Cabinet Drawer Pulls by Daughter Mfg

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

These aluminum Teardrop Sconces have an outer shell that is made from two halves made from 6101 aluminum that have been joined together using a pin and groove joinery. The material i...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

These brass Teardrop Sconces have an outer shell that is made from two halves made from 385 brass (also known as architectural bronze) that have been joined together using a pin and ...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

Antique English oak cabinet with 5 drawers, circa late 18th, early 19th century, with ornate brass hardware and teardrop form pulls. The cabinet with paneled sides, planked board bac...

Dark tone oak filing cabinet with eight drawers with wooden pulls and brass keyhole hardware. Good condition with appropriate wear from age, with a minor split in the top. One availa...

Cabinet pulls in oak wood. These are brand new in the box. Perfect for updating new and vintage furniture. Hardware is included.

Cabinet With A Drawer by Tomasz Omachel Dimensions: D 40 x W 60 x H 35 cm. Materials: Ash and brass. Available in different wood options: oak, ash, a...

Antique double sided multi-drawer cabinet Overall dimensions: 29" x 78" x 53 1/2" high Internal drawer dimensions: 4 1/2" x 12" x 4 1/2" 96 Drawers on each side.

White Bone Tone Wash Lacquer 6 Drawer Dresser Solid Brass Ornate Decorative Drawer Pulls Mint!