Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 11

Four Red 'Selene' Chairs Artemide Design by Vico Magistretti 1970s

About the Item

Set of red plastic chairs designed by Vico Magistretti and produced by Artemide in the 1970s.
  • Creator:
    Vico Magistretti (Designer)
  • Design:
  • Dimensions:
    Height: 29.73 in (75.5 cm)Width: 18.71 in (47.5 cm)Depth: 20.28 in (51.5 cm)Seat Height: 17.72 in (45 cm)
  • Sold As:
    Set of 4
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1970s
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Milano, IT
  • Reference Number:
    1stDibs: LU1721245150782

More From This Seller

View All
Chair 905 by Vico Magistretti for Cassina 1970s
By Vico Magistretti
Located in Milano, IT
Chair with armrests, lacquered wood, leather. Good conditions.
Category

Vintage 1970s Italian Mid-Century Modern Chairs

Materials

Leather, Wood

'Stadio 100' table by Vico Magistretti Production Artemide 1970s red
By Vico Magistretti
Located in Milano, IT
Vintage red plastic dining table with square top and rounded corners.
Category

Vintage 1970s Italian Mid-Century Modern Tables

Materials

Plastic

'Eclisse' lamp by Vico Magistretti 1970s
By Vico Magistretti
Located in Milano, IT
Iconic white enameled metal table lamp model 'Eclisse' awarded the Compasso d'Oro in 1967. Good conditions.
Category

Vintage 1970s Italian Mid-Century Modern Table Lamps

Materials

Metal

'Stadio 150' table by Vico Magistretti white 1970s
By Vico Magistretti, Artemide
Located in Milano, IT
Dining table with rectangular top made of white plastic material and newly renovated lacquer finish. Very good conditions.
Category

Vintage 1970s Italian Mid-Century Modern Tables

Materials

Plastic

Lampadario Omega di Vico Magistretti per Artemide, Anni 60-70
By Artemide, Vico Magistretti
Located in Milano, IT
Lampada a sospensione vintage realizzata in metallo cromato con diffusore e boccia centrale in vetro bianco.
Category

Vintage 1960s Italian Mid-Century Modern Chandeliers and Pendants

Materials

Metal

Four 'Medusa' Chairs by Alberto Bazzani for Tetrarck Studio 1970s
By Studio Tetrarch
Located in Milano, IT
Group of 4 chairs, chrome-plated metal and leather. Good conditions.
Category

Vintage 1970s Italian Mid-Century Modern Chairs

Materials

Metal

You May Also Like

Vico Magistretti Set of Two Red Selene Chairs by Artemide 1970s
By Artemide, Vico Magistretti
Located in Montecatini Terme, IT
A set of two Selene stackable chairs in red resin reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Artemide Milano in the 1970s. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...
Category

Vintage 1970s Italian Mid-Century Modern Chairs

Materials

Plastic, Rubber

Vico Magistretti for Artemide Pair of Red Vicario Chairs, Italy 1970s
By Artemide, Vico Magistretti
Located in Naples, IT
The Vicario armchair was designed by Vico Magistretti at the end of the 1960s for Artemide. Made of ABS plastic, this chair features flowing shapes and a perfect balance of design, f...
Category

Vintage 1970s European Mid-Century Modern Chairs

Materials

Plastic

Gaudi Charis by Vico Magistretti for Artemide, 1970s
By Vico Magistretti
Located in toronto, CA
Designed by Vico Magistretti for Artemide Italy in the 1970's. - Off-white fiberglass. In great vintage condition Vico was an Italian architect who was also active as an industrial...
Category

Vintage 1970s Italian Mid-Century Modern Chairs

Materials

Fiberglass

Set of 4 Orange Selene Chairs by Vico Magistretti for Artemide, Italy 1969
By Artemide, Vico Magistretti
Located in Roma, IT
Wonderful set of 4 orange Selene chairs. These iconic chairs were designed by Vico Magistretti and produced by Artemide in Italy in 1969. Fully original and in great vintage conditi...
Category

Vintage 1960s Italian Mid-Century Modern Chairs

Materials

Plastic

Italian glossy black plastic Selene chairs, Vico Magistretti for Artemide, 1960s
By Artemide, Vico Magistretti
Located in MIlano, IT
Selene chairs, of modern Italian design, entirely in glossy black plastic, designed by Vico Magistretti for Artemide in the 1960s. Pair of Selene model chairs with monocoque structur...
Category

Vintage 1960s Italian Mid-Century Modern Chairs

Materials

Plastic

Vico Magistretti Set of Nine Red Selene Chairs by Heller 2002s
By Vico Magistretti, Heller
Located in Montecatini Terme, IT
Set of nine Selene stackable chairs in red polyester reinforced with fiberglass, designed by Vico Magistretti in 1967 and produced by Heller in 2002. The Selene chair was designed in 1967 by Magistretti to be produced in a plastic material, as he affirmed: "The seat and the back are simple curved surfaces. For me, the legs represented the real image of the piece, with as small a volume as that of any common wooden chair. I solved it by exploiting the molding of a plastic material formed by a simple 3-millimeter-thick sheet with a simple but very resistant "S" cross-section which inter-related the object with ordinary chairs without however the elephant legs so untypical of chairs. It was fun working with the model maker on the wood model." When produced in series, "a unit comes out of the machine every five minutes": Selene is the fruit of a single compression molding process on a pre-impregnated sheet (Ottagono 15 / 1969). Magistretti solves the problem of leg resistance by adopting an "S-shaped" configuration that confers resistance to a sheet only 3 millimeters thick. The formal and structural solution had already been previously adopted for the Chimera lamp (a self-supporting methacrylate sheet) and in developing the legs of the Demetrio table...
Category

Early 2000s European Mid-Century Modern Chairs

Materials

Plastic, Rubber

Recently Viewed

View All