18th Century Brass Barrelled Flintlock Blunderbuss

A fine example of a double barrel flintlock sporting gun by Probin, London. The browned barrels and the locks are both signed, good colour walnut stock. circa 1795 Barrel length 83c...

A fine example of a silver Butterfield type sundial in the original green shagreen case. The finely engraved dial has Premier cadran (first dial) engraved with the city names and lat...

Extremly Rare South American Silver-Mounted Miquelet-Lock Blunderbuss Belt Pistol Late 18th century, Mexican With a roped silver band around the turned and belled muzzle, the forward sections polygonal and inlaid with silver fronds, octagonal breeches with silver foliage on the flats either side, a broad silver band at the rear, foliate engraved tangs, characteristic locks with fluted mount beneath the pan enclosing the steel-spring, full stocks inlaid with silver panels secured by silver pins and pierced and engraved with foliage inhabited by monsters, birds and a pair of rabits, the last forward of the trigger-guards, and studded with further silver pins. The fore-ends en suite and each inlaid with a silver panel pierced and engraved as a double-headed eagle, foliate engraved silver side-plates each pierced for an iron belt hook...

Cast brass Hanukkah Lamp, Galicia, 18th century. The backplate is cast and pierced featuring dense scrollwork. The side panels fitted with two servant lights, fronted by a row of eight oil fonts. Scholars theorize that these Polish Chanukah Lamps that bear two servant lights (as opposed to the singular servant light normally found on a Chanukah Lamp), served a purpose, having been used on one of the days that Chanukah fell on the Sabbath, as Sabbath Candlesticks. This lamp was made by the technique known as "sand casting". This process begins with a wooden mold that was carved out to create negative space, which in turn is used to make the inverse form or shape to be used for the casting of metal. The mold is pressed into fine sand mixed with clay, then removed, and molten brass poured into the impression. When a mold wears out, a casting from that mold is often used as the mold for the next generation. Those later lamps...