Polished Aluminum Empire Lamp with Hand-Made Felt Shade by Daughter Mfg

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

These aluminum Teardrop Sconces have an outer shell that is made from two halves made from 6101 aluminum that have been joined together using a pin and groove joinery. The material i...

These drawer pulls by Daughter Manufacturing are 2" in diameter, made of solid brass, spun into a shell and filled with tinted epoxy. This size provides the ultimate comfort of use a...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

Extraordinary mid-century table lamp made of teak and with aluminum shade. Great Scandinavian design. Made in Denmark. Very high quality processing. Base and neck are made of solid ...

Stunning vintage Italian modern Lucite and chrome table lamp with polished aluminum shade, chrome shaft, and solid Lucite and chrome stacked discs by Noel B.C. Italy. Beautiful condition, keeping in mind that this is vintage and not new so will have signs of use and wear. The shade has a few dings & creases from use in our opinion it does not detract from its amazing look. The lamp retains its original cord with inline switch. It is in perfect working condition. There are no outstanding flaws in the lucite and there is a slight darkening in the chrome somewhat like tarnish and cleaning has not removed, but it does not detract from its over-all beauty. Please see photos and zoom in for details. We attempt to portray any imperfections. Circa, 1970’s. Note: Shipping is possible via parcel which may reduce shipping costs. Mamma Mia...

20" hand-made raffia lamp shade in a custom empire-style size. Standard washer/spider fitting.

Awesome Machine Age Industrial aluminum and brass table lamp with aluminum shade.

Postmodern pair of table lamps in polished aluminum. The lamps have two sockets each and were likely made in the late 20th century. In great vintage condition with age-appropriate we...

Hand craft metal lamp with glass dish and owl over looking from its perch and match holder signed "Eastern Artisan Germany".