Drop Leaf Dining Table by Hans J. Wegner for Andreas Tuck

Large Hans Wegner teak AT-314 drop leaf dining table with oak base and brass stretchers.

Hans Wegner design dining table for Andreas Tuck, Denmark. High qulaity construction and materials executed with an oak base and contrasting teak top and leaves by the cabinetry shop...

This incredible table was designed by Danish legend Hans J. Wegner for production by Andreas Tuck Mobelfabrik, who was responsible for many of Wegner's early designs and established the precedent of exceptional build quality we know from Wegner pieces today. There were a few versions of this table, some in other woods, but all of them smaller. We have the largest version of this table ever produced, the AT-319, which extends up to just shy of 10 feet long with both drop-leaf panels attached and deployed. This is also a rosewood model, long held as the most desirable. The quality of this table is among the best from the era. Easily comparable to other exceptional pieces by Wegner, Finn Juhl, and Fritz Hansen. The base is entirely chrome plated steel with precision-manufactured steel bars added for support. The hinges for the drop-leaves are also of steel. Beneath the table, the mechanism for the sliding panels which hold the leaves up is crafted of solid wood and securely mounted the top with tens of screws. The classic attention to detail by Andreas Tuck has resulted in bookmatched rosewood both atop and beneath the table, a measure not taken by other factories for cost-saving. There were absolutely no cost-saving measures for this table's production. This table is in original condition, but will receive a complete restoration upon purchase. This involves a laborious process, including careful hand-sanding and chemical stripping of the top. A new finish is applied with industrial-grade tools, then sealed using a clear lacquer. Finally, it will spend hours in the polishing booth, resulting in an exceptional shine. When complete, this table will look better than it did new. Our in-house professionals have decades of experience working on the most exclusive pieces. In the last few photos are other pieces that we have restored so that you may get a sense of our work. Nanna Ditzel Rosewood Desk This is the polished finish we think will suit the piece best. It allows the rosewood to shine in full glory and creates incredible contrast. Florence Knoll Rosewood Cabinets...

Hans J. Wegner "AT-319" rosewood & steel drop-leaf dining table for Andreas Tuck  Dimensions: Dining table: 28in H x 71in - 118in W x 29.25in D 2x extension leaf 23.50in. ____...

Large and rare Hans Wegner teak and steel legged drop-leaf dining table. Leaves can be also be removed. Manufactured by Cabinetmaker Andreas Tuck. Table measures 28" x 25" x 71" x 39...

Hans J Wegner, Danish Teak & Oak Drop-Leaf Dining Table by Andreas Tuck, 1950s Designed by Hans J Wegner in 1950 and manufactured by cabinetmaker Andreas Tuck in Demmark, this is th...

Oak and teak. Measurements: L: 76.5 cm / 2’ 6” W: 102 cm / 3’ 4” H: 73 cm / 2’ 4 3/4" L with extension: 198 cm / 6’ 4”. Hans J. Wegner is the father of Danish design and is well ...

Rare largest size Hans Wegner dining table produced, Model AT-314. drop leaf at either side each side with a pullout support, opening up to 122"in. Wide. High quality materials and c...

This magnificent drop-leaf table by Danish designer Hans J. Wegner can be used both as a work desk and as a dining table. The design is from 1955 and this particular table is from th...

Extendable teak table by Hans Wegner, manufactured by Andreas Tuck in Denmark. The total length in the extended position is 240 cm. When the two extra leaves in the center are remove...