Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 20

Antique George III Wine Cooler by Matthew Boulton with Robinson Crest 18th C

$1,693.45
£1,250
€1,461.13
CA$2,337.22
A$2,618.20
CHF 1,361.79
MX$31,936.68
NOK 17,337.42
SEK 16,347.95
DKK 10,905.51

About the Item

This is an elegant antique English Old Sheffield plate silver on copper ice bucket or wine cooler, circa 1790 in date, and bearing the sunburst makers marks of the world renowned silversmith Matthew Boulton. The cooler is of campana baluster form and has a pair of foliate cast scroll handles, gadrooned borders and flared rim. It features an engraved Hamilton family crest with the motto 'Qualis ab Incepto' (The same from the beginning) The Marital Arms of Robinson and Maltby The armorial bearings as engraved upon this George III Old Sheffield Plate Wine Cooler by Matthew Boulton dating to circa 1790 are those of Robinson impaling Maltby. These armorial bearings denote the marshalling of a marital coat showing on the dexter (the heraldic right on the left as you view the piece) the arms of the husband and on the sinister (the heraldic left on the right as you view it) the arms of the wife. These arms undoubtedly commemorate the marriage of William R2. Robinson (born circa 17933 died 11th December 18664), of 17 Hyde Park Terrace, Paddington in the County of Middlesex and of Austin Friars in the City of London and his first wife, Jane Maltby (baptised 29th May 17966 died 1833). They were married at the Parish Church of St Mary the Virgin, Walthamstow in the County of Essex on the 8th June 1819. William was the eldest son of William Tooke Robinson, of Water House, Walthamstow in the County of Essex and his wife, Isabella Straker, whilst Jane was the fourth daughter of Thomas Maltby, of Upper Harley Street in the County of Middlesex and of Walthamstow in the County of Essex and his wife, Henrietta Crichton. See attached photos of the document and the house. The attention to detail is absolutely fantastic and it is certain to attract attention wherever they are placed. Condition: In excellent condition with clear makers marks and no dings, dents or signs of repair. Please see photos for confirmation. Dimensions in cm: Height 28 cm x Width 27 cm x Depth 27 cm Dimensions in inches: Height 11 inches x Width 11 inches x Depth 11 inches Matthew Boulton Boulton was not a "goldsmith" or a "silversmith" in the accepted sense, yet for his achievements and services to the craft of goldsmithing he is fully worthy of inclusion in the list of great English goldsmiths. Matthew Boulton was born in Birmingham on 3 September 1728. His father Matthew Boulton (senior) was a "toy maker" and silver stamper specialized in the production of shoe-buckles. Boulton junior was taken into partnership in 1749 and was left in sole charge of the business after the death of his father in 1759. Boulton had the ambition to establish a manufacturing complex where craftsmen in the various branches of the "toy" trade would work together under one roof, enabling him to reap both wholesale and retail profits. In 1761 he realized his project purchasing a one-hundred- year-lease of the "Soho" estate at Handswoth Heath (two miles from Snow Hilton the Wolverhampton Road). In 1762 Boulton took into unofficial partnership John Fothergill who would act as a travelling salesman to advertise his wares and the factory moved to Soho in the same year. The partnership concentrated in the production of steel "toys" a little later on buttons and buckles made in a variety of substances, including , of course, silver. In 1762 Soho factory began to produce articles in "Sheffield" plate and one of the first to adopt "Sterling silver thread" edging which prevent to reveal the underlying copper. Boulton soon became the largest manufacturer of "Sheffield plate" of the country expanding the business of Soho manufactory in the production of bijouterie, objects d'art and de virtue, in ormolu, pinchbeck, and in clocks. In 1765 Boulton began the manufacture of pieces in solid silver, being obliged to send every piece of plate to Chester to be marked (Chester was the nearest assay office, 72 miles away from Birmingham). Boulton was the promoter a petition obtaining in 1773 the Royal Assent to assay silver in Birmingham (the same was for Sheffield). Boulton & Fothergill entered their joint mark consisting of their initials, MB before IF. After the death of Fothergill (1782) Boulton punched his plate with his initials alone. When manufacturers of plated ware were permitted to register their marks at the Assay Office in Sheffield (1784), Boulton registered his mark of "twin suns" under the name Boulton M. & Co. The most important designers for Boulton plate in the neo-classic taste were Robert Adams and James Wyatt. Matthew Boulton died on 17 August 1809. The mark MB continued to be used by Matthew Boulton Plate Co until 1832. Old Sheffield Plate - or ‘fused plate’ as it is sometimes known, was the first commercially viable method of plating metal. The material was accidentally invented by Thomas Boulsover, of Sheffield's Cutlers Company, in 1743. While trying to repair the handle of a customer's decorative knife, he heated it too much and the silver started to melt. When he examined the damaged handle, he noticed that the silver and copper had fused together very strongly. Experiments showed that the two metals behaved as one when he tried to reshape them, even though he could clearly see two different layers. Boulsover set up in business, funded by Strelley Pegge of Beauchief, and carried out further experiments in which he put a thin sheet of silver on a thick ingot of copper and heated the two together to fuse them. When the composite block was hammered or rolled to make it thinner, the two metals were reduced in thickness at similar rates. Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath. When this new material was used to make buttons, they looked and behaved like silver buttons but were a fraction of the cost. The technique Boulsover developed was to sandwich an ingot of copper between two plates of silver, tightly bind it with wire, heat it in a furnace and then mill it out in to sheet, from which objects could be made. Our reference: A3834a
  • Dimensions:
    Height: 11.03 in (28 cm)Width: 10.63 in (27 cm)Depth: 10.63 in (27 cm)
  • Materials and Techniques:
  • Period:
    1790-1799
  • Date of Manufacture:
    Circa 1790
  • Condition:
  • Seller Location:
    London, GB
  • Reference Number:
    Seller: A3834a1stDibs: LU950639639182

More From This Seller

View All
Antique Regency Wine Cooler Old Sheffield Plate 19th Century
Located in London, GB
This is a wonderful, rare and highly decorative antique English Old Sheffield Plate Regency wine cooler of campana form, Circa 1820 in date. It is embellished with applied vine l...
Category

Antique 1820s English Regency Sheffield and Silverplate

Materials

Sheffield Plate

Antique George III Silver Plate Wine / Champagne Cooler Early 19th Century
Located in London, GB
A truly superb antique English George III Old Sheffield plate wine / champagne cooler, Circa 1810 in date. This highly versatile cooler features the "silver on copper" Sheffield Eng...
Category

Antique 1810s English George III Wine Coolers

Materials

Silver

Antique "1st Lancashire Rifle" Silver Plated Wine Cooler Elkington 19th Century
Located in London, GB
This is an exceptional antique English Neo-classical Revival silver plated wine cooler bearing the makers mark of the renowned English silversmith Elkington, dated 1873. The wine co...
Category

Antique 1870s Revival Wine Coolers

Materials

Silver

Silver George III Tureen William Bennett 1808 Birchall and Hayne 19th Century
By William Bennett
Located in London, GB
This is a beautiful antique English George III sterling silver tureen and lid, with hallmarks for London 1808 and the makers mark WB for William Bennett. The tureen is beautiful i...
Category

Antique Early 1800s English George III Sterling Silver

Materials

Sterling Silver

Antique Edwardian Silver Plate Wine Cooler 20th Century
Located in London, GB
This is a gorgeous antique Edwardian silver plate on copper wine cooler,  Circa 1910 in date.   This oval shaped cooler features a beautiful shaped rim with a superb engraved coat of...
Category

Early 20th Century Edwardian Wine Coolers

Materials

Silver Plate, Copper

Antique Regency Old Sheffield Silver Plated Tea Urn Samovar 19th Century
Located in London, GB
This is a wonderful antique Regency Old Sheffield silver plated tea urn, Circa 1820 in date. This handsome antique Old Sheffield samovar has been ...
Category

Antique 1820s Regency Sheffield and Silverplate

Materials

Sheffield Plate

You May Also Like

Antique Old Sheffield Capana Shaped Wine Cooler, Dated circa 1830
Located in London, GB
Antique Old Sheffield Capana shaped wine cooler, dated circa 1830. Beautifully made in a melon style with shell, leafwork and flower decoration. The liner is easily removed to pack...
Category

Antique 1830s English William IV Sheffield and Silverplate

Materials

Sheffield Plate

Old English Sheffield Plate Regency Wine Cooler
By Sheffield Silver Co.
Located in Tarry Town, NY
Old English Sheffield silver plate Regency style wine cooler / ice bucket .This exceptional Regency cooler retains the original detachable support frames, liners and push fit cover in a campana shape . It is made of silver on copper and fitted with an exceptional pair of decorative handles embellished with reeded decoration. It has a superb armorial engraving...
Category

Antique 1810s English Regency Wine Coolers

Materials

Silver Plate

Wine, Champagne Cooler, Sterling Silver, 1812, George III, James Scott, Chinese
By James Scott, Dublin 1
Located in Buenos Aires, Olivos
Fine chinoiserie wine or champagne cooler, sterling silver, Dublin 1812, George III, James Scott maker, HAMY retailer. It has engraved Chinese scenes ...
Category

Antique Early 19th Century Irish George III Barware

Materials

Sterling Silver, Silver

Antique Victorian English Sterling Silver Wine Cooler
By John Watson & Son
Located in Jesmond, Newcastle Upon Tyne
An exceptional, fine and impressive antique Victorian English sterling silver wine cooler; an addition to our antique wine and drink related silverware collection. This exceptional ...
Category

Antique 1830s English Victorian Barware

Materials

Sterling Silver

19th Century English Barware / Tableware Wine Cooler
Located in Tarry Town, NY
19th Century English Sheffield silver plated wine cooler / ice bucket with removable insert , exterior design details and two side handles . The wine cooler / ice bucket is in good a...
Category

Antique 1840s English Barware

Materials

Silver Plate, Copper

Mid 19th Century English Barware / Wine Cooler
Located in Tarry Town, NY
Mid 19th century English Sheffield silver plated barware / tableware wine cooler / ice bucket with removable insert, exterior design details and two side handles. The wine cooler / i...
Category

Antique Mid-19th Century English Edwardian Wine Coolers

Materials

Silver Plate, Copper