Bent Plywood Chairs

English, 1960s A stylish set of four modernist, interlocking, chairs. Made from plywood and beech. In very good condition.

Scarce bent plywood ‘Bodyform’ children’s chairs. ca. 1980.

The Model ST 664 Bent Plywood Side Chair by Eddie Harlis (1928-1985) for Thonet is a true work of art.

Seldom seen chair of bent white lacquered teak plywood chairs from the 1960s.

Rare pair of George Mulhauser Plycraft bent plywood floating lounge chairs on horseshoe bases.

Set of 2 bent plywood chairs 70s. Probably made by Pastoe.

These unusual Kinetics bent plywood chairs were made in the 1980s, although their look is Mid-Century Modern.

For your consideration a set of four dining chairs. Sculptural walnut plywood with chrome plated hardware. Stamped "DIXI" retailer in Mexico City during the 1960s.

The bent teak plywood ‘Hammer’ children’s chair was designed by Arne Jacobsen for Fritz Hansen.

For your consideration, Late 1950s Molded Wood Chair after Eames Herman Miller Knoll marvelous midcentury chair Sculptural black Iron base Features Molded Teak seat and back rest. No...

Seldom seen pair of bent teak plywood chairs from 1966. Label intact.

Original, Mid-Century Modern, Piretti Xylon bent plywood chair with cast aluminum spring back.

Early Eames DCW Mid-Century Modern bent plywood chair by Evans Products Pre-Herman Miller.

Pair of bent plywood chairs laquered black.

Rare set of six bent plywood chairs designed by Cherner for Plycraft.

Set of six bent plywood chairs produced by Herman Miller and designed by Charles Eames.

The backrests are made of bent plywood. Chairs have been completely restored.

The backrests are made of bent plywood. Chairs have been completely restored.

This set of six modernist bent plywood chairs with chrome tubular legs were designed by Biagio Cisotti, Sandra Laube for Italian firm Plank have zebra wood design in the wood.

Bent plywood chair covered in walnut veneer made up of five pieces of wood joined with rubber bumpers and metal screws.

A limited production bent plywood chair with black painted steel frame and legs by designer Jean Prouve.

Stackable Mid-Century school chairs. Bent plywood slipper seat sits on an enameled black frame.

A simple and modern looking rocking chair in the style of Alvar Alto.

1960s, Swedish design, swivel chair in original good condition. Bent plywood, steel.

Wood & Metal Toledo Chair - Bent Plywood. Seat Height - 18 1/4", Overall Height - 31 3/4", Depth - 17 1/2", Width - 15 1/2".

Set of 3 plywood chairs from early 20th century. The chair is set on wooden frame and has a profiled one-piece seat-back element made of plywood with incredibly detailed and beautifu...

Set of Four Bent Plywood & Metal Dining Chairs. Wood has been refinished to original condition.

An inventive design by the Italian Gigi Sabadin, this chair is made of bent plywood with a veneered finish.

Bent plywood, metal. Manufactured in Italy, 1950s-1960s.

Vintage Bent Plywood Toledo Stool
Min seating height 25"
Max seating height 32"

Vintage Bent Plywood Toledo Stool
Min seating height 25"
Max seating height 32"

Vintage Bent Plywood Toledo Stool
Min seating height 22"
Max seating height 26"

Vintage Bent Plywood Toledo Stool
Min seating height 22"
Max seating height 29"

Simple and simply beautiful stacking chairs made with molded bent plywood shells and dark gray tubular enameled metal legs and frames.

Gorgeous Tatra lounge chair with bent stained wood frame. Elegantly curved arm rests, 1960s Czechoslovakia. Newly upholstered in granny apple green velvet. Frame in good original con...

Created out of a single piece of molded plywood is this side chair designed by Ray Komai for J.G.

Original, Mid-Century Modern, Piretti Xylon bent plywood dining or side chair with cast aluminum spring back.

Vintage Mid-Century Modern Hans Wegner Style Bent Plywood 3 Leg Shell Chairs - Pair These chairs have well crafted black fabric cushioned backs and seats with a celebrated design a...

Paul and John Carter for Carter Brothers Mid Century orange and walnut bent plywood scoop chair Chair measures: 23 wide x 28 deep x 29 high This piece is available in what we call r...

These chairs would be great for a restaurant or cafe'. Solid bent plywood frames with a light terracotta colored seat and back.

We are delighted to offer for sale this Contemporary suite of four bent plywood and chrome dining chairs A very good looking and expertly crafted set, they are a medium back heigh...

Known as the "Model 102" chair, these very rare steam-formed bent plywood side chairs were designed by Herbert Von Thaden and Donald Lewis Jordan for their company, Thaden-Jordan Fur...

For your consideration: Pair of Stackable Chairs-2- in Bent Plywood Birch Blonde Wood circa 1990s Off the chart modern sculptural design.

Carlo Ratti , a rare bent ply chair, Italian circa 1950's to 1960's the seat pivots and the feet are adjustable to adapt to any floor irregularities.

Bent beech plywood armchair produced by Enraf Nonius in Delft during the 1970s demonstrates the influence of Alvar Aalto's pioneering work with laminated wood.

Solid bent plywood frames with a light terracotta colored seat and back.

Group of four chairs; bent plywood, lacquered metal base. Good conditions; may shows light signs of wear; may have gone through restoration works.

Classic chair SE40 from the 1950s by Egon Eiermann for Wilde & Spieth made of bent ash plywood.

A rare and unusual mid-20th century bent plywood table with two chairs. We are unsure of designer or maker however, the set has been well made and designed.

1950s plywood swivel desk chair by Carlo Ratti, Italy, Mid-Century Modern.

A black bent plywood LCM (lounge chair metal) chrome framed chair with nylon feet designed by Ray and Charles Eames manufactured by the Herman Miller Furniture Company.

Cor Alons 16 dining chairs bent plywood honey comb in color. These chairs are very organic shaped and hard to find.

The chair is made of oak wood construction with seat and backrest in bent plywood.

Structure: Made from Poplar Burl veneer with solid oak edging, the Park Nightstand is finished with matching veneer on both the exterior and interior. The inside includes an adjustab...

Mobile kinetic chandelier made of patinated brass with a round counterweight and two enlighten alabaster globes. Original design by Glustin Luminaires.

Hans-Agne Jakobsson 'Tratten' darkly patinated outdoor sconce. An exclusive made for U.S. and UL listed authorized re-edition of the classic Swedish design executed in richly and d...

Gino Sarfatti model no. 2065 ceiling lamp for Astep. Designed in 1950, this is an authorized re-edition by Alessandro Sarfatti, grandson of Gino Sarfatti, who applies his grandfathe...

We are delighted to present this stunning bowl-shaped pendant light / uplight plafoniere / flush mount light fixture dating back to the 1950s. (Actually there were three pieces avail...

Four Mid-Century stacking armchairs in the style of Fritz Hansen's institutional seating line. Each chair features a single pressed and bent teak veneer shell with an organic, waiste...

Travertine dining table Made to order in Italy Round top Honed or polished finish Rounded or straight edges Travertine pedestal. The photos show a selection of tables we have m...

Pair of armchairs Unusual shaped frame Boucle upholstery Normally carried in stock in Italy but can be made to order if not. Several different fabric options are available. Seat ...

Vintage Dining Chairs by Thonet, Beech Saddle Seat Dining Chairs, Bentwood, C. 1940s, Kitchen, Mid Century Modern, MCM Measurements: 15ʺW × 18ʺD × 33.5ʺH Some minor imperfections o...

19th century French farmhouse table, steeped in the tradition of rural France’s art populaire craftsmanship. This unique piece features generously sized drawers on each side offering...

Mario Marenco 'Marenco' 3 Seater Sofa 255 for Arflex. New, current production. The unmistakable design and wide modularity still make the Marenco sofa a must-have in contemporary f...

The iconic "DSC 106" stacking chair designed by the renowned Giancarlo Piretti for Castelli. Chair features plastic-sheathed legs, contoured Oak plywood seat & back, and stylish ...