Pre-War Polished Aluminum Lionel Train

This cylindrical lamps is very poetic with all its small captivated fragments. Its color ranges from yellow to green with dark green and red inclusions. It always seems to be in move...

This cylindrical lamps is very poetic with all its small captivated fragments. Its color ranges from yellow to vivid orange with red inclusions. It always seems to be in movement... ...

This cylindrical lamps is very poetic with all its small captivated fragments. Its color ranges from yellow to vivid orange with red inclusions. It always seems to be in movement. M...

This cylindrical pair of lamps is very poetic with all its small captivated fragments. Its color ranges from red to vivid orange with black inclusions. It always seems to be in movement. Total height of both lamps is 49 cm, including custom made lamp shades...

Back lit, cast aluminum tortoise or turtle shell table lamp by Aurthur Court. Pierced opening surround the shell to let in as well as frame the piece. Mounted on a cast aluminum base...

From the U.S. Navy, this awesome prismatic beacon has the most incredible lens you will ever see. Polished aluminum pole mounted high power nautical range light. Fitted with huge cut...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...