Skip to main content

Evans Products Company Abstract Sculptures

to
1
1
1
1
1
1
1
1
1
1
1
Height
to
Width
to
1
1
1
17
366
88
81
76
Creator: Evans Products Company
Classic First Year Production Eames LCW, Evans Label 5 2 5 Screw Configuration
By Charles Eames, Evans Products Company, Herman Miller
Located in Buffalo, NY
One of the nicest examples I ve owned in quite a while, stunning figured birch plywood, circa early 1946-1947, L C W (Lounge chair wood) designed by Charles and Ray Eames, Manufactur...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Birch, Plywood

Related Items
Tony Evans Evans Studio Raku Ceramic Pottery Bear Sculpture
By Tony Evans
Located in Chattanooga, TN
This striking raku-fired ceramic bear by artist Tomi Evans is a powerful blend of earthy elegance and raw natural form. Sculpted with gentle, abstract lines, the bear embodies a quie...
Category

1980s American Modern Vintage Evans Products Company Abstract Sculptures

Materials

Ceramic

Henry Moore Austin Productions
By Henry Moore, Austin Productions
Located in Philadelphia, PA
Austin productions Henry Moore Style Statue. Signed and dated 1964 to back. In overall very good condition with a little paint loss as seen in photos.
Category

1960s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plaster

Henry Moore Austin Productions
Henry Moore Austin Productions
$495
H 14 in W 8.5 in D 6.5 in
Wave Lounge by Eduard Locota. Turquoise-Blue Acrylic Glass Sculptural Design
By Eduard Locota
Located in Timisoara, RO
Once upon a time, in the middle of the Ocean, on a very still day, while the sun was shining, a wave has appeared. Why did the wave appear exactly at that place and time? Nobody knows. What we know for centuries, is that the Ocean is never still, and always has waves at the horizon. We know that a wave is only energy. Energy transmitted through particles of water, causing it to swirl into an endless circular motion. And if not obstructed, waves have the potential to travel across an entire ocean basin. The story of the Wave Lounge was born once upon a time, while gazing at the never-ending blue horizon. Inspired by the vast energy of the wind and sea strongly colliding together, the idea of this monolithic functional sculpture was thus born. The concept As a piece of the Ocean, a strong presence of mass was needed in the style of Wave Lounge. The twist of a wave near braking point, encapsulated in time, that will completely charm the viewer’s eyes. With a total neglect for traditional design, this fully functional design piece will undoubtedly generate emotions. Be prepared to take a large slice of wave right into your home. Build process Build fully by hand, with acrylic glass as a primary material. For each piece, literally over 200 Kg of material was used for this monolithic functional artwork. it is necessary to pour over 60 colored layers of liquid acrylic...
Category

2010s Balkan Modern Evans Products Company Abstract Sculptures

Materials

Resin

Wave Lounge by Eduard Locota. Turquoise-Blue Acrylic Glass Sculptural Design
Wave Lounge by Eduard Locota. Turquoise-Blue Acrylic Glass Sculptural Design
$35,446 Sale Price
28% Off
H 23.63 in W 20.48 in D 64.18 in
Paul Evans Sculpture
By Paul Evans
Located in Dallas, TX
An early tabletop sculpture by Paul Evans. This work shows Evans experimentation with surface texture and finish. These same finishes were carried over to his studio furniture. Looki...
Category

1960s Vintage Evans Products Company Abstract Sculptures

Materials

Metal

Paul Evans Sculpture
Paul Evans Sculpture
$5,500
H 6.75 in W 24.5 in D 8 in
Original Sculpture / Seat Mod Up7 Designed by Gaetano Pesce, B&B Italia
By Gaetano Pesce
Located in Ibiza, Spain
The large seat/sculpture mod. Up7, designed by the renowned Italian architect and designer Gaetano Pesce in 1969, represents a milestone in contemporary furniture design. Produced by B&B Italia as part of the UP series...
Category

Early 2000s Italian Evans Products Company Abstract Sculptures

Materials

Plastic

Austin Productions Native Family Sculpture
By Austin Productions
Located in Brooklyn, NY
Large sculpture of Native American mother and daughters in bright traditional clothing. Great detailing and use of colors. Please confirm location NY or NJ
Category

1990s Native American Evans Products Company Abstract Sculptures

Materials

Ceramic

Austin Productions Father & Son Sculpture
By Austin Productions
Located in San Diego, CA
Nice sculpture by Austin Production, in plaster stamped 1969.
Category

20th Century American American Classical Evans Products Company Abstract Sculptures

Materials

Plaster

Austin Productions Father & Son Sculpture
Austin Productions Father & Son Sculpture
$220 Sale Price
20% Off
H 16.5 in W 6.75 in D 3.75 in
Unique Gaby Fois Dorell Voyager Lounge Chair and Footstool
By Saporiti, Gaby Fois Dorell
Located in Dronten, NL
Exceptional and rare Voyager lounge chair with footstool designed by artist Gaby Fois Dorell for Saporiti, Italy. Gaby Fois Dorell is a French-American artist and designer known for...
Category

Early 2000s Italian Modern Evans Products Company Abstract Sculptures

Materials

Stainless Steel

Unique Gaby Fois Dorell Voyager Lounge Chair and Footstool
Unique Gaby Fois Dorell Voyager Lounge Chair and Footstool
$10,250 / set
H 47.25 in W 28.35 in D 32.29 in
Alexsander Danel Austin Productions
By Austin Productions
Located in W Allenhurst, NJ
Beautiful contemporary bust sculpture of a woman designed by Alexsander Danel (Russia/Estonia, 1940 - 2001) Marked "Austin Prod Inc. 1990" and sig...
Category

1990s Art Deco Evans Products Company Abstract Sculptures

Materials

Earthenware

Alexsander Danel Austin Productions
Alexsander Danel Austin Productions
$600
H 21.66 in W 6.7 in D 9.85 in
Herman Miller Eames Miniature Stools in Mahogany
By Herman Miller, Charles and Ray Eames
Located in Pasadena, TX
These are miniature examples of the Eames designed stools. There are 3 different examples. These are crafted in mahogany. They were manufactured by Herman Miller. They come with the ...
Category

Late 20th Century American Mid-Century Modern Evans Products Company Abstract Sculptures

Materials

Mahogany

Eames Leg Splint In Original Paper Wrapper Evans Products Co. Birch Plywood 1943
By Charles and Ray Eames
Located in Monrovia, CA
Charles Eames Leg Splint In Original Paper Wrapper Evans Products Company And Is Sealed. 1 Splint Designed by Charles And Ray Eames For The N...
Category

Mid-20th Century American Mid-Century Modern Evans Products Company Abstract Sculptures

Materials

Wood, Birch, Paper

Eames Leg Splint In Original Paper Wrapper Evans Products Co. Birch Plywood 1943
By Charles and Ray Eames
Located in Monrovia, CA
1 Leg Splint In Original Paper Wrapper, Evans Products Co., And Is Sealed. 1 Leg Splint Designed For The Navy, For The United States Of America, Made Of Birch Plywood In 1943. Stock...
Category

Mid-20th Century American Mid-Century Modern Evans Products Company Abstract Sculptures

Materials

Wood, Birch, Paper

Previously Available Items
Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Early Charles Eames D C W 'dining chair wood' 5 2 5 Screw Configuration, Evans
By Evans Products Company, Charles Eames
Located in Buffalo, NY
Early Charles and Ray Eames D C W (dining chair wood) manufactured by Evans, chair dates to mid to late 1940s evident by the 5 2 5 screw configuration, (se...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans with Mahogany Veneer
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. This one is still in its orig...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Two Eames Molded Plywood Leg Splints for Evans Only One in Its Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Charles and Ray Eames Molded Plywood Leg Splint for Evans in Original Wrapper
By Evans Products Company, Charles and Ray Eames
Located in Chicago, IL
These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division. They're still in their origin...
Category

1940s American Mid-Century Modern Vintage Evans Products Company Abstract Sculptures

Materials

Plywood

Evans Products Company abstract sculptures for sale on 1stDibs.

Evans Products Company abstract sculptures are available for sale on 1stDibs. These distinctive items are frequently made of wood and are designed with extraordinary care. There are many options to choose from in our collection of Evans Products Company abstract sculptures, although brown editions of this piece are particularly popular. Many of the original abstract sculptures by Evans Products Company were created in the mid-century modern style in united states during the 1940s. If you’re looking for additional options, many customers also consider abstract sculptures by Charles Eames, Herman Miller, and Yehuda Dodd Roth. Prices for Evans Products Company abstract sculptures can differ depending upon size, time period and other attributes — on 1stDibs, these items begin at $4,800 and can go as high as $6,900, while a piece like these, on average, fetch $5,850.

Recently Viewed

View All