Early Set of 3 Verner Panton Cone Swivel Dining Chair Mid Century Modern
About the Item
- Creator:Verner Panton (Designer)
- Design:Cone ChairCone Series
- Dimensions:Height: 34 in (86.36 cm)Width: 23 in (58.42 cm)Depth: 21.5 in (54.61 cm)Seat Height: 19 in (48.26 cm)
- Sold As:Set of 3
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:Circa 60s
- Condition:Wear consistent with age and use. Good condition with age appropriate wear. These will most certainly need to be reupholstered as original fabric is worn and dated. One base is different-see photos. Some minor oxidation to bases-all plastic glides are present.
- Seller Location:Pemberton, NJ
- Reference Number:1stDibs: LU943236318962
Cone Chair
Simple geometric shapes don’t often cause seismic shifts in furniture design. The bold Cone chair, conceived by mid-century Danish architect and designer Verner Panton (1926–98), however, brought about just such a transformation.
After graduating from Copenhagen’s Royal Danish Academy of Fine Arts in 1951, Panton secured a mentorship in the office of renowned architect Arne Jacobsen. There, he contributed to the development of Jacobsen’s revolutionary Ant chair. Slender, lightweight and stackable, with a one-piece laminated-veneer seat that rested on three plastic legs, the 1952 design mirrored the elegant form of its insect namesake. The Ant chair had a significant effect on Panton, who went on to explore the possibilities of Plexiglas and synthetics, rather than working in the solid teak and oak that occupied his contemporaries.
The influence of Jacobsen’s work is evident in Panton’s Cone chair, which he debuted at his father’s restaurant in southern Denmark in 1958, six years after leaving the architect’s office. The designer was revamping the eatery, and the chair — with its artful, pod-like shell set upon a stainless-steel swivel base and its comfortable seat upholstered in soft red fabric to comfort hungry diners — was a key element in his (typically radiant) overhauled interiors.
Panton’s renovation dazzled reporters and patrons, including entrepreneur Percy von Halling-Koch, who created a company to produce the Cone chair. Its unusual form — an inverted cone seeming to balance on its point — caused a sensation in Denmark and beyond. Displayed in a Manhattan store window, the chair incited such a furor on the city’s crowded streets that the police had the shop owners remove it from public view.
Today, Verner Panton's Cone chair is manufactured by Swiss furniture company Vitra and continues to delight design connoisseurs.
Verner Panton
Verner Panton introduced the word “groovy” — or at least its Danish equivalent — into the Scandinavian modern design lexicon. He developed fantastical, futuristic forms and embraced bright colors and new materials such as plastic, fabric-covered polyurethane foam and steel-wire framing. And Panton’s ebullient Pop art sensibility made him an international design star of the 1960s and ’70s. This radical departure from classic Danish modernism, however, actually stemmed from his training under the greats of that design style.
Born on the largely rural Danish island of Funen, Panton studied architecture and engineering at Copenhagen’s Royal Danish Academy of Fine Arts, where the lighting designer Poul Henningsen was one of his teachers. After graduating, in 1951, Panton worked in the architectural office of Arne Jacobsen, and he became a close friend of Hans Wegner's.
Henningsen taught a scientific approach to design; Jacobsen was forever researching new materials; and Wegner, the leader in modern furniture design using traditional woodworking and joinery, encouraged experimental form. Panton opened his own design office in 1955, issuing tubular steel chairs with woven seating. His iconoclastic aesthetic was announced with his 1958 Cone chair, modified a year later as the Heart Cone chair. Made of upholstered sheet metal and with a conical base in place of legs, the design shocked visitors to a Copenhagen furniture fair.
Panton went on to successive bravura technical feats. His curving, stackable 1960 Panton chair, his most popular design, was the first chair to be made from a single piece of molded plastic. Three years later, he introduced the S model, the first legless chair crafted from a single piece of plywood, cantilevered on a round metal base. Panton would spend the latter 1960s and early ’70s developing all-encompassing room environments composed of sinuous and fluid-formed modular seating made of foam and metal wire. He also created a series of remarkable lighting designs, most notably his Fun chandeliers — introduced in 1964 and composed of scores of shimmering capiz-shell disks — and the Space Age VP Globe pendant light of 1969.
As you will see from the offerings on 1stDibs, Verner Panton’s designs are made to stand out and put an eye-catching exclamation point on even the most modern decor.
- ShippingRetrieving quote...Ships From: Pemberton, NJ
- Return PolicyA return for this item may be initiated within 1 day of delivery.
- Pair of Restored Chrome-Base Swivel Chairs, Mid-Century ModernBy SeligLocated in Pemberton, NJGorgeous pair of totally restored chrome base swivel chairs. A sumptuous shade of high end woven turquoise fabric has been chosen for the upsc...Category
Vintage 1960s American Mid-Century Modern Lounge Chairs
MaterialsWood
- Harvey Probber Swivel Barrel Back Lounge Chairs Mid-century ModernBy Harvey ProbberLocated in Pemberton, NJGORGEOUS PAIR OF HARVEY PROBBER STYLE SWIVEL BARREL BACK LOUNGE CHAIRS. THESE CHAIRS RETAIN THEIR ORIGINAL VINTAGE HEAVY BLUE WOVEN UPHOLSTERY IN NICE CONDITION. THE BASES ARE EXTR...Category
Vintage 1960s American Mid-Century Modern Club Chairs
MaterialsUpholstery, Wood
- Chrome Steelcase Swivel Lounge Chairs Mid-Century Orange MohairBy Gardner Leaver, SteelcaseLocated in Pemberton, NJAmazing pair of Platner style chromed steel swivel lounge chairs with orange mohair. These chairs are so gorgeous in person-i just want to take a bite out of them-like yummy candy. T...Category
Vintage 1970s American Mid-Century Modern Swivel Chairs
MaterialsChrome
- Fun Set of Four Midcentury "S" Chairs Designed by Verner PantonBy Verner PantonLocated in Pemberton, NJThis stylish and fun set of four "S" style dining chairs feature the contemporary modern style of Verner Panton. Cantilever style bases and impressive vintage style make this matchin...Category
Vintage 1970s Danish Mid-Century Modern Dining Room Chairs
MaterialsBrass
- Fun Set of Six Panton Inspired Italian Black Lacquered Dining Chairs Mid-CenturyBy Verner PantonLocated in Pemberton, NJFantastic fun set of six Panton style black lacquer dining chairs. The upholstery is in gorgeous condition being a vinyl covered Panton design. The black lacquered frames only show l...Category
Vintage 1980s Italian Mid-Century Modern Dining Room Chairs
MaterialsLacquer, Upholstery, Wood
- Fun Panton Inspired Stacking Cube Etagere Mid-century ModernBy Verner PantonLocated in Pemberton, NJSuper fun Panton inspired stacking cube etagere. 4 brightly lacquered cubes stack one on top of each other to create a real show stopping etagere.Category
Vintage 1960s American Mid-Century Modern Shelves
MaterialsPlastic
- Cone Chair by Verner PantonBy Verner Panton, Plus-LinjeLocated in Highland, INA Classic Panton design, the cone chair is petite, sculptural, playful and surprisingly comfortable. This vintage example is newly upholstered in a brick red fabric with a nice weave.Category
Vintage 1950s Danish Mid-Century Modern Chairs
MaterialsSteel
- Pair of Verner Panton Cone ChairsBy Fritz Hansen, Verner PantonLocated in Brooklyn, NYNice early pair of Panton's pop Classic. Original upholstery, one in navy one in purple for Fritz Hansen.Category
Vintage 1960s Danish Swivel Chairs
MaterialsUpholstery
- Verner Panton "Wire Cone" ChairBy Verner PantonLocated in Los Angeles, CAVerner Panton "Wire Cone" chair designed in 1958 and produced by Plus-Linje. I have three of these chairs.Category
Vintage 1950s Danish Scandinavian Modern Swivel Chairs
MaterialsMetal
- Vintage Cone Chair, Verner Panton StyleBy Verner PantonLocated in Miami, FLVintage cone chair on wheels in the style or by Verner Panton. Upholstered in green fabric.Category
Vintage 1950s Danish Mid-Century Modern Swivel Chairs
MaterialsAluminum, Steel
- Pair Vintage Mid-Century Modern Red Cone Chairs Verner Panton for Fritz HansenBy Fritz Hansen, Verner PantonLocated in Topeka, KSMagnificent vintage mid-century modern pair of red Cone chairs by Verner Panton for Fritz Hansen comprised of red hopsacking covered bent sheet metal frames, loose round seat cushions, and 4 prong swivel chrome bases with black glides. This piece has been attributed based upon archived research including online sources, vintage documentation and catalogs, designer literature, and other materials. Beautiful condition, keeping in mind that these are vintage and not new so will have signs of use and wear. We have found no outstanding flaws. Please see photos and zoom in for details. We attempt to portray any imperfections. Circa, 1970-1980’s. MY. OH. MY…. What have we HERE??? This is a phenomenal pair of iconic “Cone Chairs” by Verner Panton for Fritz Hansen!!! The Cone chair was originally designed by Verner Panton in Denmark in 1957. As the name suggests, the body of the chair takes the form of a cone. Standing on its tip, a semi-circular padded shell extends upwards to form the back and armrests, thereby creating a very comfortable and eye appealing armchair. This pair is comprised of fabric covered sheet metal frames bent into a cone shape, gorgeous bright red hopsacking with white stitching, a loose round seat cushion, and a flat 4-prong chrome base with swivel feature and black glides. If you remove the round seat you can view inside the cone base. An original set of red cone chairs much like ours debut in Verner Panton’s father’s restaurant called “Kom Igen” (meaning: Come Again in Danish) in 1958. How COOL is that?? And a fun little history fact on the Cone chair is that it was originally manufactured by Percy Von Halling-Koch who founded the company “Plus Linje” specifically to produce the Cone chair. In the 70’s, they were manufactured by Fritz Hansen, until 2004 when Swiss manufacturer “Vitra” took over… and they still produce them today. Ours are definitely vintage and throughout our extensive research we believe they were made in the Fritz Hansen era. In a statement made by Verner Panton’s friend Niels-Jorgan Kaiser, he explains the design of the Cone chair as “a ballet dancer standing on her toes and easily turning pirouettes’, supported by a flat four-star base.” His genius to use the geometric form and outstanding bright colors were beyond his time, which was a breakthrough in the history of chair design. And his designs are still classic. They are mid-century modern in style with an Atomic or Mod flair, although they are made in Denmark… so they also have a bit of Scandinavian SASS, and they are sure to make a statement in any room of your home. They would be FABULOUS in a game room, at the counter of your indoor bar...Category
20th Century Danish Mid-Century Modern Swivel Chairs
MaterialsSheet Metal
- Pair of 1970s Verner Panton Cone Chairs by Plus LinjeBy Verner PantonLocated in Handewitt, DEPair of Cone chairs by Verner Panton for Pluslinje Denmark. Original upholstered with velour fabric. Denmark 1970s. In very good vintage condition.Category
Vintage 1970s Danish Scandinavian Modern Swivel Chairs
MaterialsVelvet
Recently Viewed
View AllRead More
113 Chairs That Prove Danish Design Isn’t Limited to Denmark
In an innovative display, the Designmuseum Danmark is permanently exhibiting the 20th century's most iconic seats.
Verner Panton’s Bold Designs From the 1960s and ’70s Are Showing Up Everywhere
From high-fashion runways to a brand-new book, the groovy, futurist work of this groundbreaking Danish creative is receiving newfound — and much deserved — attention.