Steel Shelves and Wall Cabinets

Lyby Mobler Mid Century Danish Teak and Steel 4-Bay Freestanding Wall Unit This wall unit measures: 147 wide x 17 deep x 72.5 inches high, with a chair clearance of 24 inches All p...

String wall shelf wall unit designed by Nils and Kajsa Strinning in 1949. This one was made in the 1960s in Sweden. A good vintage condition, traces of use due to the age, yellowed h...

Large modular rosewood bookcase/wall unit by Osvaldo Borsani for Tecno (ca. 1960, Italy). Composed of six gold aluminum uprights forming five bays/sections with the five original, re...

Introducing an extraordinary mid-century wall-mounted floating three-tier console, a sought-after piece designed by the esteemed Paul McCobb for Bryce Originals in the 1950s. With it...

Clef de Sol bookshelf Produced by Ateliers Matégot France, c.1955 White painted metal (later painted) documentation : - MONDINEU, Mathieu Mategot, éd. Jousse Ets, Paris, 2003, p.229...

Yellow painted steel and rattan wall shelf designed by Raoul Guys in exceptional original condition Manufactured by Airborne France circa 1950 Similar example can be found in  Mo...

Urio modular bookcase designed in the 1960s by Ico and Luisa Parisi for M.I.M. Rome. The bookcase consists of four modules that also have the optional back panels that were sold sepa...

1960s sculpted bronze wall mount console designed by Paul Evans and produced by Directional. New glass top. Original wall mount brackets.

Beautiful Patina on this dark teak String Unit original from 1950. Featuring 8 shelves that are adjustable along the ladder work using the built in brass c...

A fine English wall-mounted train carriage or luggage rack shelf of polished aluminum and brass and steel mesh, from the early 20th century, featuring s...

Enzo Mari dima modular wall shelving system for Simon International Dima Italy, circa 1970 Enameled steel, shelves adjustable with solid plastic holders...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

Tejo Remy (1960) is a Dutch designer renowned for his industrial and brutalist aesthetics. He began designing for Droog Design in 1991 and now works together...

Wall-mounted cabinet model PE-19 designed by Paul Evans for Directional, 1965. Cabinet is in very good condition with welded steel exterior panels with slate top. The cabinet has nev...

String regal wall unit designed by Nils and Kajsa Strinning in 1949. This one was made in the 1960s in Sweden. A very good vintage condition, slight trac...

Italian modern Large shelf in black wood and steel, 1980s Large shelf with rectangular top in black painted wood and steel finishes. The shelf has a vertical axis on which the 3 ste...

Italian modern Shelf in black wood and steel, 1980s Shelf with rectangular top in black painted wood and steel finishes. The shelf has a vertical axis on ...

Italian mid-century pair of wooden shelves, 1980s. Pair of black painted wooden shelves with steel finishes in different sizes. 1980s. Go...

Industrial modular shelving with 20 adjustable shelves in a amazing color mounting on a black frame.

A teak wall mount credenza / cabinet with two sliding doors and four drawers. Designed by Hans Wegner, made by Johannes Hansen, Denmark, 1952.

Tall Maison Jansen style Hollywood Regency, steel and glass etagere, elaborate hand made, with decorative top and base .unique size and scale. 5 glass shelves in all, vintage patina ...