Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 11

Gio Ponti Singer & Sons Model 2134 Walnut & Brass Flip Top Dining Console Table

$18,000
£13,822.27
€15,856.32
CA$25,292.11
A$28,325.57
CHF 14,779.82
MX$345,984.65
NOK 188,042.29
SEK 177,252.40
DKK 118,333.78

About the Item

Designed by Italian architect Gio Ponti, this table embodies the very soul of Italian Mid-Century Modern. Italian descends from many important historical movements, such as the rich history of Roman architecture, and more recently the Renaissance centuries ago. Following the explosion of the Mid-Century movement, it was only a matter of time until Gio Ponti gained critical acclaim in his work. A groundbreaking architect, his work was a massive departure from the classical buildings seen out of Italy before him. With an almost German rigor, his work now stands today as some of the best Italian design around. This table follows the same footsteps that made his architecture incredible. It is deceptively sophisticated. Four carved walnut oval legs support a walnut top, which flips out and extends to a depth of 38" from 19" for use as a dining table or a console table. It looks incredible as either. The tapered legs are tipped with brass sleeves, allowing the look to remain light. Studio-made in Italy, it was imported in the 1950s and sold by Singer & Sons. In very good vintage and original condition. Light normal use.
  • Creator:
    Gio Ponti (Designer),M. Singer & Sons (Manufacturer)
  • Dimensions:
    Height: 29.25 in (74.3 cm)Width: 64 in (162.56 cm)Depth: 38 in (96.52 cm)
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    circa 1950s
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: JYA1stDibs: LU1273239625552

More From This Seller

View All
Milo Baughman for Directional Dining Table in Walnut, Rosewood, Ash w/ 2 Leaves
By Milo Baughman, Johnson Furniture Company, Directional
Located in Philadelphia, PA
Made in the Unites States in the 1960s, this piece was manufactured by Johnson Furniture Co. and sold by Directional, who consistently sold smash hits from the likes of Paul Evans an...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Hardwood, Ash, Rosewood, Walnut

Paul McCobb for Lane 'Delineator' Walnut Extension Dining Table with 3 Leaves
By Paul McCobb, Lane Furniture
Located in Philadelphia, PA
Made here in the USA by Lane Furniture, this table was designed by Paul McCobb, renowned as an extraordinarily prolific American designer. With a 42" circular top in its smallest for...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Metal

Mid Century Modern Dining Room Table in Walnut by Arthur Umanoff
By Arthur Umanoff, Dillingham Manufacturing Company
Located in Philadelphia, PA
A clean line dining table by Arthur Umanoff circa 1960's. It features beautiful walnut wood construction. It comes with one 18 inch leaves not...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Walnut

Massive Mid Century American Studio Modern Walnut & Travertine Dining Table
Located in Philadelphia, PA
A monumental 10 x 5 foot dining table in solid walnut and inlayed travertine circa 1960's. This table was studio made in the mid twentieth century....
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Travertine

Unusual Rastad & Relling for Gustav Model R3 Rosewood Dining Table with 2 Leaves
By Adolf Relling and Rolf Rastad
Located in Philadelphia, PA
Designed and made in Norway, this dining table features a wonderful combination of great Norwegian design and awesome production quality. With frame made of walnut hardwood, it featu...
Category

Vintage 1960s Norwegian Mid-Century Modern Dining Room Tables

Materials

Rosewood, Walnut

Restored Hans J. Wegner for Andreas Tuck AT-319 Drop-Leaf Rosewood Dining Table
By Andreas Tuck Møbelfabrik, Hans J. Wegner
Located in Philadelphia, PA
This incredible table was designed by Danish legend Hans J. Wegner for production by Andreas Tuck Mobelfabrik, who was responsible for many of Wegner's early designs and established the precedent of exceptional build quality we know from Wegner pieces today. There were a few versions of this table, some in other woods, but all of them smaller. We have the largest version of this table ever produced, the AT-319, which extends up to just shy of 10 feet long with both drop-leaf panels attached and deployed. This is also a rosewood model, long held as the most desirable. The quality of this table is among the best from the era. Easily comparable to other exceptional pieces by Wegner, Finn Juhl, and Fritz Hansen. The base is entirely chrome plated steel with precision-manufactured steel bars added for support. The hinges for the drop-leaves are also of steel. Beneath the table, the mechanism for the sliding panels which hold the leaves up is crafted of solid wood and securely mounted the top with tens of screws. The classic attention to detail by Andreas Tuck has resulted in bookmatched rosewood both atop and beneath the table, a measure not taken by other factories for cost-saving. There were absolutely no cost-saving measures for this table's production. This table is in original condition, but will receive a complete restoration upon purchase. This involves a laborious process, including careful hand-sanding and chemical stripping of the top. A new finish is applied with industrial-grade tools, then sealed using a clear lacquer. Finally, it will spend hours in the polishing booth, resulting in an exceptional shine. When complete, this table will look better than it did new. Our in-house professionals have decades of experience working on the most exclusive pieces. In the last few photos are other pieces that we have restored so that you may get a sense of our work. Nanna Ditzel Rosewood Desk This is the polished finish we think will suit the piece best. It allows the rosewood to shine in full glory and creates incredible contrast. Florence Knoll Rosewood Cabinets...
Category

Vintage 1950s Danish Mid-Century Modern Dining Room Tables

Materials

Steel, Chrome

You May Also Like

Gio Ponti, Walnut Flip-Top Console/Dining Table, model 2134, Singer &Sons, 1950s
By Gio Ponti, M. Singer & Sons
Located in Wargrave, Berkshire
Gio Ponti (Italian 1891-1979) Walnut Flip Top Console/Dining Table Model 2134 for Singer & Sons, 1950s The brass hinged top above a shaped frieze, raised on tapering legs joined by a...
Category

Vintage 1950s Italian Mid-Century Modern Console Tables

Materials

Brass

Gio Ponti for Singer and Sons Model 2135 MCM Walnut Expanding Dining Table
By Gio Ponti, M. Singer & Sons
Located in Countryside, IL
Gio Ponti for Singer and Sons Model 2135 Mid Century Walnut Expanding Dining Table with 4 Leaves This table measures: 48 wide x 48 deep x 28.75 inches high, with a chair clearance o...
Category

Vintage 1970s American Mid-Century Modern Dining Room Tables

Materials

Walnut

Ico Parisi for Singer and Sons Mid Century Walnut and Brass Console Table
By M. Singer & Sons, Ico Parisi
Located in Countryside, IL
Ico Parisi for Singer and Sons Mid Century Walnut and Brass Console Table This console table measures: 71 wide x 19.75 deep x 29.25 inches high All pieces of furniture can be had i...
Category

Vintage 1970s Italian Mid-Century Modern Console Tables

Materials

Brass

Gio Ponti Dining Table in Veneered Walnut, Italy 1940s
By Gio Ponti
Located in Hellouw, NL
This exceptional dining table, designed by the legendary Gio Ponti in the early 1940s, is a stunning example of Italian craftsmanship and design. Featuring a rectangular top veneered...
Category

Vintage 1940s Italian Mid-Century Modern Dining Room Tables

Materials

Wood, Walnut

Walnut, Glass, and Brass Console Table Designed by Gio Ponti
By Gio Ponti
Located in Stamford, CT
A walnut console table designed by Gio Ponti. Having a grid etched into the glass top with ribbed legs terminating in brass sabot. Designed for the "F.A. home" in Palermo. Produced i...
Category

Vintage 1930s Italian Modern Console Tables

Materials

Walnut

Gio Ponti Tiered Walnut Side Table For Singer & Sons
By M. Singer & Sons, Gio Ponti
Located in Brooklyn, NY
This fantiastic, mid-century modern two-tier end / side table was designed in the 1950s for Singer & Sons by the extremely popular Italian designer Gio Ponti. The solid walnut frame ...
Category

Mid-20th Century Italian Mid-Century Modern Side Tables

Materials

Walnut