Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 11

Mid-Century Pedestal Dining Table by Dřevotvar Jablonné, 1960s, Restored

$1,379.92
£1,017.64
€1,150
CA$1,905.66
A$2,090.97
CHF 1,094.31
MX$25,732.70
NOK 13,786.71
SEK 12,913.31
DKK 8,758.66

About the Item

An authentic mid-century modern pedestal table, produced in the 1960s by Dřevotvar Jablonné, one of the most respected Czechoslovak furniture manufacturers of the era. This elegant table stands on a single pedestal base, a rare and desirable design that embodies the light, sculptural aesthetics of mid-century interiors. The top is finished with exquisite natural wood veneer, restored to bring out its warm tones and striking wood grain. A valuable addition to any mid-century modern interior or design collection. Shipping quote on request.
  • Creator:
    Dřevotvar Jablonné (Manufacturer)
  • Dimensions:
    Height: 29.14 in (74 cm)Diameter: 41.34 in (105 cm)
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1960
  • Condition:
    Refinished. Wear consistent with age and use.
  • Seller Location:
    Praha, CZ
  • Reference Number:
    Seller: MaPr 406 11stDibs: LU2456346556132

More From This Seller

View All
1960s Beech Dining Table, Czechoslovakia
By Dřevotvar Jablonné
Located in Praha, CZ
- Made in Czechoslovakia - Made of beech, veneer. - The table is Stabil - Good condition. - Cleaned.
Category

Vintage 1960s Czech Mid-Century Modern Dining Room Tables

Materials

Wood

Midcentury Conference Table by Dřevotvar, 1960s
Located in Praha, CZ
- Made in Czechoslovakia - Made of oakwood, mahogany veneer - Maker: Drevotvar - Restored - Very good condition.
Category

Vintage 1960s Czech Mid-Century Modern Conference Tables

Materials

Wood

Midcentury Dining Table by Dřevotvar, 1970s
By Dřevotvar Jablonné
Located in Praha, CZ
- Made in Czechoslovakia - Made of wood - Frame fixed - Dimension of extendable: Width 180 cm. - Good, original condition.
Category

Vintage 1970s Czech Mid-Century Modern Dining Room Tables

Materials

Wood

Mid-Century Round Folding Dining Table, Czechoslovakia, 1950
Located in Praha, CZ
Made in Czechoslovakia Made of wood Designer: in the style of Jindrich Halabala The possibility of folding up to 158 cm Original condition.
Category

Vintage 1950s Czech Mid-Century Modern Dining Room Tables

Materials

Glass, Wood

Midcentury Dining Table by Dřevotvar, 1970s
By Drevotvar
Located in Praha, CZ
- Made in Czechoslovakia - Made of wood - Good, original condition.
Category

Vintage 1970s Czech Mid-Century Modern Dining Room Tables

Materials

Wood

Midcentury Restored Dining Table Designed by Jindřich Halabala, 1950
By Jindřich Halabala
Located in Praha, CZ
- Made in Czechoslovakia - Made of oak, walnut - miss one desk, not extending - Good, original condition.
Category

Vintage 1950s Czech Mid-Century Modern Dining Room Tables

Materials

Wood

You May Also Like

Mid-Century Modern Round Dining Table, Denmark, 1970s
Located in GNIEZNO, 30
The table was produced in Denmark in the 1970s. Table top made of jatobe veneer. The furniture is after a comprehensive carpentry renovation, cleaned of the old coating, finished wi...
Category

Vintage 1970s Danish Mid-Century Modern Dining Room Tables

Materials

Aluminum

Mid-Century Teak Modern Round Dining Table, Denmark, 1970s
Located in GNIEZNO, 30
The table was produced in Denmark in the 1970s. Table top made of teak. The furniture is after a comprehensive carpentry renovation, cleaned of the old coating, painted oak stain, fi...
Category

Vintage 1970s British Mid-Century Modern Dining Room Tables

Materials

Teak

Midcentury Pedestal Dining Table by Poul Cadovius for France and Son
By Poul Cadovius, France & Søn
Located in Brooklyn, NY
This stunning circular pedestal table features mid-century mid of aluminum and rosewood finish. Designed by Poul Cadovius for France and Son, the Scandinavian modern appeal of this c...
Category

Vintage 1960s Danish Mid-Century Modern Dining Room Tables

Materials

Metal

Mid-Century Teak Modern Round Dining Table, Denmark, 1970s
Located in GNIEZNO, 30
The table was produced in Denmark in the 1970s. Table top made of teak . The furniture is after a comprehensive carpentry renovation, cleaned of the old coating, finished with high-q...
Category

Vintage 1970s Danish Mid-Century Modern Dining Room Tables

Materials

Aluminum

Edmondo Palutari for Dassi Mid-Century Italian Teak Round Dining Table, 1950s
By Edmondo Palutari, Vittorio Dassi
Located in Puglia, Puglia
This table was designed by the famous Italian designer Edmondo Palutari for Vittorio Dassi, using teak wood, in Italy in the 1950s. The table can be op...
Category

Vintage 1950s Italian Mid-Century Modern Dining Room Tables

Materials

Teak

Franco Albini TL30 Round Table in Metal and Wood by Poggi 1950s
By Poggi, Franco Albini
Located in Montecatini Terme, IT
TL30 table with a round top in wood and a base in black lacquered metal, designed by Franco Albini and produced by Poggi in the 1950s. After spending his childhood and part of his youth in Robbiate in Brianza, where he was born in 1905, Franco Albini moved with his family to Milan. Here he enrolled in the Faculty of Architecture of the Polytechnic and graduated in 1929. He starts his professional activity in the studio of Gio Ponti and Emilio Lancia, with whom he collaborates for three years. He probably had his first international contacts here In those three years, the works carried out are admittedly of a twentieth-century imprint. It was the meeting with Edoardo Persico that marked a clear turning point towards rationalism and the rapprochement with the group of editors of “Casabella”. The new phase that that meeting provoked starts with the opening of the first professional studio in via Panizza with Renato Camus and Giancarlo Palanti. The group of architects began to deal with public housing by participating in the competition for the Baracca neighborhood in San Siro in 1932 and then creating the Ifacp neighborhoods: Fabio Filzi (1936/38), Gabriele D’Annunzio and Ettore Ponti (1939). Also in those years Albini worked on his first villa Pestarini. But it is above all in the context of the exhibitions that the Milanese master experiments his compromise between that “rigor and poetic fantasy” coining the elements that will be a recurring theme in all the declinations of his work – architecture, interiors, design pieces . The opening in 1933 of the new headquarters of the Triennale in Milan, in the Palazzo dell’Arte, becomes an important opportunity to express the strong innovative character of rationalist thought, a gym in which to freely experiment with new materials and new solutions, but above all a “method”. Together with Giancarlo Palanti, Albini on the occasion of the V Triennale di Milano sets up the steel structure house, for which he also designs the ‘furniture. At the subsequent Triennale of 1936, marked by the untimely death of Persico, together with a group of young designers gathered by Pagano in the previous edition of 1933, Franco Albini takes care of the preparation of the exhibition of the house, in which the furniture of three types of accommodation. The staging of Stanza per un uomo, at that same Triennale, allows us to understand the acute and ironic approach that is part of Albini, as a man and as a designer: the theme addressed is that of the existenzminimum and the reference of the project is to the fascist myth of the athletic and sporty man, but it is also a way to reflect on low-cost housing, the reduction of surfaces to a minimum and respect for the way of living. In that same year Albini and Romano designed the Ancient Italian Goldsmith’s Exhibition: vertical uprights, simple linear rods, design the space. A theme, that of the “flagpole”, which seems to be the center of the evolution of his production and creative process. The concept is reworked over time, with the technique of decomposition and recomposition typical of Albinian planning: in the setting up of the Scipio Exhibition and of contemporary drawings (1941) the tapered flagpoles, on which the paintings and display cases are hung, are supported by a grid of steel cables; in the Vanzetti stand (1942) they take on the V shape; in the Olivetti store in Paris (1956) the uprights in polished mahogany support the shelves for displaying typewriters and calculators. The reflection on this theme arises from the desire to interpret the architectural space, to read it through the use of a grid, to introduce the third dimension, the vertical one, while maintaining a sense of lightness and transparency. The flagpole is found, however, also in areas other than the exhibition ones. In the apartments he designed, it is used as a pivot on which the paintings can be suspended and rotated to allow different points of view, but at the same time as an element capable of dividing spaces. The Veliero bookcase...
Category

Vintage 1950s Italian Mid-Century Modern Tables

Materials

Metal