Piero Manzoni

Merda d'Artista - Merde d'Artiste - Artist's Shit Limited Edition sealed tin can

2013

Arman Filetto Al Barolo - Barolo - New York, NY, 1998 Ceramic Plate Signed in plate, Artist signature fired into the plate on the front and back and numbered 157 from the edition of 1000. (far fewer made) 10 3/10 inches diameter by 1/4 inches height Unframed Very rare as only a fraction were actually made, and many were thought to have been lost after 9/11. Makes a memorable and very special gift! This beautiful, extremely rare limited edition, signed and numbered bowl...

Peter Halley Uovo In Raviolo Alla Bergese - San Domenico - New York, NY, ca. 2000 Limited Edition Ceramic Plate. Artist signature fired into the plate on the underside and numbered 166 from the edition of 510. 10 3/10 inches diameter by 1/4 inch height Makes a terrific gift. This beautiful, limited edition, extremely rare, plate signed and numbered bowl/plate was handmade in southern Italy by master artisans near Vietri sul Mare. The edition is 510 - but the reason one rarely sees this on the market is because only about half that amount were said to have been created, and the remaining ones were lost after 9/11; the plan was to create a second batch after these sold out. That was in the year 2000. Then in 2001 terrorists struck the World Trade Center. All marketing efforts ceased. It is not even known if the other plates from this edition are still around - but they are rarely found on the marketplace. It was designed by the internationally renowned American artist Peter Halley. In 2000, Buon Ricordo...

Seymour Lipton Maquette for Laureate, ca. 1968-1969 Nickel silver on monel metal Unique 18 × 8 1/2 × 7 inches Marlborough-Gerson Gallery, New York Acquired from the above by the previous owner, 1969 thence by descent Christie's New York: Monday, June 30, 2008 [Lot 00199] Acquired from the above Christie's sale This unique sculpture by important Abstract Expressionist sculptor Seymour Lipton is a maquette of the monumental sculpture "Laureate" - one of Lipton's most iconic and influential works located on the Riverwalk in downtown Milwaukee, Wisconsin. Laureate is a masterpiece that was commissioned by the Allen-Bradley Company in memory of Harry Lynde Bradley and as an enhancement for the newly constructed Performing Arts Center. It is located on the east bank of the Milwaukee River at 929 North Water Street. The Bradley family in Milwaukee were renowned patrons of modernist sculpture, known for their excellent taste who also founded an eponymous sculpture park. For reference only is an image of the monumental "Laureate" one of Milwaukee's most beloved public sculptures. According to the Smithsonian, which owns a different unique variation of this work, "The full-size sculpture Laureate was commissioned by the Marcus Center for the Performing Arts in Milwaukee. In the initial drawings, Seymour Lipton combined details from the architectural plan with a wide variety of images, ranging from musical instruments to a lighthouse on the island of Tobago. He transformed the basic shapes from these sketches into a welded sculpture, which evokes a figure composed of columns, harp strings, and coiled rope. Lipton created this piece to celebrate achievement in the arts. The dramatic silhouette commands your attention, reflecting the title Laureate, which means worthy of honor and distinction. The final version of the piece is over twelve feet high and stands out against the pale, flat buildings of the arts center.,," Provenance Marlborough-Gerson Gallery, New York Acquired from the above by the previous owner, 1969 thence by descent Christie's New York: Monday, June 30, 2008 [Lot 00199] Acquired from the above Christie's sale About Seymour Lipton: Born in New York City in 1903, Seymour Lipton (1903-1986) grew up in a Bronx tenement at a time when much of the borough was still farmland. These rural surroundings enabled Lipton to explore the botanical and animal forms that would later become sources for his work. Lipton’s interest in the dialogue between artistic creation and natural phenomena was nurtured by a supportive family and cultivated through numerous visits to New York’s Museum of Natural History as well as its many botanical gardens and its zoos. In the early 1920s, with the encouragement of his family, Lipton studied electrical engineering at Brooklyn Polytechnic Institute and pursued a liberal arts education at City College. Ultimately, like fellow sculptor Herbert Ferber, Lipton became a dentist, receiving his degree from Columbia University in 1927. In the late 1920s, he began to explore sculpture, creating clay portraits of family members and friends. In addition to providing him with financial security, dentistry gave Lipton a foundation in working with metal, a material he would later use in his artwork. In the early 1930s, though, Lipton’s primary sculptural medium was wood. Lipton led a comfortable life, but he was also aware of the economic and psychological devastation the Depression had caused New York. In response, he generally worked using direct carving techniques—a form of sculpting where the artist “finds” the sculpture within the wood in the process of carving it and without the use of models and maquettes. The immediacy of this practice enabled Lipton to create a rich, emotional and visual language with which to articulate the desperation of the downtrodden and the unwavering strength of the disenfranchised. In 1935, he exhibited one such early sculpture at the John Reed Club Gallery in New York, and three years later, ACA Gallery mounted Lipton’s first solo show, which featured these social-realist-inspired wooden works. In 1940, this largely self-taught artist began teaching sculpture at the New School for Social Research, a position he held until 1965. In the 1940s, Lipton began to devote an increasing amount of time to his art, deviating from wood and working with brass, lead, and bronze. Choosing these metals for their visual simplicity, which he believed exemplified the universal heroism of the “everyman,” Lipton could also now explore various forms of abstraction. Lipton’s turn towards increasing abstraction in the 1940s allowed him to fully develop his metaphorical style, which in turn gave him a stronger lexicon for representing the horrors of World War II and questioning the ambiguities of human experience. He began his metal work with cast bronze sculptures, but, in 1946, he started welding sheet metal and lead. Lipton preferred welding because, as direct carving did with wood, this approach allowed “a more direct contact with the metal.”[ii] From this, Lipton developed the technique he would use for the remainder of his career: “He cut sheet metal, manipulated it to the desired shapes, then joined, soldered, or welded the pieces together. Next, he brazed a metal coating to the outside to produce a uniform texture.”[iii] In 1950, Lipton arrived at his mature style of brazing on Monel metal. He also began to draw extensively, exploring the automatism that abstract expressionist painters were boasting at the time. Like contemporaries such as Jackson Pollock, Lipton was strongly influenced by Carl Jung’s work on the unconscious mind and the regenerative forces of nature. He translated these two-dimensional drawings into three-dimensional maquettes that enabled him to revise his ideas before creating the final sculpture.The forms that Lipton produced during this period were often zoomorphic, exemplifying the tension between the souls of nature and the automatism of the machine. In the years following the 1950s, Lipton’s optimism began to rise, and the size of his work grew in proportion. The oxyacetylene torch—invented during the Second World War—allowed him to rework the surfaces of metal sculptures, thus eliminating some of the risks involved with producing large-scale finished works. In 1958, Lipton was awarded a solo exhibition at the Venice Biennale and was thus internationally recognized as part of a small group of highly regarded avant-garde constructivist sculptors. In 1960, he received a prestigious Guggenheim Award, which was followed by several prominent public commissions, including his heroic Archangel, currently residing in Lincoln Center’s David Geffen Hall. A number of important solo exhibitions of his work followed at The Phillips Collection in Washington, DC (1964); the Milwaukee Art Center and University of Wisconsin, Milwaukee (1969); the Virginia Museum of Fine Arts in Richmond (1972); the Everson Museum in Syracuse, NY (1973); the Herbert E. Johnson Museum of Art of Cornell University in Ithaca, NY (1973); the National Collection of Fine Arts, Smithsonian Institution (now the Smithsonian American Art Museum) in Washington, DC (1978); and a retrospective in 1979 at The Jewish Museum in New York. In 1982 and 1984 alone, two exhibitions of his sculpture, organized respectively by the Mint Museum (Charlotte, NC) and the Hillwood Art Gallery of Long Island University (Greenvale, NY), traveled extensively across museums and university galleries around the nation. In 2000, the traveling exhibition An American Sculptor: Seymour Lipton was first presented by the Palmer Museum of Art of Pennsylvania State University in University Park. Most recently, in 2009, the Ackland Art Museum in Chapel Hill, NC mounted The Guardian and the Avant-Garde: Seymour Lipton’s Sentinel II in Context. Since 2004, Michael Rosenfeld Gallery has been the exclusive representative of the Estate of Seymour Lipton and has presented two solo exhibitions of his work—Seymour Lipton: Abstract Expressionist Sculptor (2005) and Seymour Lipton: Metal (2008). In 2013, Michael Rosenfeld Gallery presented Abstract Expressionism, In Context: Seymour Lipton, which included twelve major sculptures by the artist, along with works by Charles Alston, Norman Bluhm, Beauford Delaney, Willem de Kooning, Jay DeFeo, Michael Goldberg, Adolph Gottlieb, Hans Hofmann, Lee Krasner, Norman Lewis, Conrad Marca-Relli, Boris Margo, Alfonso Ossorio, Richard Pousette-Dart, Milton Resnick, Charles Seliger...

Peter Reginato Abstract Bronze Sculpture, ca. 1987 Bronze Signed on the underside 4 × 6 1/2 × 5 1/2 inches This bronze sculpture is by the American abstract sculptor Peter Reginato. ...

Artist: Christo Title: Wrapped Cans, Wrapped Bottle, Satani Gallery Tokyo Poster Medium: Offset lithograph Date: 1991 Edition: Unnumbered Sheet Size: 30 1...

Italian coffee table Merda di Designer by Niccolò Spirito, 2024 Coffee table mod. Merda di Designer with a round base. The edge of the top and base are rounded and painted silver. Th...

Painted Terracotta sculture realized by Sirio Pellegrini in 1960s. Good condition. Sirio Pellegrini, born in Rome on March 1, 1922, of Abruzzo origins (Capestrano), spent his child...

Aluminum mounted giclee archival print. Ltd Ed 3/20. Sits about an inch off the wall. ABOUT THE ARTIST Marco studied fine art at Pratt Institute and the Art Students League in New York. New York Times photography critic Gene Thornton called Marco “a Minimalist, whose images are sensual, whimsical, often surreal, always strong, and deceptively simple.” “I’ve had the pleasure of working with Phil Marco on a number of my films. Phil is a man of extraordinary talents. It seems that his passion is to take an everyday object or event, and show it in an entirely new and exciting way.” Martin Scorsese. Phil’s work is represented in MOMA, The Museum of the Moving Image, and The George Eastman Museum of Photography. His first photographs were studies for his paintings, before he launched a career in print advertising. He eventually became a Director / DP for film and television for a vast base of national and international clients with his wife Patricia as Partner and Producer. In the 1980’s and 90’s Phil was the go to person for Special Effects in Television and Cinema, also best known for his graphic conceptual still lives, and his consummate mastery of lighting, and design. He’s won many awards for his work, including numerous Cannes Lions, Cleo’s, a Grammy for his print work on the legendary “Tommy the Who...