Vintage Gold white stone bangle bracelet

Roberto Cavalli crocodile bracelet NWOT

1980s Silver 925 + 18kt yellow Gold Bangle

Vintage gold tone bangle bracelet

18Kt Gold Vintage Bracelet from the 1980s Totally Handmade with diamonds Size and measurements: 19 cm lenght

1.05 Carat Natural Diamond Cross Bangle Bracelet 14K White Gold 7'' 100% Natural Diamonds, Not Enhanced in any way Round Cut Diamond Bracelet 1.05CT G-H SI 14K White Gold, Pron...

I created this bangle with heavy gauge Ohio steel that I hand-worked into shape. This open bangle is worn by sliding your wrist through the bangle's narrow opening. It's rigid enough to retain its shape, but flexible enough to fit many wrists. Use two hands to carefully narrow or widen if needed. Adorning the bangle are eight highly translucent slightly bluish-green hand-carved jadeite jade rondel beads from Guatemala, each of which measures almost 10mm. They are accompanied by a pair of 8mm agarwood (or oud) wood beads. Agarwood is a rare wood prized for centuries as a perfume ingredient and an expensive one at that. The aroma is a result when a particular species of tree native to Asia becomes infected with a particular bacteria. The longer and more intense the infection, the greater the smell. These are not antique beads, so their aroma is extremely subtle. A 12.45mm Guatemalan jadeite bead serves as the focal point and a pair of small (4.29mm) 18K yellow gold rings serve as bookends on either side. Like most of the pieces in this collection, there is no lab certification included for the jade. This saves money and helps me keep the price down but does require a leap of faith on your end. All of the jade I use in my collection are from previously-tested "batches" from specific suppliers and all previous samples have tested as "A" jade. I only use "leftover" jade beads that I had in my collection after creating a necklace and then sending that necklace to the gem lab for testing and certification. Even though I can identify jade treatments with about 99% accuracy, I only sell jade that has been lab tested and is natural and untreated. Even my nephrite has been tested, which is highly uncommon in the industry. Yet Tiffany & Co. coats their nephrite necklaces...

I created this bangle with heavy gauge Ohio steel that I hand-work into shape. This open bangle is worn by sliding your wrist through the bangle's narrow opening. It's rigid enough to retain its shape, but flexible enough to fit many wrists. Use two hands to carefully narrow or widen if needed. Adorning the bangle are ten highly translucent earth-toned hand-carved jadeite jade beads from Burma (Myanmar), each of which measures approximately 8mm. They are accompanied by a pair of 6.8mm 18k yellow gold rings. A 9.81mm sage green opaque (yet translcent) focal point bead resides in the center. Like most of the pieces in this collection, there is no lab certification included for the jade. This saves money and helps me keep the price down but does require a leap of faith on your end. All of the jade I use in my collection are from previously-tested "batches" from specific suppliers and all previous samples have tested as "A" jade. I only use "leftover" jade beads that I had in my collection after creating a necklace and then sending that necklace to the gem lab for testing and certification. Even though I can identify jade treatments with about 99% accuracy, I only sell jade that has been lab tested and is natural and untreated. Even my nephrite has been tested, which is highly uncommon in the industry. Yet Tiffany & Co. coats their nephrite necklaces...

I created this jadeite jade bead bangle with heavy gauge Ohio steel that I hand-worked into shape. This open bangle is worn by sliding your wrist through the bangle's narrow opening. Then you slide the "S" through the loop. It measures 9" in length but the beads add thickness making it wear more like an 8.5" bracelet. It can fit many different wrist sizes. As long as your hand measures more than 70mm from knuckle to knuckle, it won't slide off your hand. But an individual with a large to extra-large hand and wrist will probably find this bangle most comfortable. You can wear it alone or stacked with others. Twenty-six hand-carved beads move freely along the steel. These are untreated hand-cut and polished beads in a variety of green and greenish-gray tones. The beads range in size from 6.40mm to 8.24 and they average 8mm. A 7.6mm gold ring serves as a slender focal point. Like most of the pieces in this collection, there is no lab certification included for the jade. This saves money helps me keep the price down, but does require a leap of faith on your end. All of the jade I use in my collection are from previously-tested "batches" from specific suppliers and all previous samples have tested as "A" jade. I only use "leftover" jade beads that I had in my collection after creating a necklace and then sending that necklace to the gem lab for testing and certification. Even though I can identify jade treatments with about 99% accuracy, I only sell jade that has been lab tested and is natural and untreated. Even my nephrite has been tested, which is highly uncommon in the industry. Yet Tiffany & Co. coats their nephrite necklaces...