Pair of Chairs by Arthur Umanoff for Madison in Original Knit Fabric, c. 1960s
About the Item
- Creator:Arthur Umanoff (Designer)
- Dimensions:Height: 31.25 in (79.38 cm)Width: 28.5 in (72.39 cm)Depth: 25 in (63.5 cm)Seat Height: 17 in (43.18 cm)
- Sold As:Set of 2
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1950s
- Condition:Wear consistent with age and use. This stylish set of arm chairs have recently undergone a partial restoration that features new upholstery in a lovely, adaptable knit grey fabric. The solid walnut frames are in 100% original, vintage condition and do show minor signs of wear.
- Seller Location:Deland, FL
- Reference Number:
Arthur Umanoff
Though much of Arthur Umanoff’s furniture is marked by a no-frills simplicity common in American mid-century modern design, his work is anything but one-note. Over the course of a prolific career, Umanoff designed everything from case pieces to candleholders to dining chairs in iron, leather, walnut, wicker and more. With furnishings for a broad range of manufacturers throughout the ’50s, ’60s, ’70s and early ’80s, Umanoff continued a thread of sculptural elegance and textural sensitivity through his designs.
After graduating from Pratt Institute in the early 1950s, Umanoff experimented mostly with wood furniture before landing a job at Post Modern Ltd, a New York manufacturer of wrought-iron furniture. There he produced furnishings that married wrought iron with wood and plastic, creating functional pieces free of utilitarian bulkiness. Umanoff continued his experimentation with mixed materials through a partnership with Shaver Howard, for whom he designed wine racks in combinations of iron, leather and wicker.
When Shaver Howard bought Boyeur Scott, Umanoff conceived several furniture designs for the brand, including the 1964 Granada collection, whose curlicue iron bases, visible through glass tops, stand out as some of his most ornate and decorative work. Indeed, much of Umanoff’s oeuvre is far more simplistic, like iron-and-pine armchairs for The Elton Co. or low-backed, slatted-seat barstools with slender iron legs for Raymor.
Umanoff was fluent, too, in the more sumptuous modernism of the era: In the mid-1960s, he designed the 2405 and 4449 armchairs for Madison Furniture Industries. Popular in offices, the walnut-framed, leather-upholstered seats, which could have been mistaken for the seductive Scandinavian modern seating of the era, were reportedly the jumping-off point for Captain Kirk’s iconic seat on Star Trek.
Even as he is among the mid-century modern designers you may not know, with work across such a range of styles and manufacturers (most no longer in business), Umanoff, who died in 1985, leaves a legacy that is fascinatingly diverse and at times enticingly elusive, making his work intriguing objects for collectors.
Find vintage Arthur Umanoff furniture today on 1stDibs.
- ShippingRetrieving quote...Ships From: Deland, FL
- Return PolicyA return for this item may be initiated within 14 days of delivery.
- Arthur Umanoff Walnut Bench Modular Sofa with Table for Madison Furniture, 1950sBy Arthur UmanoffLocated in Deland, FLUltra cool modular 2-seat sofa with built in table in walnut and covered in original knit designed by Arthur Umanoff in the 1950s for Madison ...Category
Vintage 1960s American Mid-Century Modern Benches
MaterialsWalnut
- Set of 4 Arthur Umanoff Grenada Collection Wrought Iron Dining Chairs, c. 1960'sBy Arthur UmanoffLocated in Deland, FLStylish and iconic the Grenada collection, from circa 1964, is a favorite design of collectors by Arthur Umanoff. Constructed from wrought iron with Spanish influences in proportions and shapes these chairs are architecturally fascinating. The seats have new burnt orange crushed velvet...Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsIron
- Set of Two '2' Jens Risom for Knoll Model 666 Side Dining Chairs in Birch, 1960sBy Jens RisomLocated in Deland, FLDesigned by Jens Risom for Knoll in 1941, the model 666 chair is perhaps Risom's most iconic creation in a career that led American Mid-Century furniture des...Category
Vintage 1960s American Mid-Century Modern Side Chairs
MaterialsBirch
- Set of 2 Patinaed Armchairs After Edward Wormley for Dunbar Chairs, USA, c. 1960By Edward WormleyLocated in Deland, FLStately and sophisticated with striking angular lines reminiscent of and often attributed to Edward Wormley for Dunbar. This set of armchairs is constructed from solid walnut and is ...Category
Vintage 1960s American Mid-Century Modern Side Chairs
MaterialsWalnut
- Set of 4 Dining Chairs, Teak & Oatmeal Knit Fabric by Vamdrup Stolefabrik, 1960sBy Vamdrup StolefabrikLocated in Deland, FLIntroducing a rare set of Danish-made dining chairs produced by Vamdrup Stolefabrik in the mid 1970's. Featuring frames and legs cut from solid teak and sculpted to graceful features...Category
Vintage 1960s Danish Mid-Century Modern Dining Room Chairs
MaterialsFabric, Teak
- Model 197 Side / Desk / Dining Chair by Finn Juhl for France & Son, c. 1960'sBy Finn JuhlLocated in Deland, FLDesigned by Finn Juhl for France & Son and imported by John Stuart, a New York designer showroom, this elegant chair was made in Denmark and bares t...Category
Vintage 1960s Danish Scandinavian Modern Side Chairs
MaterialsTeak
- Arthur Umanoff "Love" ChairBy Arthur UmanoffLocated in Highland, INA joyful design by designer Arthur Umanoff who created many delightful works in modest materials for Shaver Howard. This wrought iron chair has a back with a playful cast design that...Category
Vintage 1960s American Mid-Century Modern Side Chairs
MaterialsMetal
- ARTHUR UMANOFF for Shaver-Howard MCM Modern Steel Dining Side Chairs - Pair BBy Arthur UmanoffLocated in Charlotte, NCA pair of Mid 20th Century Modern style steel patio side chairs designed by Arthur Umanoff for Shaver-Howard. Steel metal frame, grey color finish, flared backrest with straight cres...Category
Mid-20th Century American Mid-Century Modern Patio and Garden Furniture
MaterialsSteel
- ARTHUR UMANOFF for Shaver-Howard MCM Modern Steel Dining Side Chairs - Pair ABy Arthur UmanoffLocated in Charlotte, NCA pair of Mid 20th century Modern style steel patio side chairs designed by Arthur Umanoff for Shaver-Howard. Steel metal frame, grey color finish, flared backrest with straight cres...Category
Mid-20th Century American Mid-Century Modern Patio and Garden Furniture
MaterialsSteel
- Arthur Umanoff Wood and Rush ChairBy Arthur UmanoffLocated in Los Angeles, CASculptural Arthur Umanoff chair with signature rush back, slatted wood seat, and iron legs. Metal frame in a vintage adobe finish. Rare design. Floating ...Category
Vintage 1950s American Chairs
MaterialsIron
- MCM Arthur Umanoff for Directional Chrome Sled Lounge Chair Newly UpholsteredBy Directional, Arthur UmanoffLocated in Chicago, ILMid-Century Modern Arthur Umanoff for directional chrome base sled lounge chair newly upholstered in designer “ice-gold” metallic leathe...Category
Vintage 1970s Mid-Century Modern Lounge Chairs
MaterialsChrome
- Arthur Umanoff Wood and Rush Sculptural ChairsBy Arthur UmanoffLocated in Los Angeles, CAEarly sculptural chairs by Arthur Umanoff. Chairs with signature rush back, slatted wood seat, and iron legs. Floating backrest. Look great from all angles. Good vintage condition. T...Category
Vintage 1950s American Chairs
MaterialsIron
