Walnut Shelves and Wall Cabinets

This Wall shelf or bookcase was made in the former Czechoslovakia in the 1930s, It´s made of walnut, you hang it on the wall using two screws. Dimensions of the shelves: 70x23x3cm ...

This listing is for a Mid-Century Modern Founders Chrome & Walnut Etagere. Featuring a straight line design, floating walnut chest of three drawers, walnut shelves, chrome pillars, a...

Found in Italy, this wall-mounted cabinet dates from the 1960s. Cabinet has a walnut base with sliding clear glass doors and glass interior shelves. Unknown maker.

Vintage George Nelson CSS Wall Mounted Shelving Unit 1960s CSS wall unit designed by George Nelson for Herman Miller 1960's example with two bays of shelving Three shelves with adju...

An unusual and rare wall mounted vanity from the 1964 Herman Miller accessory line to the CSS storage system. A collaborative design by Alexander Girard...

This beautiful Modular book case was designed by Alfred Hendrickx for Belform in the early 1960s Belgium handcrafted furniture. It has a Minimalist l...

Organic Modern authentic vintage wall shelf by Carl Auböck Mod. 124 from brass and walnut 1950s Vienna. An iconic authentic wall shelf or wall board Mod. 124 by Carl Auböck from wa...

Large 47 inches Vintage, hand carved walnut French wall shelf. Numbered item made in France exclusively for Bloomingdale in the 1960s. Very good ...

Rare Danish Mid-Century Modern wall hanging cabinet, with original sliding mirrored glass doors. The case is of solid walnut, the sliding doors ar...

Vintage Scandinavian Modern wall unit system 2 bay in walnut wood. Unmarked. Attribution Poul Cadovius for Royal System. Two cabinets wit...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

George III style wall curio or display cabinet, circa mid 20th century. Made of walnut featuring a broken pediment top, interior shelves with optional inser...

An eye-catching mid-century Italian wall unit or bookcase made from gilded metal and walnut shelves that can be adapted to any setting due to its lightness and refinement. The bookcase is composed of N.5 track supports, N.16 shelves brackets, N.4 shelves length 60 cm,n.4 walnut shelves length 110 cm. Its originality lies in its ability to be assembled according to your needs (both in terms of length and shelving arrangement), even if you want you can get two divided wall units, a module with two supports and another with three supports. During the restoration, it was decided to remove the old screw holes on the shelves in order to have more options...

Midcentury American designer Paul McCobb freestanding Maple with walnut finish room divider for Planner Group. Unit is Solid Maple wood with Walnut brown lacquer finish. This unit is in vintage condition - Has lower cabinet and (1) lower drawer - all maple with an original Walnut lacquer finish - Original Solid brass knobs...

Large Italian console or wall shelf from the 1950s. The console is attributed to the great designer Melchiorre Bega because of its shape and line...

An Edward Wormley designed shelf in solid walnut supported by two (2) laminated mahogany brackets in the original black lacquer finish. Manufactured by Dunbar in the 1960s. Shelf is ...

Bert England for Johnson furniture wall-mounted cabinet, leather covered doors with brass stud hardware.

An excellent Mid-Century Italian Tyrolean kitchen shelf or plate rack, with four drawers in massive blond walnut, wax polished. A very useful item for y...

Designed by Edward Wormley for Dunbar. Long John Shelf can be used as shelf or console. Walnut wood with great sapwood striped details.

Parisi revisited a project done in 1946 for Arte Casa Cantù, updating materials and production technology for Industrial production required in the late 1950s. The bookcase is compr...

An early wall hanging walnut cabinet crafted in collaboration between Paul Evans (1931 - 1987) and Phillip Lloyd Powell (1919 - 2008) when they ...

George Nelson OMNI Walnut Wall Unit, ca. 1960. Beautiful original early OMNI walnut and aluminum wall unit by George Nelson for Herman Miller. Original shelving with 3 shelves, one magazine rack and one larger desk. Includes wall mounting hardware and all shelving brackets as shown, even the original tool for adjusting shelving heights. Walnut shelves are in very good original condition would rate as a 8.5/10 and the poles are excellent and include original pole end cushions/stoppers. Inquire for shipping quote, due to the dimensions the quote listed is higher than actual cost. As shown measures 64" W x 88" H x 19.5" D (Wall mounting hardware not included, you will need secure drywall anchors or bolts, consult your contractor) The OMNI shelving system emerged in conjunction with a complete corporate design program for Structural Products Inc. of Charlotte, Michigan, a subsidiary of Aluminum Extrusions. The goal was to find new ways of using the extruded aluminum products made by the company. The shelving system is supported by aluminum rods. These rods are either rectangular (with slits on each side) or round (with six slits). They are inserted using springs on both ends between floor and ceiling, and are cut to suit this purpose. In the slits, horizontal aluminum supports can be inserted for the shelves and shelving modules. The various components—storage elements, table panels, and lamps—make the shelf into a kind of all-purpose item for varied situations: living room, study, kitchen, or office. The OMNI shelving system can be seen as a further development of the StrucTube system that Nelson had developed for use in exhibitions and was used at Colonial Williamsburg. At the same time, the OMNI shelving system is the predecessor of the Comprehensive Storage...

George Nelson for Herman Miller Omni wall unit 98" wide. George Nelson designed, Omni Systems wall unit in great condition. There are nine shelves, ...