Europe - Chairs

Two very cool chairs designed by W.H.Gispen for the Dutch company KEMBO. The chairs are from the ‘innovative’ 1950s and they show it. The chairs are stil...

Whimsical set consisting of four fine Italian-made leather chairs belonging to the 1960s. The frame is made of chrome-plated steel and has a single foot of semi-rectangular shape, in...

Comfortable and elegant, the Mayet Chair combines the warmth of premium leather with the strength of hand-welded steel. The contrasts between these high end materials, along with the...

FF Cantilever, chair Design: Friends & Founders Upholstery available in a wide range of fabrics and leathers Model shown (fabric): Nevotex, Dakar 0842 Legs: 4 legs or cantilever ...

Set of 4 dark blue fibreglass chairs. Stamped Herman Miller (see photo). These are the Eiffels legs. One chair has been repaired and is still a bit damaged (see photo). Wear due to t...

The Wanderlust contemporary chaise lounge belongs to a collection of minimalist and serene pieces where exclusivity and precision are shown in small details such as the hand-turned m...

Lounge / Office chair, designed by Johannes Foersom and Peter Hiort-Lorenzen, manufactured by Erik Jørgensen from the 1960s. The chair comes with nice gray fabric, which will be comp...

And Objects, product design studio founded by Martin Brudnizki and Nick Jeanes based in London. A contemporary twist on the Classic upholstered dining chair, the Abbas dining chair...

FF 4-Legs, chair Design: Friends & Founders Upholstery available in a wide range of fabrics and leathers Model shown : VIDAR 3 - KVADRAT 1880 Black + 1511 White, Black frame Legs...

1950?s Original Tolix Model A Dining Outdoor Chairs – Set Of Six (1643) 1950?s Original Tolix Model A Dining Outdoor Chairs ? Set Of Six. Tolix is one of our all time favourite companies. In 1907 Frenchman Xavier Pauchard discovered that he could protect sheet metal from rusting by dipping it in molten zinc (galvanisation) and a few years later he set up his factory producing steel furniture. Tolix was the creator and founder of perhaps the most iconic cafe chair of all time, the Tolix model A, designed in 1934 and sadly now copied worldwide. This is a set of six rich dark green chairs...

Sculptural Post Modern chairs, France 1980s. The chairs are constructed out of a black lacquered tubular steel frame and thin shaped metal wires used...

Mid-Century Modern French set of four chrome dining room chairs covered with its original zebra fabric. 1970s The set is in really good vintage conditi...

Design chair realized in metal with a white or black coloured structure completely hand-crafted by artisan and carachterized by the iconic arch shape. This beautiful Mongolia chairs...

Black lacquer wooden structure adorned with woven cane panels and armchair.

1950s Design Style sculptural and gorgeous armchair all in black lacquered rattan peacock structure with beige linen fabric cushions

A relaxing miracle for all desires. Low- or high-backed chairs with a slender star base, as dining chairs or lounge chairs, for uplifting seating comfort with the highest esthetic st...

The elegant and exclusive Pendolo chairs combine elementary but at the same time audacious geometries giving life to a singular sits with five legs. The wood material is revisited through a superficial burn process. The italian artisans make use of the ancient Japanese technique called Shou Sugi Ban, in which the surface is burned with a high flame and making it assume that characteristic color. The material takes on a different connotation by telling a path and assuming forms independent from the hand of...

Dining patio chairs, lacquered steel, Italy, 1960s This collection of patio chairs from Italy has a strikingly refined design that is emblematic of the quintessential Italian patio ...

Group of 4 chairs; chromed metal tubular, foam padding and leather upholstery.

Fable, outdoor hanging armchair The whole design of this beautiful outdoor hanging armchair was developed according to the following structure: -Sus...

These Oxford chairs are used and are newly upholstered with black classic leather and fitted with new foam cushions. The chairs have firm backs and no defects despite some minor scra...

The Hug contemporary barstool with backrest (set of 2) is designed and conceived with a light aesthetic, the slight oscillation of the steel rod of 12 mm is complemented by the flexi...

A set of seven chairs, model 3207, with arms in dark brown colored leather designed by Arne Jacobsen in 1955 and manufactured by Fritz Hansen. The ...

Born in one of the Royal Parks of London, Angela Brigid Lansbury was one prestigious Hollywood stars of the 50s. Inspired by the Hollywood Golden Era a...

The Toy armchair by Driade is a sophisticated yet subtly playful armchair designed by the preeminent Philippe Starck. Crafted with molded polypropylen...

Antique George III carved mahogany elbow/desk chair having a wonderful shaped carved top and rail with open lattice work splat and shaped open arms, newly reupholstered drop in seat....

Expoxi finished Indoor and outdoor.

Poul Kjærholm for E. Kold Christensen, pair of lounge chairs model 'PK20', leather, chrome-plated steel, Denmark, 1968 A highly modern design that embraces clear lines and curvaceous shapes. A cantilever chair is all about ease and comfort as it provides the characteristic bending function, and together with the high backrest and head cushion, a pleasant seating experience is guaranteed. Kjærholm used chrome-plated steel for the base and black leather for the seating, materials that fit within the modernistic aesthetics of this chair. Poul Kjærholm (1929-1980) was a Danish designer and cabinetmaker. He had a particular interest in different construction materials; especially steel which he considered a natural material with the same artistic fineness as other natural materials. Poul Kjaerholm was employed at Fritz Hansen for about a year, where he designed a number of noteworthy chair prototypes. In 1955 Poul Kjærholm initiated his collaboration with manufacturer Ejvind Kold Christensen, which lasted until Poul Kjærholm's death in 1980. In 1982, Fritz Hansen took over the production and sales of "The Kjærholm Collection", developed from 1951 to 1967, designs, which are logical to the minute detail with an aura of exclusivity. In 2007 Fritz Hansen added two new pieces to the Kjærholm Collection. Pieces that were never in production before, the PK8...

Exploring the boundaries between art and design, the 9.5° Chair is a result of studying Plato’s notion of the ideal chair. Subject to a creative process of experimentation, the 9.5° Chair transcends our expectations, becoming more than a simple form that follows function. Features – The sculptural chair is fully functional for seating – Featured as the museum chair...

Botera High chair is padded with four different types of foam, following the chair's design focus of comfort. A chunky cushion forms the base from which the high or low backrest is d...

Black rubber and chrome plated steel 'P40' dining chair designed by Giancarlo Vegni & Gianfranco Gualtierotti for Fasem, Italy, c.1980. Dime...

Fable Outdoor Hanging Armchair Hold by premium outdoor leather straps, this inviting grey hanging armchair will allow quality outdoor moments without any concerns. The whole design...

1960s Scandinavian design style armchair with brass structure, black wooden finishes and bouclé fabric back and seat.

FF 4-legs, chair Design: Friends & Founders Upholstery available in a wide range of fabrics and leathers Model shown (fabric): Nevotex, Dakar 0842 Legs: 4 legs or cantilever Blac...

Pair of iron chairs by the artist Ugo Trevisan (1904-?), with perforated iron decoration and carved face at the top of the seat, circa 1960, 120 x ...

New French wrought iron painting set of garden bistro outdoor Indoor & Outdoor The price includes two chairs and one white marble top table. Available ...

This model is called Z-chair. Designed in 1968 in the GDR by Ernst Moeckl and Siegfried Mehl, German Version of the Panton chair. Also called kangaroo chair or variopur chair. Produc...

We are delighted to offer for sale this lovely pair of oversized, Chesterfield tufted, Oxblood leather Gainsborough side chairs A very good looking and expertly crafted pair, the...

Set of 6 fonding chairs "clack" model, designed by Lucci& orlandini for italian Lamm. Sold with their original base with wheels, they are made with an iron structure and plastic sea...

Egg Chair and ottoman in black leather by Arne Jacobsen for Fritz Hansen produced in 2016. The Egg chair by Arne Jacobsen hardly needs an introduction, considering it is one of the ...

Beautiful and rare Italian post modern cockpit shape leather and steel side chair, 1980s Chair or small armchair with round seat in black sky and back in satin steel rod with three-l...

The Hi pad chair, and accompanying Hi pad stool, are the result of a production process that represents the perfect balance between technology and artisan...

The Hi pad chair, and accompanying Hi pad Stool, are the result of a production process that represents the perfect balance between technology and artisan...

Easy to stack, to a maximum of 6 pieces, the Tate chair designed by Jasper Morrison is part of a range that includes chairs and stools. This series has a ba...

The “Repose” contemporary counter stool belongs to a collection that revisit the director chair collection, serene pieces where exclusivity and precision are shown in small details s...

4 black lacquered chairs, 1970s

Set of 10 Gio Ponti 699 Superleggera by Cassina in black Manufactured since 1957, the Superleggera wood chair is the rare combination of the architec...

Mammamia high barstool with die-cast aluminum shell, steel structure and rubber-covered footrest. Lacquered, not for outdoor use. Non stackable. Availab...

Vintage style and MCM 1970s French Design all in black bouclé fabric and brush brass base swivel armchair. The matching swivel footstool is available too a...

Contemporary fiberglass chair - Roly Poly Dining Chair by Faye Toogood. This is shown in the charcoal fiberglass finish. Design: Faye Toogood ...

Timeless charm and simple elegance set this chair apart. Entirely upholstered in mocha brown velvet, this design is a perfect balance of modern materials and classic shapes, featuring slender legs with brass ferules, rounded backrest, and a spacious square seat. Versatile and comfortable, this dining chair will complete a sophisticated but not overly formal dining room...

Set of six 605 Quinta chairs with a black steel rod frame seat and back in bent perforated sheet metal. Designed by Mario Botta for Alias in 1985 (This chair is no longer in production). The Quinta chair it's an architecture you can sit on, this design clearly shows the inspiration of iconic designer as Le Corbusier, Louis Kahn, and Carlo Scarpa, an exemplary of this iconic chair is also exhibited at the Museum of Modern Art. Mario Botta was born in 1943 in Mendrisio. After working as an apprentice draughtsman for the Lugano-based architect Tita Carloni, he moved first to Milan and then to Venice, where he enrolled at the department of Architecture at the IUAV. He completed his degree in 1969 with a thesis tutored by Carlo Scarpa – after having met Le Corbusier and Louis Kahn, who were later to be sources of inspiration – and returned to Switzerland to open his own professional firm, which at the time dealt mainly with detached family private homes. These included the villas in Riva San Vitale (1971-1973), Ligornetto (1975-1976) and Morbio Superiore (1982-1983), in which Botta treated the theme of the home as a refuge, which protects and reassures its inhabitants. These were buildings with a character that was ironic and, in a certain sense, monumental, obtained for example (in the case of Morbio) through rigorous symmetrical compositions and a particular use of raw concrete blocks set in a linear pattern and alternated with strips of silvered brick which, on the contrary, were set at 45 degrees. Partially dug into the hillside, the villa was also characterised by a theme which was particularly dear to Botta and which had already been explored in Riva San Vitale; the net distinction between solids and voids, the latter appearing to have been dug out of the building. Between 1980 and 1990, Botta associated with artists and intellectuals from all walks of life and took numerous long trips abroad. Together with Gabriele Basilico and Edoardo Sanguinetti, he published “La Casa Rotonda”, and he became friends with Max Huber, Nicki de Saint Phalle, Dante Isella, Harld Szeemann, Robert Frank and Alberto Flammer. In 1986, the MoMA in New York dedicated a solo exhibition to his work, and the Swiss architect received his first contracts for public buildings and from abroad, debuting with the Cultural Centre in Chambéry (1984-1987). In Japan, on a challenging triangular lot of only one hundred and sixty square metres, a space which remained from the opening of a new highway, Botta built a small building which, with its clarity and strength of image, attempted to stand out in the midst of the chaos that surrounded it, thanks to a thick masonry curtain raised on the main façade, in which slabs of grey marble are crossed with horizontal fissures which erode the angles and cancel the perception of the number of floors which make up the museum. The church of Mongo, on the other hand, was the first step in a long series of places of worship, including designs for the churches of Pordenone (1987-1992) and Sartiana (1987-1995), for the cathedral of Evry (1988-1995), for the basilica of Santa Maria degli Angeli on Mont Tamaro (1990-1996, for the Giovanni XXII church in Seriate (1994-2000) and for the Cymbalista synagogue in Tel Aviv (1996-1998). In each of these, light plays a predominant role as a prime generator of space and a measure for the definition of time that passes with the various phases of the day, the months and the seasons. Light is, however, the main symbolic element, representing through its variations the uneasiness of humankind in the face of divine perfection. In this same period, the scheduling for the construction of a new School of Architecture, the Mendrisio Academy, took place. Inaugurated in 1996, it offered an alternative approach to teaching in contrast to the Swiss University system, in which an important role is played by humanistic subjects and by a copious group of well-known international professors: from Rykwert to Benevolo, Burkhart, Campos Baeza, Dal Co, Frampton, Mendes da Rocha...

Chair Luigi Caccia Dominioni.

This pair of armchairs from the “Series 186” is also known as the “Lufthavns-stole” (Airport chairs). The model was designed in 1969 for Cado Collection. The aluminium frame is without a doubt the most dominant feature of these chairs. The sturdy frame is injection-moulded and polished to resist tear and wear. The overall look, with the exposed bolts and material recalls the modern industrial style. This is softened by the padded seats and backs that are upholstered in black leather, completing the elegant, modern look. Functionality was evidently in the focus when designing the “186” series, which comprises of seven different parts that can be used in different combinations. The variety of modules enables them to fit into any space. These “Airport Chairs” are often claimed to be made by France & Son, however, in 1966 the company was sold to Poul Cadovius, thereafter known as Cado. Condition: In good vintage condition. Wear consistent with age and use. Reupholstered with black leather. Each of our items can be re-upholstered by our in-house atelier in a fabric of choice. Dimensions: 25.39 in W x 30.90 in D x 29.72 in H; Seat Height 15.35 in 64,5 cm W x 78,5 cm D x 75,5 cm H ; Seat height 39 cm About the designer: Adrian Heath (1923-) is an architect who studied at The School of Architecture in London (1951) and was subsequently employed by Hvidt & Molgaard. Ditte...

The ribbon chair is the object that expresses the female language of Nika Zupanc with a strong and essential icon. In black, white, pink and the new gold and rose gold versions the r...

Jenette is a moulded chair made of rigid structural polyurethane, and with a metallic core. Its backrest is covered in about 900 flexible stalks made of ...

Egon Eiermann chair Modell SE 68 for Wilde & Spieth. This is the brighter seating version .It is not stackable. Brown Hopsak fabric and black feet. Produced in 1993 and in good co...

Italian Design; Lacquer; Leather; Leather Straps; Cushions; Lounge Chair; Two-Seater; 1970s; Mid-Century Modern; Comfortable Italian low lounge chairs designed in the 1970s. The ...