Items Similar to Detailed Owner’s Model or Shipyard Model of a Double Ended Harbour Launch
Want more images or videos?
Request additional images or videos from the seller
1 of 10
Detailed Owner’s Model or Shipyard Model of a Double Ended Harbour Launch
About the Item
A detailed owner’s model or shipyard model of a double ended harbour launch, painted pale blue, the coach house with eight portholes, fitted with port and starboard lights and other details, with a continuous rope fender round the gunwale, all raised on a mahogany plinth. Probably American, circa 1940.
Model height 6 ½ in length 19 inches beam 6 inches
Overall height 8in length 20 ½ inches beam 9 ½ inches.
- Dimensions:Height: 8 in (20.32 cm)Width: 20.5 in (52.07 cm)Depth: 9.5 in (24.13 cm)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1940
- Condition:Wear consistent with age and use.
- Seller Location:Lymington, GB
- Reference Number:1stDibs: LU973032489982
About the Seller
5.0
Recognized Seller
These prestigious sellers are industry leaders and represent the highest echelon for item quality and design.
Established in 1982
1stDibs seller since 2013
106 sales on 1stDibs
Typical response time: 4 hours
Associations
LAPADA - The Association of Arts & Antiques Dealers
- ShippingRetrieving quote...Ships From: Lymington, United Kingdom
- Return PolicyA return for this item may be initiated within 14 days of delivery.
More From This SellerView All
- Fine Shipyard Model of a SteamshipLocated in Lymington, HampshireA fine shipyard model of an early sailing steam screw ship of the transitional sail to steam period with good detailed deck fittings including hatches, ...Category
Antique 1850s English Models and Miniatures
MaterialsWood
- George Edward Horton: the Launch of H.M.S. ‘Victoria’ from the Elswick ShipyardLocated in Lymington, HampshireGeorge Edward Horton: The Launch of H.M.S. ‘Victoria’ from the Elswick shipyard of Sir W. G. Armstrong Whitworth and Co. Ltd, Newcastle-upon-Tyne in 1887, watercolour and pencil heig...Category
Antique 1880s European Paintings
MaterialsPaint
- Fine Shipyard Half Hull Model of the Northern LightLocated in Lymington, HampshireA fine shipyard half hull model of the Northern light. Still retained in its original case and set upon its original backboard. The condition and quality of this lovely model is sup...Category
Vintage 1910s English Models and Miniatures
MaterialsWood
- Shipyard Model of the Wooden Steam Ship ‘S.S. F.W.Harris’Located in Lymington, HampshireA shipyard model of the wooden steam ship ‘S.S. F.W.Harris’, 1877, the hull painted rust-red with black top sides and a black funnel, finely detailed wi...Category
Antique 1870s English Models and Miniatures
MaterialsSatinwood
- A demonstration or museum model of a civil defence traversing cannonLocated in Lymington, HampshireA demonstration or museum model of a civil defence traversing cannon. This bronze scale model of a defence cannon rests on a solid ebony carriage with working blocks and tackle to run the barrel out. It is set on a Derbyshire black marble base inset with a spoked pivot pin in the centre of a circular rail and a second curved rail for the two pairs of trucks to follow, thus allowing the gun to swivel or ‘traverse’ from side to side. It is mounted on its original walnut table with quadrant spandrels supported on four sturdy turned and reeded legs. There is a plaque reading ‘Model...Category
Antique 1840s English Historical Memorabilia
MaterialsBronze
- Carved and Shaped Teak Seat Back from the Launch of Minesweeper H M S BluebellLocated in Lymington, HampshireA carved and shaped teak seat back from the launch of minesweeper H M S Bluebell, of shaped rectangular form with a central panel with 3in brass lettering HMS Bluebell, with braced b...Category
Vintage 1910s English Nautical Objects
MaterialsTeak
You May Also Like
- Mounted Half Block Boat, Ship Builders/Owner’s ModelLocated in Chillerton, Isle of WightMounted half block boat, ship builders/owner’s model The half model was made in the 1960s and is mounted on mahogany which Measures approximately 30” by ...Category
Mid-20th Century Beaux Arts Nautical Objects
MaterialsWood
- Shipyard Built Model of a Steam Launch, by Robertson & Sons of ArgyllLocated in London, GBA very fine working model of a steam launch built by Robertson & Sons shipyard. Sandbank, Argyll. Interior painted with BUILT ROBERTSON AND Co's SHIPY...Category
Early 20th Century Scottish Models and Miniatures
- Working Model of a Steam LaunchLocated in Woodbury, CTScratch-built working steam launch. Boiler connects to a dual-piston drive that directly powers a single propeller.Category
20th Century British Nautical Objects
MaterialsCopper, Brass
- 1950 Vintage Pictures Depicting Three Ships Launching Riva Trigoso ShipyardsLocated in Milan, ITRectangular frame with three pictures depicting three ships launching in Riva Trigoso shipyards. Montello launched on October 14, 1961; Athinai launched...Category
Vintage 1950s Italian Nautical Objects
MaterialsPaper
- 1950 Vintage Pictures Depicting Four Ships Launching Riva Trigoso ShipyardsLocated in Milan, ITRectangular frame with original pictures depicting four ships launching in Riva Trigoso shipyard: Winston Churchill ferry (25th April 1967); Gatun cargo...Category
Vintage 1960s Italian Nautical Objects
MaterialsPaper
- 1950 Vintage Pictures Depicting Three Ships Launching Riva Trigoso ShipyardsLocated in Milan, ITRectangular frame with original pictures depicting three ships launching in Riva Trigoso shipyard: Monfiore transatlantic launched on August 25, 1959; M...Category
Vintage 1950s Italian Nautical Objects
MaterialsPaper
