to be set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his greatest ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of the Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) and at the Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider being one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions which were to make the most of his formal skills, working on the Carlo Felice Theatre in Genoa as well as another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa began work building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem”, [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure”. Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded 8 years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana”, “Quatour” and “Orseolo”. While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

12 Light chandelier designed by Carlo Scarpa for Venini , Model 99.37 in Murano Italy. This Chandelier originally designed in 1940 was manufactured in 2009. All the pieces are in ...

A hand blown glass globe / sphere with stunning reticello glass design, wiith brass stem and canopy. Designed by Carlo Scarpa for Venini, circa 1940. A c...

An original Carlo Scarpa Cornaro loveseat / armchair, original fabric, Italy. Produced by Gavina in the 1970s. We can reupholster in COM at additional cost. Fast shipping worldwide. ...

“Delfi” dining table, designed by Carlo Scarpa and Marcel Breuer and produced by the Italian manufacturer Studio Simon in 1969. Made of white Nax...

In 1921 Venini and Cappellin opened a glass factory called Vetri Soffiati Muranesi Cappellin Venini & C. on the islands of Murano, the historic glass production centre in the lagoon of Venice, Italy. With Luigi Ceresa and Emilio Hochs as investors, they arranged to purchase the recently closed Murano glass factory of Andrea Rioda, hire the former firm's glassblowers, and retain Rioda himself to serve as technical director of the venture. Venini embarked on collaborations with architects and designers such as Cini Boeri, Tomaso Buzzi, Gio Ponti, Carlo Scarpa, Ettore Sottsass, Tapio Wirkkala, Gae Aulenti, and Massimo Vignelli. The ethos was to "take the Murano tradition of glass blowing and combine it with the French fashion industry's tradition of using designers". Here you can see a small lattimo vase "a mezza filigrana" realized by Venini on Carlo Scarpa...

Carlo scarpa.

“Poliedri” chandelier designed by Carlo Scarpa and produced by the Italian manufacturer Venini in, 1958. Made of opaline Murano glass. Born in Venice on June 2nd, 1906, Carlo Scarpa began working at a very early age. Only a year after he had first qualified as an architect in 1926, he began working for the Murano glassmakers Cappellin & Co. in a consultative capacity; from 1927, he began to experiment with the Murano glass, and this research not only gave him excellent results here but would also inform his progress for many years to come. Between 1935 and 1937, as he entered his thirties, Carlo Scarpa accepted his first important commission, the renovation of Venice’s Cà Foscari. He adapted the spaces of this stately University building which stands on the banks of the Grand Canal, creating rooms for the Dean’s offices and a new hall for academic ceremonies; Mario Sironi and Mario De Luigi were charged with doing the restoration work on the frescos. After 1945, Carlo Scarpa found himself constantly busy with new commissions, including various furnishings and designs for the renovation of Venice’s Hotel Bauer and designing a tall building in Padua and a residential area in Feltre, which are all worth mention. One of his key works, despite its relatively modest diminished proportions, was the first of many works which were to follow in the nineteen fifties: the [bookshop known as the] Padiglione del Libro, which stands in Venice’s Giardini di Castello and shows clearly Scarpa’s passion for the works of Frank Lloyd Wright. In the years which were to follow, after he had met the American architect, Scarpa repeated similar experiments on other occasions, as can be seen, in particular, in the sketches he drew up in 1953 for villa Zoppas in Conegliano, which show some of his most promising work. However, this work unfortunately never came to fruition. Carlo Scarpa later created three museum layouts to prove pivotal in terms of how twentieth-century museums were to be set up from then on. Between 1955 and 1957, he completed extension work on Treviso’s Gipsoteca Canoviana [the museum that houses Canova’s sculptures] in Possagno, taking a similar experimental approach to the one he used for the Venezuelan Pavilion at [Venice’s] Giardini di Castello which he was building at the same time (1954-56). In Possagno Carlo Scarpa was to create one of his greatest ever works, which inevitably bears comparison with two other museum layouts that he was working on over the same period, those of the Galleria Nazionale di Sicilia, housed in the Palazzo Abatellis in Palermo (1953-55) and at the Castelvecchio in Verona (1957- 1974), all of which were highly acclaimed, adding to his growing fame. Two other buildings, which are beautifully arranged in spatial terms, can be added to this long list of key works that were started and, in some cases, even completed during the nineteen fifties. After winning the Olivetti award for architecture in 1956, Scarpa began work in Venice’s Piazza San Marco on an area destined to house products made by the Industrial manufacturers Ivrea. Over the same period (1959-1963), he also worked on renovation and restoration of the gardens and ground floor of the Fondazione Querini Stampalia in Venice, which many consider being one of his greatest works. While he busied himself working on-site at the Fondazione Querini Stampalia, Carlo Scarpa also began work building a villa in Udine for the Veritti family. To shed some light on the extent to which his work evolved over the years, it may perhaps be useful to compare this work with that of his very last building, villa Ottolenghi Bardolino, which was near to completion at the time of his sudden death in 1978. Upon completion of villa Veritti over the next ten years, without ever letting up on his work on renovation and layouts, Scarpa accepted some highly challenging commissions which were to make the most of his formal skills, working on the Carlo Felice Theatre in Genoa as well as another theatre in Vicenza. Towards the end of this decade, in 1969, Rina Brion commissioned Carlo Scarpa to build the Brion Mausoleum in San Vito d’Altivole (Treviso), a piece he continued to work on right up until the moment of his death. Nevertheless, even though he was totally absorbed by work on this mausoleum, there are plenty of other episodes which can offer some insight into the final years of his career. As work on the San Vito d’Altivole Mausoleum began to lessen from 1973, Carlo Scarpa began work building the new headquarters for the Banca Popolare di Verona. He drew up plans that were surprisingly different from the work he was carrying out at the same time on the villa Ottolenghi. However, the plans Carlo Scarpa drew up, at different times, for a monument in Brescia’s Piazza della Loggia commemorating victims of the terrorist attack on May 28th, 1974, make a sharp contrast to the work he carried out in Verona, almost as if there is a certain hesitation after so many mannered excesses. The same Pietas that informs his designs for the Piazza Della Loggia can also be seen in the presence of the water that flows through the Brion Mausoleum, almost as if to give a concrete manifestation of pity in this twentieth-century work of art. Carlo Scarpa has put together a highly sophisticated collection of structures, occupying the mausoleum’s L-shaped space stretching across both sides of the old San Vito d’Altivole cemetery. A myriad of different forms and an equally large number of different pieces, all of which are separate and yet inextricably linked to form a chain that seems to offer no promise of continuity, rising up out of these are those whose only justification for being there is to bear the warning “si vis vitam, para mortem”, [if you wish to experience life prepare for death] as if to tell a tale that suggests the circle of time, joining together the commemoration of the dead with a celebration of life. At the entrance of the Brion Mausoleum stand the “propylaea” followed by a cloister which ends by a small chapel, with an arcosolium bearing the family sarcophagi, the main pavilion, held in place on broken cast iron supports, stands over a mirror-shaped stretch of water and occupies one end of the family’s burial space. The musical sound of the walkways teamed with the luminosity of these harmoniously blended spaces shows how, in keeping with his strong sense of vision, Carlo Scarpa could make the most of all of his many skills to come up with this truly magnificent space. As well as a great commitment to architectural work, with the many projects which we have already seen punctuating his career, Carlo Scarpa also made many equally important forays into the world of applied arts. Between 1926 and 1931, he worked for the Murano glassmakers Cappellin, later taking what he had learned with him when he went to work for the glassmakers Venini from 1933 until the 1950s. The story of how he came to work on furniture design is different, however, and began with the furniture he designed to replace lost furnishings during his renovation of Cà Foscari. The later mass-produced furniture started differently, given that many pieces were originally one-off designs “made to measure”. Industrial manufacturing using these designs as prototypes came into being thanks to the continuity afforded him by Dino Gavina, who, as well as this, also invited Carlo Scarpa to become president of the company Gavina SpA, later to become SIMON, a company Gavina founded 8 years on, in partnership with Maria Simoncini (whose own name accounts for the choice of company name). Carlo Scarpa and Gavina forged a strong bond in 1968 as they began to put various models of his into production for Simon, such as the “Doge” table, which also formed the basis for the “Sarpi” and “Florian” tables. In the early seventies, other tables that followed included “Valmarana”, “Quatour” and “Orseolo”. While in 1974, they added couch and armchair “Cornaro” to the collection and the “Toledo” bed...

Vaso a Bollicine Carlo Scarpa Venini & C. 1932 Measures: height cm 34, diameter cm 25 XVIII Biennale di Venezia del 1932 Bibliography: Murano Mi...

Called "Poliedri" in Italian and known as "Polyhedral" in English, this design was created by Carlos Scarpa (1906-1978) for Venini when he was their art...

Model "Samo" table oval slab of clear glass on travertine frame designed by Carlo Scarpa and edited by Simon. Italy, 1970s. Particular version made with natural beige travertine, and...

If you like vintage lighting then you will love this glass sconces by Carlo Scarpa for Venini. Designed with four vertical tubes and metal centre with one E14 bulb. In full working ...

Suspension lamp model “Poliedri” designed by Carlo Scarpa, edited by Venini. Composed by Murano crystal pieces over a structure made in white lacquer metal. Italy 1950. Excellent vi...

Elegant sommerso a bollicine Murano glass bowl, designed by Carlo Scarpa for Venini. Hundreds of air bubbles in the case glass form create a light-catching...

Set of 2 glass wall lamps by Carlo Scarpa for Venini, Italy, mid-century Sold and priced individually Impressive 22" wall lamps with clear textured glass and slightly yellowish gla...

rare huge and majestic chandelier by venini, design carlo scarpa, made by 205 poliedri transparent glasses, with 19 bulb holder height 1 meter, diameter cm 70. no lost poliedri, on...

A beautiful Corroso a Bugne vase by Carlo Scarpa for Venini. With acid signature "Venini Murano" Literature: "Venetian Art Glass: An American Collection 1840 - 1970", Barovier, pag...

Vintage small vase green, burgundy and white runoff inlay in a form of amphora, design Carlo Scarpa Fratelli Toso Murano Murrine Millefiori. Murrine...

Lattimo Velato vase by Carlo Scarpa for Venini Murano ca. 1936 A rare lattimo velato vase designed by Carlo Scarpa ca. 1936. Manufactured by Venini Murano Venice in the 1930s. Thin ...

Fabulous original Venini Poliedri chandelier by Carlo Scarpa. Rare combination of light pink and Ice colored Murano glass. Chrome frame in very good original condition. Available ...

Fabulous original Venini Poliedri chandelier by Carlo Scarpa. Rare combination of light pink and Ice colored Murano glass. Ivory p...

Mid Century Italian Walnut "Scuderia" Sideboard by Carlo Scarpa for Bernini - 1970s.

A fine Italian Mid Century Modern glass "Mezza Filigrana" picture frame designed by, Carlo Scarpa for Venini. The mirror frame is internally decorated with pink lattice decoration an...

Carlo Scarpa Murano Glass Poliedri ceiling lamp for Venini in yellow and Grey, Italy 1950s.

Great Murano bowl acid signature, Venini Murano Italia" 3 line. This bowl was made in several finish and type of glass, bullicante, summerso, inciso, corroso, etc. Documented in Carlo Scarpa book...

Large wall lights designed by Carlo Scarpa for Venini in the 1940s. Each is composed of five hand blow Murano glasses made in the “Corteccia” technique. The color of the glass is amb...

This is a set of Carlo Scarpa armachairs designed and realized for the Auditorium in Rome, project by the Italian architect Marcello Piacentini, bu...

Rare deep red cased and iridized glass, bowl complete with stubber (cendrier / ashtray), designed by Carlo Scarpa (1906-1978) circa 1942, for Venini, with acid stamp on its underside 'Venini Murano MADE IN ITALY' From 1933 to 1947 Scarpa became the artistic consultant to Venini from 1933 to 1947 the glass manufacturer, one of the great celebrated glass works in the history of design. Carlo Scarpa’s highly inventive use of traditional Murano techniques resulted in this original sculptural and sensually formed crimson dish companied by its pestle. Scarpa's success was to look to the past with an innovative approach towards technique and creativity giving birth to the avant-garde. • Literature A Focused Obsession, Modern Italian Glass- The Martin Cohen Collection Helmut Ricke, Eva Schmitt, 'Italian Glass Murano: Milan...

Carlo Scarpa 'Battuto' Vase, c. 1938 Execution: Venini & C. Cased glass, green. Signed: Venini murano (acid stamp). Measures: H : 27 cm (10.6") Overall Very good condition ...

Carlo Scarpa 'Mezza Filigrana' Vase, c. 1934 Execution: Venini & C. Cased glass, white. Signed: Venini murano (acid stamp). Measure : H : 18 cm (...

A Cast iron industrial elements, converted in a console, iron shelves with cut glass top. Italy 1950 ca.

This is a set of Carlo Scarpa armchairs designed and realized for the Auditorium in Rome, project by the Italian architect Marcello Piacentini, bui...

Carlo Scarpa Murano vase for MVM Cappellin, Italy, 1930s.

Venini Carlo Scarpa Poliedri chandelier Murano glass brass, 1950, Italy.

A large 1950s hexagon shaped Poliedri ceiling light. Clear and pale blue and amatyst Poliedri glass components. White lacquered metal structure. Italy design by Carlo Scarpa for Ven...

Chandelier 1950, Venini Carlo Scarpa structure iron /glass.

Venini Carlo Scarpa Poliedri chandelier Murano glass brass, 1950, Italy.

Pair of model lamps "Poliedri" designed by Carlo Scarpa and edited by Venini, with structure in lacquered metal and Murano glass, Italy, 1950s. Carlo Scarpa was born in Venice in 19...

Pair of large sconces designed by Carlo Scarpa for Venini.

Around 1930 Gio Ponti gave Paolo Venini some sketches for glass obelisks. Shortly thereafter Carlo Scarpa designed for Venini a torqued obelisk in transparent diamante glass -- so na...

VENINI chandelier Murano glass CARLO SCARPA Poliedri 1955 iron , Made in Italy.

Venini “Carlo Scarpa” Poliedri Murano glass iron brass, 1958, Italy.

Big Carlo Scarpa Venini Murano glass vase "Battuto" series acid signed cm 33.5.

This is a very well-known piece by Carlo Scarpa, acid signed four lines underside, Murano Venini made in Italy. Mint condition.Rare piece .

Un iconico lampadario a POLIEDRI, disegnato dal architetto CARLO SCARPA e prodotto dalla vetreria muranese, VENINI, Originale del 1950.

Extending dinning table by Cardin, Italy, circa 1950.

Pair of large Art Deco Sconces with polyhedral shaped blown glass ornaments. Designed by Carlo Scarpa for Venini Italy and made circa 1950. In perfect working condition and takes E-1...

Carlo Scarpa for Venini vide poche in red and clear glass.

Bowl by the Italian Master Carlo Scarpa, signed and published. Designed in 1936 for Venini. A large piece, compared to many others designed for Venini. Features gold foil inclusions....

Bowl by the Italian Master Carlo Scarpa, signed and published. Designed in 1934-36 for Venini. A rather large pieces, compared to many others designed for Venini. Murano glass with g...

Carlo Scarpa Frame Signed VENINI

Iconic model, "Poliedri" semi flush mount ceiling light in amethyst, topaz and clear Murano glass. This assemblage of subtly colored, hand crafted poliedre is arranged in a staggered...

This is a symmetrical chandelier, made to look like a bunch of grapes, 'Poliedri' shaped Murano glass ornaments alternating in height and color....

Original hand blown chandelier by Carlo Scarpa for Venini in the shape of a bunch of grapes. It is composed of clear and amber color "poliedri".