Pair of China red lacquered “Diamond” chairs by Harry Bertoia, 1950
About the Item
- Creator:Harry Bertoia (Designer),Knoll (Manufacturer)
- Design:
- Dimensions:Height: 27.56 in (70 cm)Width: 35.44 in (90 cm)Depth: 29.14 in (74 cm)
- Sold As:Set of 2
- Materials and Techniques:
- Period:
- Date of Manufacture:circa 1950
- Condition:Wear consistent with age and use.
- Seller Location:Roma, IT
- Reference Number:1stDibs: LU6911237061062
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American modernism. Among furniture aficionados he is known for the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952. As an artist, Bertoia is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America. There, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at Cranbrook, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became, and remain, perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass. As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
- ShippingRetrieving quote...Ships From: Roma, Italy
- Return PolicyA return for this item may be initiated within 7 days of delivery.
- Pair of Mid-Century armchairs, Edmondo Palutari for Dassi Mobili Moderni, 1950sBy Edmondo Palutari, Dassi Mobili ModerniLocated in Roma, RMPair of Mid-Century armchairs. Attributed to Edmondo Palutari for Dassi Mobili Moderni, Italy 1950 Product details Covered with Dedar fabric. Wooden structure. Dimensions 50 L x 78 H...Category
Vintage 1950s Italian Armchairs
MaterialsFabric, Wood
- Pair of Alky armchairs by Giancarlo Piretti for Castelli, 1970By Castelli, Giancarlo PirettiLocated in Roma, RMPair of Alky armchairs by Giancarlo Piretti for Castelli, 1970 Product details Dimensions: 63 W x 69 H x 75 D cmCategory
Vintage 1970s Italian Armchairs
MaterialsMetal
- Set of bench and 2 armchairs in black lacquered rush with leather bindingsLocated in Roma, RMSet of bench and 2 armchairs in black lacquered rush with leather bindings, 1970s Bench dimensions 114 L x 77 H x 70 D cm – seat height 30cm Armchair dimensions 60 L x 76 H x 70 D cm...Category
Vintage 1970s European Armchairs
MaterialsLeather, Rush
- Pair of armchairs, McGuire San Francisco 1970By McGuireLocated in Roma, RMPair of armchairs #McGuire San Francisco 1970 Product details Made of wood and fabric, with leather bindings. Dimensions: 63w x 78h x72d cm Production: McGuire, San Francisco 1970.Category
Vintage 1970s American Armchairs
MaterialsLeather, Fabric, Wood
- Pair of Mid-Century armchairs in Dedar fabricLocated in Roma, RMPair of Mid-Century armchairs in Dedar fabric - Deja Vu Jamais / Ivory Dimensions of the single armchair: 50 W x 78 H x 56 D cm Materials: wood, cotton Production: 1950s Italian man...Category
Vintage 1950s Italian Armchairs
MaterialsTextile, Wood
- Pair of 1960s swivel armchairs covered in Dedar fabricLocated in Roma, RMPair of 1960s swivel armchairs covered in Dedar fabric Single armchair dimensions: 75 W x 77 H x 75 D cm Sold as set of 2.Category
Vintage 1960s Italian Armchairs
MaterialsMetal
- Pair of White Harry Bertoia "Diamond Chairs" Produced by Knoll, 1950sBy Harry BertoiaLocated in Stockholm, SERare set of two "Diamond Chairs" designed by Harry Bertoia and produced by Knoll in the late 1950s. In good vintage and original condition with signs from age and use. Both chairs ar...Category
Vintage 1950s Italian Mid-Century Modern Armchairs
MaterialsMetal
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Harry Bertoia, KnollLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1250€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- PAIR of Diamond Chairs by Harry BERTOIA, KNOLL INTERNATIONALBy Harry BertoiaLocated in Berlin, BerlinA pair of original Diamond Chairs, designed by Harry Bertoia. U.S.A., Knoll International, 1970s Early production Diamond chairs in white and black painted metal with rust-orange ve...Category
Vintage 1970s American Mid-Century Modern Armchairs
MaterialsMetal
- Pair of Four White Harry Bertoia "Diamond Chairs" Produced by Knoll, 1950sBy Harry BertoiaLocated in Almelo, NLA set of four of 1960s "421" Diamond chairs by Harry Bertoia for Knoll, in white with contrasting black legs. More information about the designer: Harry Bertoia's finest achieve...Category
Vintage 1950s American Mid-Century Modern Armchairs
MaterialsMetal