Norman Cherner Table for Konwiser
View Similar Items
Norman Cherner Table for Konwiser
About the Item
- Creator:Norman Cherner (Designer)
- Dimensions:Height: 28.5 in (72.39 cm)Width: 60 in (152.4 cm)Depth: 30 in (76.2 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:c. 1953
- Condition:Wear consistent with age and use. Fine original condition with a few chips to the formica and expected wear to the metal base.
- Seller Location:New York, NY
- Reference Number:1stDibs: LU8285769469
Norman Cherner
Norman Cherner was an influential designer who explored postwar technological innovations and how to incorporate them into furniture production and architecture. And while its history is complicated, his Cherner chair is one of the most successful examples of mid-century modern molded plywood seating.
Born in New York City, Cherner was an architect and a prolific designer who taught at Columbia University’s Teachers College. An enthusiast of the Bauhaus, he gave lectures in the late 1940s on the principles of the legendary German design school at the Museum of Modern Art.
Cherner was fascinated with the concept of cost-efficient design, and this extended into his pioneering ideas for prefabricated housing. His philosophy was that a modular home should be a complete design concept that included economical furniture and lighting. He published several DIY books, such as How to Build a House for $6,000. Cherner caught the interest of a housing cooperative in upstate New York and was contracted to design and oversee the construction of prefabricated housing in the town of Ramapo. The U.S. Department of Housing assembled a pre-built Cherner home for exhibition in Vienna.
But he is best known for his chair.
In the 1950s, one of George Nelson’s designers, John F. Pile, created the Pretzel chair. It had structural problems and proved too costly to make at Herman Miller, where Nelson was director of design. Production was subcontracted to Massachusetts company Plycraft, but the agreement didn’t last long owing to a dispute between the furniture manufacturers. Based on a recommendation from Nelson, Plycraft sought out Cherner to redesign the chair so that it would be durable and affordable to produce.
Cherner submitted his redesign only to be told that Plycraft had shelved the project. However, Plycraft secretly began producing what would become the Cherner chair under a different name — and Cherner later stumbled across his seat in New York. Cherner sued Plycraft and won. The chair became instantly popular after being featured in a Norman Rockwell illustration for a Saturday Evening Post cover in September of 1961.
Other noteworthy Cherner designs include his Konwiser furniture line, Multiflex storage units and tube lighting. The Museum of Modern Art praised his Konwiser collection as “some of the most progressive furniture designs available to the American public.”
In 1972, Plycraft discontinued production of his chair, and Cherner died in 1987. In 1999, his two sons founded the Cherner Chair Company and began making furniture based on their father's original designs for armchairs, chairs — including the Cherner chair — tables and credenzas.
Find vintage Norman Cherner furniture on 1stDibs today.
- Norman Cherner Cabinet for Multiflex Corp.By Norman Cherner, Multiflex Corp.Located in New York, NYModular "Studio Group" cabinet composed of walnut with a white micarta top, lacquered masonite doors and panels, and angle-steel pulls and frame. The “Curtainwall” principle applied to furniture, allowing easy extension in either a vertical or horizontal direction. An elegant riff on the Eames ESU, designed by Norman Cherner (along with Matthew Cooper) and manufactured by the Multiflex Corp circa 1954. The Studio Group was featured in George Nelson’s Storage book and was a MoMA Good Design selection in 1954. The present unit has two sliding door cabinets flanking a bank of three drawers. Behind each pair of sliding doors is a black masonite bottom and white masonite back. The frame, which disassembles to a large degree, is held together with brass buttons that are optionally visible on the outside (MoMA preferred visibility as expressive and suitable to the piece). Cherner famously designed the narrow-waisted Plycraft armchair along with an award-winning furniture line for Konwiser and was the author of the 1953 book Make Your Own Modern Furniture. Along with a nine drawer chest of drawers and a double-tall unit...Category
Vintage 1950s American Mid-Century Modern Cabinets
MaterialsSteel
- Norman Cherner Chest of Drawers for Multiflex CorpBy Norman Cherner, Multiflex Corp.Located in New York, NYModular nine-drawer "Studio Group" chest composed of walnut with a white micarta top, lacquered masonite drawer bottoms and angle-steel pulls and frame. The “Curtainwall” principle applied to furniture, allowing easy extension in either a vertical or horizontal direction. An elegant riff on the Eames ESU, designed by Norman Cherner (along with Matthew Cooper) and manufactured by the Multiflex Corp circa 1954. The present unit has three banks of three drawers; the full-length angled steel pulls contribute to the overall graphic scheme of contrasting stripes. The Studio Group was featured in George Nelson’s Storage book and was a MoMA Good Design selection in 1954. The frame, which disassembles to a large degree, is held together with brass buttons. Cherner famously designed the narrow-waisted Plycraft armchair along with an award-winning furniture line for Konwiser and was the author of the 1953 book Make Your Own Modern Furniture. Along with a sliding door cabinet and a double-tall unit...Category
Vintage 1950s American Mid-Century Modern Commodes and Chests of Drawers
MaterialsSteel
- Norman Cherner Double High Cabinet for Multiflex Corp.By Norman Cherner, Multiflex Corp.Located in New York, NYStacked and fastened "Studio Group" modular units composed of walnut, angled steel, and lacquered masonite. with sliding doors at top and an open compartment at bottom. The “Curtainw...Category
Vintage 1950s American Mid-Century Modern Cabinets
MaterialsSteel
- Tepper-Meyer Versi-TableBy Gene TepperLocated in New York, NYUp-and-down "Versitable" by Tepper-Meyer Associates of San Francisco, produced by Fred Meyer circa 1954. The two-position design can function as a dining or writing table in the high...Category
Vintage 1950s American Mid-Century Modern Dining Room Tables
MaterialsSteel
$3,600 - Folding Plywood Child's ChairBy Norman ChernerLocated in New York, NYFolding child’s chair composed of three pieces of cut plywood, a canvas sling, and steel pins. The frame pivots open and closed via the pins and a groove cut into the plywood seat. American, circa 1950, in an organic design idiom in the manner of Norman Cherner or Arthur Collani, both of whom provided blueprints for DIY projects. As with analogous Shaker furniture...Category
Vintage 1950s American Mid-Century Modern Chairs
MaterialsCanvas, Plywood
- Bertha Schaefer Brass and Glass Cocktail Table for M. Singer and SonsBy M. Singer & Sons, Bertha SchaeferLocated in New York, NYSpare and architectonic brass cocktail table with gently sinuous curves and original glass top. A Bertha Schaefer design for M. Singer and Sons, circa 1954. Rare to the market. Docum...Category
Vintage 1950s American Mid-Century Modern Coffee and Cocktail Tables
MaterialsBrass
- Norman Cherner for Plycraft Mid Century Walnut Round Expanding Dining TableBy Plycraft, Norman ChernerLocated in Countryside, ILNorman Cherner for Plycraft mid century walnut round expanding dining table This table measures: 42 wide x 42 deep x 29.25 inches high, wit...Category
Vintage 1970s American Mid-Century Modern Dining Room Tables
MaterialsWalnut
- Table by Norman Cherner for Konwiser MOMA Exhibit Good Design Mid-Century ModernBy Norman ChernerLocated in Hyattsville, MDRare petite side table, awarded MoMA's Good Design distinction. Tabletop surface and edge has been restored. There is a very shallow small indention on the...Category
Vintage 1950s American Mid-Century Modern Side Tables
MaterialsIron
$838 Sale Price49% Off - Cherner Studio DeskBy Norman Cherner, The Cherner Chair CompanyLocated in Berkeley, CAThe new Studio desk is designed for Designers. Available in two sizes to fit your workspace. Made to last with all cross-ply plywood construction and soli...Category
21st Century and Contemporary American Mid-Century Modern Desks and Writ...
MaterialsWalnut
$2,879 / item - George Nelson X-Leg Table for Herman MillerBy Herman Miller, George NelsonLocated in Los Angeles, CAGeorge Nelson X-Leg Table for Herman Miller. Originally designed and produced in the 1950s this was made as a work table for an office but equally intended for a dining space as well...Category
Vintage 1950s American Mid-Century Modern Dining Room Tables
MaterialsChrome
- Studio BBPR for Olivetti 'Spazio' Multifunctional TableBy Olivetti, Studio BBPRLocated in Waalwijk, NLStudio BBPR for Olivetti, 'Spazio' table, coated steel, plastic, vinyl, Italy, 1960s. In 1954, Olivetti, the Italian office equipment manufacturer, hir...Category
Vintage 1960s Italian Mid-Century Modern Dining Room Tables
MaterialsSteel
- Walnut 1960s Table by Silvio Coppola for BerniniBy Silvio Coppola, BerniniLocated in Varese, LombardiaTable in solid walnut and veneer produced in the 60s by Bernini based on a design by Silvio Coppola. The table remains in general rather good condition: having not undergone any rest...Category
Vintage 1960s Italian Mid-Century Modern Dining Room Tables
MaterialsWalnut