Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 7

Hans J. Wegner Teak and Oak Drop Leaf Dining Table

About the Item

This stunning Danish modern dining table was designed by Hans J. Wegner for Andreas Tuck in the 1950s. The beautifully banded teak table top stands on a solid, quarter- sawn oak base. Each side of the table offers hardware to support leaves. Table expands to 93.5" in length. Recently refinished and in excellent condition.
More From This SellerView All
  • Hans Wegner GE-526 Dining Table, Laminate Table Top in Oak with Legs in Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1970, the 526 dining table features unparalleled craftsmanship. Flawless joinery throughout. This table is hand built at GETAMA’s factory in Ged...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak

  • Hans Wegner GE-526 Dining Table, Veneered Table Top in Oak with Legs in Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1970, the 526 dining table features unparalleled craftsmanship. Flawless joinery throughout. This table is hand built at GETAMA’s factory in Ged...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak

  • Hans Wegner GE - 83/88 Coffee Table, Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1980, the 83/88 coffee table features unparalleled craftsmanship. This table is hand built at GETAMA’s factory in Gedsted, Denmark by skilled ca...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Beech

  • Hans Wegner GE, 1937 Coffee Table, Stained Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1980, the 83/88 coffee table features unparalleled craftsmanship. This table is hand built at GETAMA’s factory in Gedsted, Denmark by skilled ca...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak

  • Hans Wegner GE-526 Dining Table, Laminate Top in Oak with Legs in Stained Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1970, the 526 dining table features unparalleled craftsmanship. Flawless joinery throughout. This table is hand built at GETAMA’s factory in Ged...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak

  • Hans Wegner GE-526 Dining Table, Veneered Top in Oak with Legs in Stained Oak
    By Hans J. Wegner, GETAMA
    Located in Berkeley, CA
    Designed by Hans Wegner for GETAMA in 1970, the 526 dining table features unparalleled craftsmanship. Flawless joinery throughout. This table is hand built at GETAMA’s factory in Ged...
    Category

    21st Century and Contemporary Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak

You May Also Like
  • Restored Hans J. Wegner for Andreas Tuck AT-319 Drop-Leaf Rosewood Dining Table
    By Hans J. Wegner, Andreas Tuck Møbelfabrik
    Located in Philadelphia, PA
    This incredible table was designed by Danish legend Hans J. Wegner for production by Andreas Tuck Mobelfabrik, who was responsible for many of Wegner's early designs and established the precedent of exceptional build quality we know from Wegner pieces today. There were a few versions of this table, some in other woods, but all of them smaller. We have the largest version of this table ever produced, the AT-319, which extends up to just shy of 10 feet long with both drop-leaf panels attached and deployed. This is also a rosewood model, long held as the most desirable. The quality of this table is among the best from the era. Easily comparable to other exceptional pieces by Wegner, Finn Juhl, and Fritz Hansen. The base is entirely chrome plated steel with precision-manufactured steel bars added for support. The hinges for the drop-leaves are also of steel. Beneath the table, the mechanism for the sliding panels which hold the leaves up is crafted of solid wood and securely mounted the top with tens of screws. The classic attention to detail by Andreas Tuck has resulted in bookmatched rosewood both atop and beneath the table, a measure not taken by other factories for cost-saving. There were absolutely no cost-saving measures for this table's production. This table is in original condition, but will receive a complete restoration upon purchase. This involves a laborious process, including careful hand-sanding and chemical stripping of the top. A new finish is applied with industrial-grade tools, then sealed using a clear lacquer. Finally, it will spend hours in the polishing booth, resulting in an exceptional shine. When complete, this table will look better than it did new. Our in-house professionals have decades of experience working on the most exclusive pieces. In the last few photos are other pieces that we have restored so that you may get a sense of our work. Nanna Ditzel Rosewood Desk This is the polished finish we think will suit the piece best. It allows the rosewood to shine in full glory and creates incredible contrast. Florence Knoll Rosewood Cabinets...
    Category

    Vintage 1950s Danish Mid-Century Modern Dining Room Tables

    Materials

    Steel, Chrome

  • Hans J Wegner, Danish Teak & Oak Drop-Leaf Dining Table by Andreas Tuck, 1950s
    By Andreas Tuck, Hans J. Wegner
    Located in Wargrave, Berkshire
    Hans J Wegner, Danish Teak & Oak Drop-Leaf Dining Table by Andreas Tuck, 1950s Designed by Hans J Wegner in 1950 and manufactured by cabinetmaker Andreas Tuck in Demmark, this is th...
    Category

    Vintage 1950s Danish Mid-Century Modern Dining Room Tables

    Materials

    Brass

  • 1960s Hans J. Wegner AT-316 Extension Dining Table in Teak
    By Hans J. Wegner, Andreas Tuck Møbelfabrik
    Located in Glendale, CA
    1960s Hans J. Wegner AT-316 Extension Dining Table in Teak. An incredibly refined and cleverly designed extendible table designed by the legendary Wegner for Andreas Tuck. Executed i...
    Category

    Vintage 1960s Danish Scandinavian Modern Dining Room Tables

    Materials

    Teak

  • Teak and Oak Extension Dining Table by Hans J. Wegner
    By Johannes Hansen, Hans J. Wegner
    Located in Sagaponack, NY
    A rectangular dining table with a teak top concealing steel and brass pullouts and an innovative hidden leaf storage on a fumed oak base with splayed, tapered dowel legs. Two leaves ...
    Category

    Vintage 1950s Danish Scandinavian Modern Dining Room Tables

    Materials

    Brass

  • Extendable Danish Teak Dining Table by Hans Wegner for Andreas Tuck
    By Hans J. Wegner, Andreas Tuck Møbelfabrik
    Located in St-Brais, JU
    This is a beautiful and very rare large edition of model AT 310. A dining table designed by Hans J. Wegner, produced by Andreas Tuck in Denmark. Equipped with 2...
    Category

    Mid-20th Century Danish Scandinavian Modern Dining Room Tables

    Materials

    Teak

  • Hans J. Wegner Danish Modern Teak Drop-Leaf Dining Table, Newly Refinished
    By Andreas Tuck, Hans J. Wegner
    Located in South Bend, IN
    A rare and exceptional Danish Modern drop-leaf dining table By Hans J. Wegner for Andreas Tuck Denmark, 1950s Teakwood top, on tapered dowel oakwood legs with arched aprons....
    Category

    Vintage 1950s Danish Mid-Century Modern Dining Room Tables

    Materials

    Oak, Teak

Recently Viewed

View All